brands you trust.
Pneumatic Rack and Pinion Actuators www.cranecpe.com Crane ChemPharma & Energy
Design Features & Benefits
Aluminum body with anodized surfaces for superior corrosion protection inside and out
Blow out proof shaft & bushings, no corrosion-susceptible snap rings
Hard anodized alunimum shaft
Position Indicator per NAMUR standard
Maximized gear tooth engagement per Involute Toothing standard
Stainless Steel end cap fasteners
Travel stops in both CW and CCW positions
Self-lubricating piston guide bands are positioned to negate side thrust while providing minimal sliding friction and higher actuator efficiencies
Large air passages allow for maximized speed of operation
ISO 5211 / DIN 3337 mounting
BENEFITS • High Quality and Reliability • Economical • Modular Design allows Flexible Configuration • Improved Plant and Operator Safety • Easy to Maintain and Service
Standardized accessory interfaces per VDI/VDE 3845 (NAMUR)
Polyurethane coated (RAL5002) aluminum end caps for superior corrosion protection
UNIQUE DESIGN FEATURES • Patented, pressure balanced shaft prevent axial forces acting on the bearings. This results in high reliability, long life and low wear. • Shaft and bearing bushings mounted from inside, are of blow-out safe design with no need for external circlips or snap rings providing high operational safety. • Robust anodized aluminum bodies ensure even expansion under thermal influences; no jamming of the piston and a high level of corrosion protection. • Self lubricating piston guide bands made of graphite infused teflon prevent piston tilt under load, provide longer service life due to low friction, with no maintenance required. • Pre-compressed encapsulated springs allow for easier assembly/disassembly and provide an extra layer of safety protection against spring energy release. • Compliance with international interface standards ISO 5211/DIN 3337 and VDE/VDI 3845 (NAMUR). • Simple retrofitting of accessories, such as solenoid valves, limit switch, positioners, etc. • Compact design allows extensive direct mounting orientations.
2
www.cranecpe.com
Product Configuration Code
X
S 180 S 08 B 0 0
00
0 Option Code 4 Option Code 3 Option Code 2 Option Code 1 Travel Stops # Springs Type / Rotation Size Solenoid / Valve Interface Brand
Brand Xomox
Option Code 1 - Temperature X
S
002, 006, 012, 025, 050, 090, 30, 180, 205, 380, 630, 960, H15
Single Travel Stop for Open position (Sizes 002 and 006) Optional external Dual Travel Stops (Sizes 205 to H15)
Consult Factory for Other Options
0 X
Option Code 3 - Shaft / Springs XXX
Travel Stops Dual Travel Stops with -4/+4 degrees of travel adjustment (Sizes 012 to 180)
Anodized Body & Polyurethane finish (RAL 5002) End Caps
D
Sizes Model Sizes:
0 1 2
Option Code 2 - Finish
Solenoid / Valve Interface Imperial - ¼" NPT Air Connection (VDI/VDE 3845 NAMUR) Standard ISO 5211 Interface square (0° offset) Metric - G ¼" BSP Air Connection (VDI/VDE 3845 NAMUR) Standard ISO 5211 / DIN 3337 interface Diamond (45° offset)
Standard -20° to 80°C (-4° to 176°F) Low Temperature -40° to 80°C (-40° to 176°F) High Temperature -20° to 140°C (-4° to 284°F)
Anodized Aluminum Shaft / Standard Springs Anodized Aluminum Shaft / Encapsulated Springs
0 1
Option Code 4 - Mounting Configuration A B C
Standard ISO F Pattern for Each Body Size Consult Factory for Optional Mounting Configurations
