11/2 HP Model 150 JOB:
Item No.:
FOOD WASTE DISPOSER SPECIFICATIONS CORROSION RESISTANT BODY
Permanent molded from heat treated aluminum alloy.
EXTENDED LIP WATER SEAL
Protects the motor from damage by water.
TAPERED ROLLER BEARING
Provides longer motor life, quiet operation and shock absorbing.
WATER COOLED MOTOR
Provides maximum efficiency and longer life.
QUIET OPERATION
Extra thick rubber mounting adaptor and drain outlet isolates sound and eliminates vibration.
Cone Assembly TABLE CUT-OUT: 12” CONE - 12 7/8” 15” CONE - 15 7/8” 18” CONE - 18 7/8”
ALL PIPING ½" OPTIONAL CONE COVER
VACUUM BREAKER SOLENOID VALVE W/ WATER FLOW CONTROL
½" FIXED
NEMA 4 Watertight Controls
NOZZLE
SCRAP RING
DISPOSER CONTROL
FOOD WASTE DISPOSER
2" DRAIN
MSS
NOTE: INSTALL PER ALL APPLICABLE CODES
MRSS
FULL LOAD AMPS
ARSS-2
ARSS
Optional Line Disconnect (LD) available on MSS, MRSS, & ARSS
q q q q q q
115 Volts
1 Phase
22.9 Amps
208 Volts
1 Phase
11.8 Amps
230 Volts
1 Phase
11.6 Amps
208 Volts
3 Phase
6.2 Amps
230 Volts
3 Phase
5.6 Amps
460 Volts
3 Phase
2.6 Amps
u SPECIFY EXACT OPERATING VOLTAGE u
Salvajor Model 150
Food Waste Disposer 1½ HP – 1 Phase & 3 Phase D
E
T
A
I
L
S
A
N
D
D
I
M
E
SPECIFICATIONS: MOUNTING – Rubber adaptor above grind chamber and rubber drain outlet isolates sound and eliminates vibration. No metal to metal contact.
EXTERIOR HOUSING – Permanent molded from
heat treated, corrosion resistant aluminum alloy then computer machined to a smooth polished finish. Paint free.
SHREDDER – 8 inch diameter, machined high strength, wear resistant hardened carbide alloy.
N
WASTE OUTLET – Rubber drain accepts 2” piping.
15" (38.10)
55/8" (14.29)
61/2" (16.51)
1 /2" NPT WATER INLET 81/2" (21.64)
13" (33.02)
21 7/16" (54.48)
2" DRAIN
ASSEMBLIES: (See Specification Sheet)
CA – Cone Assembly with 12”, 15” or 18” Cone SA – Sink Assembly with 3 1⁄2” or 6 1⁄2” Sink Collar
DISPOSER CONTROLS: (See Specification Sheet) MSS: (Non Reversing) MRSS: (Manual Reversing) ARSS-2: (Automatic Reversing) ARSS: (Automatic Reversing with Water Saver)
141/8" (35.93)
55/8" (14.32)
POWER ENTRANCE
14 7/8" (37.78) 12" (30.48)
RESET BUTTON
3
1 /2" NPT WATER INLET 81/2" (21.64)
2" DRAIN
13" (33.02)
81/2" (21.52)
5 5/8" (14.29)
6 1/2" (16.51)
61/2" SINK MOUNT
31/2" SINK MOUNT
15 13/16" (40.19)
5 5/8" (14.29)
6 1/2" (16.51)
12" CONE 81/2" (21.52)
DUAL DIRECTION GRINDING – Designed to operate in either direction. Direction of rotation can be controlled when installed with automatic reversing controls. Reversing rotation can double cutting teeth life. LEG SUPPORT (Optional) – Single leg, adjustable.
15" CONE
18" (45.72)
3 1/2" (8.89) SINK OPENING
water per minute.
S
17 7/8" (45.40)
efficiency and longer life. Built-in manual reset thermal overload protection. Available in 208 volts or 115/ 230 volts, 60 cycle, 1 phase and 208-230/460 volts, 60 cycle, 3 phase.
WATER REQUIREMENT – 5 gallons of cold
N
20 13/16" (52.89)
MOTOR – 1½ HP totally enclosed. Water cooled for
SEAL – Extended Lip Water Seal.
O
/2" FIXED NOZZLE
1
high strength, wear resistant hardened carbide alloy.
Sealed ball (bottom)
I
18" CONE
ROTOR – 8 inch diameter with 4 cutter bars, machined
BEARINGS – Tapered roller (top)
S
/4" (1.91)
55/8" (14.32)
91/4" (23.54)
POWER ENTRANCE
6 5/8" (16.83) CUTOUT
ADJUSTABLE LEG (OPTIONAL)
RESET BUTTON
93/16"(23.34) to 14 11/16"(37.29)
NOTE: Dimensions in parenthesis are in centimeters (Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
SAMPLE SPECIFICATION
150 - CA-18 Model
Cone Size Assembly
MSS
(230/60/3)
Disposer Control
Electrical Specs.
u SPECIFY EXACT OPERATING VOLTAGE u
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email:
[email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No.S150 (06-17)
