Background Check Requirements Pennsylvania’s Child Protective Services Law . 1 July 30, 2015 . INFORMATION BULLETIN ONLY – Updated July 30, 2015
150 POINT INSPECTION CHECK SHEET Dealer and Vehicle Information Certified dealer must inspect all items in the inspection form, perform all necessary repairs in
A suitable 'Departmental Responsible Person' should ensure that a regularly check (at least once a month may be more frequent in Student Residences etc) of the fire extinguishers in the building or their area of responsibility is undertaken. This vis
UCL Fire Technical Note - TN014
Steps to ISO/IEC 17025 Perry Johnson Laboratory Accreditation, Inc. 7/09 Page 2 of 13 Steps to ISO/IEC 17025 Accreditation TABLE OF CONTENTS
PPAP Requirement Check ListPPAP Requirement Check List ... PPAP Requirement Check ListPPAP Requirement Check List ... APQP Paperwork may be required,
As the calendar switches from 2017 to 2018, several new and revised standards will take effect. Some of these standards for the Hospital Accreditation program include
A minimum of one (1) additional EVOT Accredited instructor must be employed for the second eight (8) hours of competency course training, regardless of the number
Leanne S. Hawken, Ph.D. (2009) 1 Leanne S. Hawken, PhD - 2009 1 The Behavior Education Program: A Check-in, Check-out Intervention for Students At Risk
1 Effective 1/1/2017 BACKGROUND AUTOMOBILE TECHNICIAN TRAINING ACCREDITATION PROGRAM The Board of Trustees of the National Automotive Technicians Education Foundation
(To see the scope of accreditation of this laboratory, you may also visit NABL website www.nabi-India.org). Certificate ... Signed for and Oſl behalf of NABL ..... Colorfastness of Textile Materials. IS 2454: 1985 (RA 2006) Blue Wool to Artificial Li
Republic of the Philippines PHILIPPINE POSTAL CORPORATION REGION 7 Requirements for Postal ID application General Requirements 1. Original copy of Birth Certificate
BE1-25 Sync-Check Relay The BE1-25 Sync-Check Relay monitors the voltages on both sides of a circuit breaker and determines that proper phase angle and voltage exist
Check It Off! New Employee Benefits Checklist Rev. 1/2017 Page 1 of 3 Use this checklist as a guide, along with the Insurance Plan Information webpage, to help keep
Check For Understanding Strategy Description Take and Pass Cooperative group activity used to share or collect
GAUGE CHECK P/No. 105.001 – R2 Operating Instructions and OHMS Value Chart GENERAL The Gauge Check is suitable for testing electro-magnetic and bi-metal gauges of
180913 02-03-2017 02-01-2017 ADVANCED PAVEMENT MAINTENANCE 9,818.68 N ... Check Nbr Paid Date Credit Memo Nbr Trans Date Payee Amount 26 EFT
5 Notes & Additional Recommendations Notes & Additional Recommendations 1 Server: In a Dentrix system, the Dentrix server is the computer that will act as a
Headquarters Department of the Army Washington, DC 10 August 2007 Personnel Evaluation Evaluation Reporting System *Army Regulation 623–3 Effective 10 September 2007
Download 1 Feb 2014 ... Determination of the resistance to chemical corrosion by citric acid or other ... Characteristics of the porcelain and vitreous enamel coatings.
Checklist: Aspiration/Aspiration Pneumonia Page 1 of 3 Checklist: Aspiration/Aspiration Pneumonia Check to see whether this person has any of
Processing Fee For Background- Cashier’s check or money order NO PERSONAL CHECKS AND PLEASE MAKE SURE TO FILL OUT YOUR MONEY ORDER!
ACCREDITATION REQUIREMENTS EVALUATION CHECK SHEET
Trading name Registered name Physical Address (Head Office): Responsible person CETA staff member Moderation visit date Ref. No.
Signature Signature Topic
Compliance Yes No
1. The Training Provider is registered according to the applicable legislation 1.1 Registration with Department of Education 1.2 Registered as a legal Entity 2. TRAINER, ASSESSOR , AND MODERATOR DETAILS 2.1 Details of trainers, qualifications and experience and learning programme each trainer is delivering is submitted 2.2 Details of constituent Assessor ,qualifications and experience and learning programme each assessor is assessing is submitted
Remarks
Proposed completion date
2.3 Details of Constituent Moderators, qualifications and experience and registration proof is submitted 3. SAFETY AND HEALTH PRECAUTIONS (Training providers who offer training in electricity unit standards should provider a safety policy on electricity) 3.1 Occupational Health and Safety policy is in place and includes a contingency plan
3.2 Public liability insurance is available
3.3 Fire and theft insurance is available
4.QUALITY MANAGEMENT SYSTEM POLICIES AND PROCEDURES 4.1 Policy Statement is in place outlining the organization education training development aims, objectives. 4.2 Quality management systems that outlines the procedure that implements quality management in the organization, including procedures on document control that outlines the identification, tracking and control of documents is in place 4.3 Quality Management System review policy and procedure that ensures that the QMS policies and procedures are implemented effectively is in place and regularly updated and Reviewed.