OO X
Type / Rotation Double Acting (No Springs) Spring Return, Spring to Close (FCW) Spring Return, Spring to Open (FCCW)
D S A
# Springs Double Acting, No Springs
OO
Spring Return- 01 through 18 (even combinations standard, odd combinations optional)
XX
Crane ChemPharma & Energy
www.cranecpe.com
3
Materials of Construction
4
Pos
Qty
Description
Material
1 2 3 4 5 6xx 7xx 8xx 9xx 10xx 11xx 12xx 13xx 14xx 15xx 16xx 17 18 19 20 21 22 23 24xx 25 26 27 28xx 29xx 30 31xx 32 33 34
1 1 1 1 2 1 1 1 1 1 2 2 2 2 1 2 8 8 1 2 2 2 1 2 1 1 1 1 1 1 1 1 1 6
Body Piston Piston Shaft Spring Cover Bearing - Top Bearing - Bottom Centering Ring Slip Ring Circlip Piston Guiding Tape Piston Guiding Tape O-Ring - Piston O-Ring - End Cap O-Ring - Shaft O-Ring End Cap Screws Washer Shaft head Set Screw Indicator Cap End Position O-Ring Washer Flat Hexagon Nut Pull Rod PTFE Band O-Ring Threaded Bushing O-Ring Washer Flat Hexagon Nut Encapsulated Springs
Aluminum / Anodized Aluminum Aluminum Aluminum / Anodized Aluminum / Painted POM POM Aluminum POM Spring Steel PTFE, 25% Carbon Filled PTFE, 25% Carbon Filled NBR NBR NBR NBR Stainless Steel Stainless Steel POM Stainless Steel Polyamid Polyethelene NBR POM Stainless Steel Nickel Plated Steel PTFE, 25% Carbon Filled NBR Nickel Plated Steel NBR Steel Stainless Steel CrSi, Alloy Coating
www.cranecpe.com
General Specifications Torque Range Double Acting: 66 in-lbs to 107531 in-lbs ( 8.1 Nm to 11752 Nm) Spring Return: 42 in-lbs to 103199 in-lbs (4.5 Nm to 11263 Nm)
Pressure Range Double Acting 40 to 120psig (2.0 to 8.0 bar) Spring Return 87 to 120 psig (5.0 to 8.0 bar), with maximum spring set 43 to 120 psig (2.5 to 8.0 bar), reduced spring quantity
Pressure Media - Air, dry or lubricated and inert gases - For sub-zero applications, take appropriate measures - Mentioned pressure levels are ”gauge pressures”. Gauge pressure is equal to absolute pressure minus atmospheric pressure.
Finish - - - - -
Body: Anodized End Caps: Polyurethane coated RAL shades (60-80 µm) Shaft: Silver Anodized Fasteners: Stainless Steel Bearings: POM
Lubrication - KlÜBER BEM 41-132
Temperature Range - Standard: Nitrile seals (Buna-N rubber): -4F to 176F (-20C to 80C) - Low temperature option: -40F to 176 F (-40°C to 80°C) - High temperature option: -20F to 248F (-20°C to 140°C)
Angle of Rotation - Factory set at 0° to 90°
Crane ChemPharma & Energy
5
Spring Return & Double Acting Actuators 2
Spring Return Actuators
1
1. Standard (Opening) – Air at “A” causes counter clock-wise (CCW) rotation – Positive “Fail Safe” Close on air failure. 1= Central air chamber pressurized
2. Standard (Closing) – Air exhausted from “A” causes clock-wise (CW) rotation Reverse – Pinion can be changed so that Positive “Fail Safe” Open on loss of air. 2= Spring stroke
1 2
Double Acting Actuators 1. Standard (Closing) – Air at “B” causes clock-wise (CW) rotation. 1= Central air chamber pressurized
2. Reverse (opening) - Air at "A" causes counter clock-wise (CCW) rotation. 2= Spring stroke
NOTE: Views are from above
6
www.cranecpe.com
XS 002
Spring Quantity 02 04 06 08 10 12
Spring Start End 16 8 32 16 48 24 64 32 80 40 96 48
40 psig Start End 58 50 50 34 42 18
60 psig Start End 91 83 83 67 75 51 67 35 59 19
80 psig Start End 124 116 116 100 108 84 100 68 92 52 84 36
100 psig Start End 157 149 149 133 141 117 133 101 125 85 117 69
120 psig Start End N/A* N/A* N/A* N/A* N/A* N/A* N/A* N/A* N/A* N/A* N/A* N/A*
XS 006
02 04 06 08 10 12
36 73 109 146 182 219
18 36 55 73 91 109
133 115 97
115 78 42
209 190 172 154 136
190 154 118 81 45
284 266 248 230 211 193
266 230 193 157 120 84
360 342 324 305 287 269
342 305 269 232 196 159
N/A* N/A* N/A* N/A* N/A* N/A*
N/A* N/A* N/A* N/A* N/A* N/A*
XS 012
02 04 06 08 10 12
73 145 218 290 363 435
36 73 109 145 181 218
265 228 192
228 156 83
415 379 342 306 207
379 306 234 161 88
565 529 493 457 420 384
529 457 384 311 239 166
716 680 643 607 571 534
680 607 534 462 389 317
866 830 794 757 721 685
830 757 685 612 540 467
XS 025
02 04 06 08 10 12
142 283 425 566 708 850
71 142 212 283 354 425
515 444 373
444 302 161
808 737 666 595 524
737 595 454 312 170
1100 1030 959 888 817 746
1030 888 746 605 463 322
1393 1322 1252 1181 1110 1039
1322 1181 1039 898 756 614
1686 1615 1544 1474 1403 1332
1615 1474 1332 1190 1049 907
XS 050
02 04 06 08 10 12
259 519 778 1038 1297 1557
130 259 389 519 649 778
952 822 692
822 563 303
1493 1363 1233 1104 974
1363 1104 844 585 325
2034 1904 1774 1644 1515 1385
1904 1644 1385 1125 866 606
2574 2445 2315 2185 2055 1926
2445 2185 1926 1666 1407 1147
3115 2985 2856 2726 2596 2467
2985 2726 2467 2207 1948 1688
XS 090
02 04 06 08 10 12
474 949 1423 1897 2372 2846
237 474 712 949 1186 1423
1820 1583 1346
1583 1109 635
2849 2612 2375 2138 1901
2612 2138 1663 1189 715
3878 3641 3404 3167 2929 2692
3641 3167 2692 2218 1744 1269
4907 4670 4433 4195 3958 3721
4670 4195 3721 3247 2772 2298
5936 5699 5461 5224 4987 4750
5699 5224 4750 4276 3801 3327
XS 130
XRP Double Acting Torques - Imperial Units
02 04 06 08 10 12
719 1437 2156 2847 3593 4312
359 719 1078 1437 1797 2156
2772 2413 2053
2413 1694 975
4338 3978 3619 3260 2900
3978 3260 2541 1822 1104
5903 5544 5185 4825 4466 4107
5544 4825 4107 3388 2669 1951
7469 7110 6750 6391 6032 5672
7110 6391 5672 4954 4235 3516
9034 8675 8316 7957 7597 7238
8675 7957 7238 6519 5801 5082
NOTES: All torque values are inch-pounds for pressure supply listed. Torque values are same for both Spring Fail Clockwise, FCW (XRP style S) & Counterclockwise, FCCW, (XRP style A). Recommended Safety Factor = 20% for single acting actuators. * Max Pressure 100 psig
Crane ChemPharma & Energy
7
40 psig Start End
60 psig Start End
80 psig Start End
100 psig Start End
02 04 06 08 10 12
945 1890 2836 3781 4726 5671
473 945 1418 1890 2363 2836
3643 3170 2698
3170 2225 1280
5701 5228 4756 4283 3810
5228 4283 3338 2393 1447
7759 7286 6813 6341 5868 5396
7286 6341 5396 4450 3505 2560
9816 9344 8871 8399 7926 7453
9344 8399 7453 6508 5563 4618
11874 11401 10929 10456 9984 9511
11401 10456 9511 8566 7621 6676
XS 205
02 04 06 08 10 12
1490 2981 4471 5961 7452 8942
745 1490 2236 2981 3726 4471
5422 4677 3932
4677 3186 1696
8505 7760 7015 6270 5525
7760 6270 4780 3289 1799
11589 10844 10099 9354 8608 7863
10844 9354 7863 6373 4883 3392
14673 13927 13182 12437 11692 10947
13927 12437 10947 9456 7966 6476
17756 17011 16266 15521 14775 14030
17011 15521 14030 12540 11050 9559
XS 380
02 04 06 08 10 12
2237 4475 6712 8949 11186 13424
1119 2237 3356 4475 5593 6712
8137 7018 5900
7018 4781 2544
12765 11646 10528 9409 8290
11646 9409 7172 4934 2697
17393 16274 15155 14037 12918 11799
16274 14037 11799 9562 7325 5088
22020 20902 19783 18665 17546 16427
20902 18665 16427 14190 11953 9715