5.1 Acceptable monitoring and evaluation methodology for revising, and reviewing and updating of learning programmes is in place. 5.2 Evidence exists for reviewing and updating of training material 6. POLICIES AND PROCEDURE FOR THE MANAGEMENT OF ASSESSMENT 6.1 Assessment design policies and procedures exist 6.2 Assessment policies and procedures outlines the form of assessments that are used and how they are managed is in place. 6.3 Moderation policy and procedures outlining how moderations are to be used and managed is in place 6.4 RPL policy is place and in line with NQF requirements 6.5 Policy is place to review assessment instruments 6.6 Policies and procedures are in place to enable learners to appeal the outcomes of assessments and delivery 7. ADMINISTRATIVE FINANCIAL POLICIES AND PROCEDURE 7.1 Policies and procedures for the capturing and maintenance of learner information and records compiles with the requirements of the NLRD 7.2 Proper financial resources processes is in place
to sustain and conclude all contractual obligations in terms of training provision throughout the accreditation period (e.g. financial statements) 8. POLICIES AND PROCUEDURES FOR THE OFF-SITE PRACTICAL AND WORK SITE MANAGEMENT . 8.1 Policies and practices for the management of off-site practical or work-site components to ensure valid learning experience are in place 9. POLICIES AND PROCEDURES FOR LEARNER SUPPORT AND GUIDANCE 9.1 Learner support policy in place (Before enrolment in program, during learning program and after completion) 9.2 Career path support provided
9.3 Support material for learners available 9.4 Learner counseling available 9.5Translation support available 9.6 Support for learning with special needs is available 10. HUMAN RESOURCES POLICIES AND PROCEDURES 10.1 The following policy documents are confirmed to be in place Staff selection and recruitment Equity policy Communication policy Staff development Disciplinary procedures Grievance procedures Code of conduct
ACCREDITATION (SCOPE OF TRAINING, INFRASTRUCTURE & FACILITIES) ACCREDITATION REQUIREMENTS EVALUATION CHECK SHEET – (site visits) Trading name Registered name Physical Address (Head Office): Responsible person CETA staff member Moderation visit date Ref. No.
Signature
Topic
Delivery of training against NQF unit standards/qualifications 1. SAFETY AND HEALTHY REQUIREMENTS 1.1 Person responsible for Occupational Health and Safety has been appointed. 1.2 Occupational Healthy and Safety policy has been communicated to Staff. 1.3 Learners are informed of the Occupational Health and safety policy. 1.4 Dangerous/hazardous material is clearly indicated 1.5 First aid boxes in work area are available and visible
1.6 Safety signs in work area are available and visible 1.7 Evacuation routes are clearly demarcated
1.8 OHS Act available on site 1.9 No smoking signs on site 2. EQUIPMENT AND FACILITIES FOR TRAINING (CETA Specific) 2.1 Tools are available for the delivery of the qualification and
Signature Compliance Yes No
Comments
Proposed completion date
unit standard of the learning programme. 2.2 Equipment and tools for the assessment of the learning programmes are adequate. 2.3 Equipment and tools used for the delivery and assessment are listed together with a description thereof: 2.4 Facilities and equipment are sufficient to accommodate the numbers of learners enrolled 3. ASSESSMENT, RECOGNITION OF PRIOR LEARNING AND MODERATION 3.1 Evidence exists that the training provider has approved policies and procedures to design assessment instruments 3.2 Assessment instruments were approved by the Moderator before being used 4. TRAINING MATERIAL (LEARNER/PRACTITIONER GUIDES) AVAILABLE 4.1 Facilitator guide is available that will guide the facilitator on how the learning programme will be delivered. 4.2 Learner guide is available with relevant information to cover specific outcomes, essential embedded knowledge and critical cross-filled outcomes.
4.3 Assessment guide is available that will guide the assessor on how to evaluate the learner’s competence against the specific outcomes.
5. MATERIALS AVAILABLE FOR TRAINING 5.1 Learning material is available and that the unit standards which the learning programme is aligned are registered on the NQF. 5.2 Evidence exists for reviewing and updating of training material
5.3 Learning outcomes to be achieved by the learner are clearly defined and documented. 5.4 Formative and Summative assessment are clearly defined 6. TRAINING FACILITIES AVAILABLE FOR TRAINING WHERE APPLICABLE 6.1 Ablution facilities are available 6.2 Training Stations
Training site is available for the delivery of the qualification and unit standard of the learning programme.
6.3 Classroom/instruction room
Classroom is available for the delivery of the qualification and unit standard of the learning programme.