26648 25530 24411 23292 22174 21055
25530 23292 21055 18818 16581 14343
XS 630
02 04 06 08 10 12
3728 7455 11183 14910 18638 22366
1864 3728 5591 7455 9319 11183
13554 11690 9827
11690 7963 4235
21263 19400 17536 15672 13808
19400 15672 11944 8217 4489
28972 27109 25245 23381 21517 19653
27109 23381 19653 15926 12198 8471
36681 34818 32954 31090 29226 27362
34818 31090 27362 23635 19907 16180
44391 42527 40663 38799 36935 35071
42527 38799 35071 31344 27616 23889
XS 960
Spring
03 06 09 12 15 18
5591 11183 16774 22366 27957 33549
2796 5591 8387 11183 13979 16774
20620 17825 15029
17825 12233 6642
32328 29532 26737 23941 21145
29532 23941 18350 12758 7167
44036 41240 38445 35649 32853 30058
41240 35649 30058 24466 18875 13283
55744 52948 50153 47357 44561 41766
52948 47357 41766 36174 30583 24991
67452 64656 61861 59065 56269 53474
64656 59065 53474 47882 42291 36699
02 04 06 08 10 12
8663 17325 25988 34651 43314 51976
4331 8663 12994 17325 21657 25988
31512 27181 22849
27181 18518 9855
49434 45103 40771 36440 32109
45103 36440 27777 19114 10452
67356 63024 58693 54362 50030 45699
63024 54362 45699 37036 28374 19711
85278 80946 76615 72284 67952 63621
80946 72284 63621 54958 46295 37633
103199 98868 94537 90205 85874 81543
98868 90205 81543 72880 64217 55554
XS 180
Spring Start End
XS H15
XRP Spring Return Torques - Imperial Units
Quantity
120 psig Start End
NOTES: All torque values are inch-pounds for pressure supply listed. Torque values are same for both Spring Fail Clockwise, FCW (XRP style S) & Counterclockwise, FCCW, (XRP style A). Recommended Safety Factor = 20% for single acting actuators.
8
www.cranecpe.com
XRP Double Acting Torques XOMOX XRP DOUBLE ACTING TORQUE (in-lbs) Model
40 psig
60 psig
80psig
100 psig
120 psig
XS 002 D00A XS 006 D00A XS 012 D00B XS 025 D00B XS 050 D00B XS 090 D00B XS 130 D00B XS 180 D00B XS 205 D00A XS 380 D00A XS 630 D00A XS 960 D00A XS H15 D00A
66 151 301 586 1082 2058 3131 4116 6167 9256 15418 23416 35844
99 227 451 878 1622 3086 4697 6173 9251 13883 23127 35124 53765
132 303 602 1171 2163 4115 6263 8231 12334 18511 30836 46832 71687
165 378 752 1464 2704 5144 7828 10289 15418 23139 38545 58540 89609
N/A* N/A* 903 1757 3245 6173 9394 12347 18501 27767 46254 70248 107531
NOTES: All torque values are inch-pounds for pressure supply listed. Recommended Safety Factor = 10% for double acting actuators. * Max Pressure 100 psig
XOMOX XRP DOUBLE ACTING TORQUE (Nm) Model
3 Bar
XS 002 D00A XS 006 D00A XS 012 D00B XS 025 D00B XS 050 D00B XS 090 D00B XS 130 D00B XS 180 D00B XS 205 D00A XS 380 D00A XS 630 D00A XS 960 D00A XS H15 D00A
8.1 18.6 37 72 133 253 385 506 758 1138 1896 2879 4407
3.5 3.5 Bar 9.5 21.7 43 83.5 155 295 449 590.0 884.5 1327.5 2212 3359 5141.5
4 Bar
4.2 Bar
5 Bar
6 Bar
7 Bar
8 Bar
10.8 24.8 49 95 177 337 513 675 1011 1517 2528 3839 5876
11.5 26.4 52.3 101 188.3 358 545.3 717 1074.3 1611.8 2685.8 4079 6243
13.5 31.0 62 119 222 421 642 843 1264 1896 3159 4799 7345
16.2 37.2 74 143 266 505 770 1012 1517 2275 3791 5758 8814
18.9 43.4 86 167 310 589 898 1181 1770 2654 4423 6718 10283
N/A* N/A* 99 191 364 673 1026 1350 2023 3033 5055 7677 11752
NOTES: All torque values are Newton-meters for pressure supply listed. Recommended Safety Factor = 10% for double acting actuators. * Max Pressure 7 Bar
Crane ChemPharma & Energy
9
3.5 Bar
4 Bar
Quantity 02 04 06 08 10 12
Start 1.8 3.6 5.4 7.2 8 10.8
End 0.9 1.8 2.7 3.6 4.5 5.4
Start 7.2 6.3 5.4 4.5
End 6.3 4.5 2.7 0.9
Start End 8.6 7.7 7.7 5.9 6.8 4.1 5.9 2.3
Start End 9.9 9.0 9.0 7.2 8.1 5.4 7.2 3.6 6.3 2.8
Start 10.6 9.7 8.8 7.9 7.0
End 9.7 7.9 6.1 4.3 3.5
Start 12.6 11.7 10.8 9.9 9.0 8.1
End 11.7 9.9 8.1 6.3 5.5 2.7
Start 15.3 14.4 13.5 12.6 11.7 10.8
End 14.4 12.6 10.8 9.0 8.2 5.4
Start 18.0 17.1 16.2 15.3 14.4 13.5
End 17.1 15.3 13.5 11.7 10.9 8.1
Start N/A* N/A* N/A* N/A* N/A* N/A*
End N/A* N/A* N/A* N/A* N/A* N/A*
XS 006
02 04 06 08 10 12
4 8.2 12.2 16.4 20.6 24.6
2 4.1 6.1 8.2 10.3 12.3
16.6 14.5 12.5 10.4
14.6 10.4 6.4 2.2
19.6 17.6 15.6 13.5
17.7 13.5 9.5 5.3
22.6 20.7 18.7 16.6 14.5
20.8 16.6 12.6 8.4 4.2
24.2 22.3 20.3 18.2 16.1
22.4 18.2 14.2 10.0 5.8
29.0 26.9 24.9 22.8 20.7 18.7
27.0 22.8 18.8 14.6 10.4 6.4
35.2 33.1 31.1 29.0 26.9 24.9
33.2 29.0 25.0 20.8 16.6 12.6
41.4 39.3 37.3 35.2 33.1 31.1
39.4 35.2 31.2 27.0 22.8 18.8
N/A* N/A* N/A* N/A* N/A* N/A*
N/A* N/A* N/A* N/A* N/A* N/A*
XS 012
02 04 06 08 10 12
8.3 16.6 24.9 33.2 41.5 49.8
4.1 8.2 12.3 16.4 20.5 24.6
32.9 28.8 24.7 20.6
28.7 20.4 12.1 3.8
39.1 35.0 30.9 26.8
34.9 26.6 18.3 10.0
45.2 41.1 37.0 32.9 28.8
41.0 32.7 24.4 16.1 7.8
48.3 44.2 40.1 36.0 31.9
44.1 35.8 27.5 19.2 10.9
57.5 53.4 49.3 45.2 41.1 37.0
53.3 45.0 36.7 28.4 20.1 11.8
69.9 65.8 61.7 57.6 53.5 49.4
65.7 57.4 49.1 40.8 32.5 24.2
82.2 78.1 74.0 69.9 65.8 61.7
78.0 69.7 61.4 53.1 44.8 36.5
94.5 90.4 86.3 82.2 78.1 74.0
90.3 82.0 73.7 65.4 57.1 48.8
XS 025
02 04 06 08 10 12
16 32 48 64 80 96
8 16 24 32 40 48
64 56 48 40
56 40 24 8
76 68 60 52
68 52 36 20
87 79 71 63 55
79 63 47 31 15
93 85 77 69 61
85 69 53 37 21
111 103 95 87 79 71
103 87 71 55 39 23
135 127 119 111 103 95
127 111 95 79 63 47
159 151 143 135 127 119
151 135 119 103 87 71
183 175 167 159 151 143
175 159 143 127 111 95
XS 050
02 04 06 08 10 12
30 59 89 118 148 178
15 29 44 58 73 88
118 104 89 75
103 74 44 15
140 126 111 97
125 96 66 37
162 148 133 119 104
147 118 88 59 29
173 159 144 130 115
158 129 99 70 40
207 193 178 164 149 134
192 163 133 104 74 44
251 237 222 208 193 178
236 207 177 148 118 88
295 281 266 252 237 222
280 251 221 192 162 132
349 335 320 306 291 276
334 305 275 246 216 186
XS 090
02 04 06 08 10 12
56 112 168 224 280 336
27 53 80 107 134 160
226 200 173 146
197 141 85 29
268 242 215 188
239 183 127 71
310 284 257 230 203
281 225 169 113 57
331 305 278 251 224
302 246 190 134 78
394 368 341 314 287 261
365 309 253 197 141 85
478 452 425 398 371 345
449 393 337 281 225 169
562 536 509 482 455 429
533 477 421 365 309 253
646 602 593 566 539 513
617 561 505 449 393 337
XS 130
XRP Spring Return Torques - Metric Units
02 04 06 08 10 12
84 169 253 337 422 506
41 81 122 162 203 244
344 304 263 223
301 216 132 48
408 368 327 287
365 280 196 112
472 432 391 351 310
429 344 260 176 91
504 464 423 383 342
461 376 292 208 123
601 561 520 480 439 398
558 473 389 305 220 136
729 689 648 608 567 526
686 601 517 433 348 264
857 817 776 736 695 654
814 729 645 561 476 392
985 945 904 864 823 782
942 857 773 689 604 520
XS 002
Spring
Spring
3 Bar
4.2 Bar
5 Bar
6 Bar
7 Bar
8 Bar
NOTES: All torque values are Newton-meters for pressure supply listed. Torque values are same for both Spring Fail Clockwise, FCW (XRP style S) & Counterclockwise, FCCW, (XRP style A). Recommended Safety Factor = 20% for single acting actuators.
10
www.cranecpe.com
XRP Spring Return Torques - Metric Units 3 Bar Start End 453 395 399 284 346 174 293 63
3.5 Bar Start End 538 480 484 369 431 259 378 148
4 Bar Start End 622 564 568 453 515 343 462 232 408 121
4.2 Bar Start End 664 606 610 495 557 385 504 274 450 163
5 Bar Start End 790 732 736 621 683 511 630 400 576 289 523 178
6 Bar Start End 959 901 905 790 852 680 799 569 745 458 692 347
7 Bar Start End 1128 1070 1074 959 1021 849 968 738 914 627 861 516
8 Bar Start End 1297 1239 1243 1128 1190 1018 1137 907 1083 796 1030 685
XS 205
02 04 06 08 10 12
169 337 506 674 843 1011
84 169 253 337 421 506
674 589 505 421
589 421 252 84
801 716 632 548
716 548 379 211
927 842 758 674 590
842 674 505 337 168
990 905 821 737 653
905 737 568 400 231
1180 1095 1011 927 843 758
1095 927 758 590 421 253
1433 1348 1264 1180 1096 1011
1348 1180 1011 843 674 506
1686 1601 1517 1433 1349 1264
1601 1433 1264 1096 927 759
1939 1854 1770 1686 1602 1517
1854 1686 1517 1349 1180 1012
XS 380
02 04 06 08 10 12
253 506 756 1011 1264 1517
126 253 379 506 632 758
1012 885 759 632
885 632 382 127
1202 1075 949 822
1075 822 572 317
1391 1264 1138 1011 885
1264 1011 761 506 253
1486 1359 1233 1106 980
1359 1106 856 601 348
1770 1643 1517 1390 1264 1138
1643 1390 1140 885 632 379
2149 2022 1896 1796 1643 1517
2022 1769 1519 1264 1011 758
2528 2401 2275 2148 2022 1896
2401 2148 1898 1643 1390 1137
2907 2780 2654 2527 2401 2275
2780 2527 2277 2022 1769 1516
XS 630
02 04 06 08 10 12
421 843 1264 1685 2107 2528
211 421 632 843 1053 1264
1685 1475 1264 1053
1475 1053 632 211
2001 1791 1580 1369
1791 1369 948 527
2317 2107 1896 1685 1475
2107 1685 1264 843 421
2475 2265 2054 1843 1633
2265 1843 1422 1001 579
2948 2738 2527 2316 2106 1895
2738 2316 1895 1474 1052 631
3580 3370 3159 2948 2738 2527
3370 2948 2527 2106 1684 1263
4212 4002 3791 3580 3370 3159
4002 3580 3159 2738 2316 1895
4844 4634 4423 4212 4002 3791
4634 4212 3791 3370 2948 2527
XS 960
02 04 06 08 10 12
632 1264 1896 2528 3160 3792
316 632 948 1264 1580 1896
2563 2247 1931 1615
2247 1615 983 351
3043 2727 2411 2095
2727 2095 1463 831
3523 3207 2891 2575 2259
3207 2575 1943 1311 679
3763 3447 3131 2815 2499
3447 2815 2183 1551 919
4483 4167 3851 3535 3219 2903
4167 3535 2903 2271 1639 1007
5442 5126 4810 4494 4178 3862
5126 4494 3862 3230 2598 1966
6402 6086 5770 5454 5138 4822
6086 5454 4822 4190 3558 2926
7361 7045 6729 6413 6097 5781
7045 6413 5781 5149 4517 3885
02 04 06 08 10 12
979 1958 2937 3616 4894 5873
489 979 1468 1958 2447 2937
3918 3428 2939 2449
3428 2449 1470 791
4653 4163 3674 3184
4163 3184 2205 1526
5387 4897 4408 3918 3429
4897 3918 2939 2260 982
5754 5264 4775 4285 3796
5264 4285 3306 2627 1349
6856 6366 5877 5387 4898 4408
6366 5387 4408 3729 2451 1472
8325 7835 7346 6856 6367 5877
7835 6856 5877 5198 3920 2941
9794 9304 8815 8325 7836 7346
9304 8325 7346 6667 5389 4410
11263 10773 10284 9794 9305 8815
10773 9794 8815 8136 6858 5879
XS 180
Spring Start End 111 53 222 107 332 160 443 213 554 267 665 320
XS H15
Spring Quantity 02 04 06 08 10 12
NOTES: All torque values are Newton-meters for pressure supply listed. Torque values are same for both Spring Fail Clockwise, FCW (XRP style S) & Counterclockwise, FCCW, (XRP style A). Recommended Safety Factor = 20% for single acting actuators. * Max Pressure 7 Bar
Crane ChemPharma & Energy
11
Additional Features & Options Visual Indicator The position indicator is per the NAMUR standard providing local 90 degree indication and allows for the connection of a larger limit switch box with indicator.
Limit Stops
Normal open
Adjustable limit stops for both open and closed positions provide 8 degrees of travel protection (4 degrees over-travel / 4 degrees under-travel)
94°
Environmental Protection Various types of coatings are available to help protect the actuator from harsh environmental conditions such as salt spray, chemicals, acids, fire, etc.
90° 86°
4°
Normal closed 0°
-4°
High/Low temperature kits allow the conversion of a standard actuator into either a high temperature version or low temperature version to meet extended operating temperature requirements. The High temperature version incorporates special grease, Viton o-rings, seals, and metallic bearings suitable for operation up to 248 degrees F (120 degrees C) The Low temperature version incorporates special grease, EPDM o-rings, and metallic bearings suitable for operation down to -40 degrees F (-40 degrees C)
Valve Interface Shaft connections meet ISO 5211 standards and are available in square (0 degree offset), diamond (45 degree offset), and double-d for direct NAMUR mounting or bracket/coupling installation. Shaft connection adapters allow reduction to accommodate smaller valve shafts. Centering rings allow compliance with DIN 3337 and are available to make connection to a valve as simple as possible.
Manual Over-Rides Allow the dis-connection of the actuator from the valve so that a manual operation can be performed.
Repair Kits Spare parts kits are available for maintenance/repair or the conversion of a standard actuator to a different configuration.
12
www.cranecpe.com
Crane Sizing Program & Documentation 3rd Party Certification The XOMOX Rack&Pinion (XRP) actuator’s patented dual-piston, 3-point guide band suspension system provides a short, uniform, low-friction, guided stroke for optimum performance. It has been 3rd party tested and certified to operate to over 1 million full open/closed cycles without failure confirming that XRP actuators provide more consistent torque and longer service life than virtually any other actuator. The test was completed by Absorption Research, Inc an independent 3rd party who simulated real world conditions of a XRP actuator operating a Tufline HP butterfly valve. Detailed test results are available from Xomox Product Engineering Test Report Number 13-10-001.
Crane Sizing Program The Crane Sizing Program can be used to quickly determine the proper actuator size for a valve or to work on a number of valves and actuators for a large project. The Quicksize feature allows you to fill in individual valve information and the program will determine the actuator size/configuration required to meet the torque requirements. The Project Worksheet feature allows all the valve and actuator data to be entered/ imported into a spreadsheet format making it easy to generate project quotations. The Engineering Calculation feature allows several different common valve/actuator engineering calculations to be done: • Actuator Torque Tables will calculate the torque output of a selected actuator range at any supply pressure • Speed Calculation can be done by inputting the actuator and process data to determine how quickly the actuator will open/close • Tank Sizing is used to determine the size of an air tank required to operate the actuator after loss of air (failure) • Hot Line Calculation can help to determine what type of actuator seals should be used and the distance the actuator should be mounted away from the process/valve The Control Valve Sizing feature provides a simplified sizing technique for valve flow sizing for gas, liquid, or steam processes, saving a great deal of manual calculation effort to achieve an acceptable level of accuracy.
All of the information generated by the Crane Sizing Program can be printed out in ISA style data sheets.
Crane ChemPharma & Energy
13
Size 012-180 Dimensions
Top View
Side View
Solenoid Valve Interface
Bottom View
SIZE XS012 XS025 XS050 XS090 XS130 XS180
L
G
H
B
C
D
E
R
10.43
0.79
3.58
2.66
1.61
3.15
1.18
1.97
265
20
91
67.5
41
80
30
50
11.42
0.79
4.76
3.23
2.17
3.15
1.18
1.97
290
20
121
82
55
80
30
50
14.37
0.79
5.75
3.70
2.64
3.15
1.18
2.76
365
20
146
94
67
80
30
70
17.72
1.18
6.54
4.29
3.07
5.12
1.18
4.02
450
30
166
109
78
130
30
102
20.67
1.18
7.56
4.53
3.54
5.12
1.18
4.92
525
30
192
115
90
130
30
125
21.06
1.18
8.58
5.08
4.02
5.12
1.18
4.92
535
30
218
129
102
130
30
125
S M6 M6 M8 M10 M12 M12
T
ISO
0.35 9 0.35 9 0.49 12.5 0.63 16 0.71 18 0.71 18
F05 F05 F07 F10 F12 F12
SQ 0.55 14 0.55 14 0.67 17 0.87 22 1.06 27 1.06 27
Inches mm
14
NOTE: Dimensions are in inches and millimeters. Dimensions are nominal. For certified drawings contact factory.
www.cranecpe.com
Size 205-H15 Dimensions
Top View
Side View
Bottom View
SIZE XS205 XS380 XS630 XS960 XSH15
Solenoid Valve Interface
LD
LE
H
B
C
D
R
15.24
19.13
10.71
5.91
4.69
5.12
5.51
387
486
272
150
119
130
140
20.08
23.70
10.71
5.91
4.69
5.12
5.51
510
602
272
150
119
130
140
22.09
29.17
13.54
7.36
6.77
5.12
6.50
561
741
344
187
172
130
165
22.05
29.69
16.61
8.90
8.31
5.91
6.50
560
754
422
226
211
150
165
26.34
34.61
17.72
9.45
8.86
5.91
669
879
450
240
225
150
S M16 M16 M20 M20
T 0.98 25 0.98 25 1.26 32 0.35 32
ISO F25 Only See XS960/XSH15 View
ISO F14 F14 F16 F16*
SQ 1.42 36 1.42 36 1.81 46 1.81 46 2.17 55
Inches
LD = Length of Double-acting Actuator LE = Length of Spring Return Actuator * This Model also has ISO F25 Mounting Pattern
mm
NOTE: Dimensions are in inches and millimeters. Dimensions are nominal. For certified drawings contact factory.
Crane ChemPharma & Energy
15
Crane ChemPharma & Energy
Xomox Headquarters 4444 Cooper Road Cincinnati, Ohio 45242 Tel: 513-745-6000 Fax: 513-745-6086
Xomox International GmbH & Co. OHG Von-Behring-Straße 15, D-88131 Lindau/Bodensee Tel: (49) 8382-702-0 Fax: (49) 8382-702-114
www.cranecpe.com
www.flowoffluids.com
CPE-XOMOX-XRP-BU-EN-A4-2-12-14
brands you trust.
®
Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website information. Crane Co. reserves the right to alter its products without notice, including products already on order provided that such alteration can be made without changes being necessary in specifications already agreed. All trademarks in this material are property of the Crane Co. or its subsidiaries. The Crane and Crane brands logotype, in alphabetical order, (ALOYCO®, CENTER LINE®, COMPAC-NOZ®, CRANE®, DEPA®, DUO-CHEK®, ELRO®, FLOWSEAL®, JENKINS®, KROMBACH®, NOZ-CHEK®, PACIFIC VALVES®, RESISTOFLEX®, REVO®, SAUNDERS®, STOCKHAM®, TRIANGLE®, UNI-CHEK®, WTA®, and XOMOX®) are registered trademarks of Crane Co. All rights reserved.
© 2014 Crane ChemPharma & Energy
