Bulletin 800S
Standard Duty Stations 10
Type 1 or 4
Complete Assembled Stations Pilot Lights Push button stations with pilot lights can operate on either 120V or 240V by changing connections. A red pilot lens is supplied. Selector Switches All two-position Bulletin 800S standard duty selector switch stations can be changed to three-position in the field, and the three-position selector switches can be changed to two-position. Instructions for changing are included with each station. In addition to the standard marking, all selector switches are supplied with adhesive-backed metal legend plates, marked as follows: OFF-ON, FOR-REV, HAND-AUTO, OPEN-CLOSE, HIGH-LOW, SUMMER-WINTER, SUMMER-OFF-WINTER, HIGH-OFF-LOW, OPEN-OFF-CLOSE, FOR-OFF-REV, HAND-OFF-AUTO.
Flush Mount Units fit a standard GEM or Handy Type Wall Box. Contact Symbol 3 Cat. No. 800S-2AS
Type 1 Flush Mount Unit ➊ — Wall Box not included Description and Legend Marking START-STOP
Contact Symbol 3
Gray Painted Flush Plate Cat. No. 800S-2AS
Stainless Steel Flush Plate Cat. No. 800S-2ASQ
➊ Not rated for DC operation.
1
Cat. No. 800S-2SAP
Cat. No. 800S-2SCM
Momentary Contact Buttons and Pilot Light — 120V or 240V, Type 1 Description and Contact Cat. No. Legend Marking Symbol START-STOP
6
800S-2SAP
Cat. No. 800S-R3SX
Selector Switches — Type 1 Description and Contact Legend Marking Symbol OFF-ON — 2-position HAND-OFF-AUTO — 3-position
8 9
Maintained Contact Buttons — Type 1 Description and Contact Legend Marking Symbol 7
ON-OFF START-STOP
7
Cat. No. 800S-2SCM 800S-2SBM
Cat. No. 800S-R2SXP
Cat. No. 800S-R2SX 800S-R3SX
Selector Switch and Pilot Light — 120V or 240V, Type 1 Description and Contact Cat. No. Legend Marking Symbol OFF-ON — 2-position HAND-OFF-AUTO — 3-position
10 11
800S-R2SXP 800S-R3SXP
10-325
Bulletin 800S
Standard Duty Stations Type 1 or 4 Complete Assembled Stations, Continued
Cat. No. 800S-2SA
Description and Legend Marking
Cat. No. 800S-2SA4
Contact Symbol
Type 1 Cat. No.
Cat. No.
STOP — N.C. Contact STOP — N.O. Contact START
1 2 2
800S-1SA 800S-1SAK 800S-1SB
800S-1SA4 800S-1SAK4 800S-1SB4
START-STOP — N.O. - N.C. Contact START-STOP — N.O. - N.O. Contact FOR-REV OPEN-CLOSE ON-OFF — N.O. - N.C. Contact ON-OFF — N.O. - N.O. Contact RAISE-LOWER UP-DOWN
3 4 4 4 3 4 4 4
800S-2SA 800S-2SAK 800S-2SB 800S-2SF 800S-2SE 800S-2SEK 800S-2SD 800S-2SC
800S-2SA4 800S-2SAK4 800S-2SB4 800S-2SF4 800S-2SE4 800S-2SEK4 800S-2SD4 800S-2SC4
FAST-SLOW-STOP FOR-REV-STOP OPEN-CLOSE-STOP RAISE-LOWER-STOP UP-DOWN-STOP
5 5 5 5 5
800S-3SF 800S-3SA 800S-3SD 800S-3SB 800S-3SC
—
Momentary Contact Buttons
0
Type 4 Die Cast Aluminum Enclosure ➊➋
➊ Not rated for DC operation. ➋ Flip levers permit attachment of lock without additional accessory.
Contact Ratings — (IEC 337-1) (NEMA ICS 2-125) Maximum Continuous Current Ith 5 A. Bulletin 800S push button stations have control circuit ratings as follows: Utilization Category
Maximum Operational Voltage Ue
IEC
AC 600 DC 600
Rated Operational Current
NEMA
Volts Ue
Make
Break
AC-11
B600
480…600 240…480 120…240
3600V A 3600V A 30 A
360V A 360V A 3.0 A
DC-11
P600
28…600 24…28 ➌
138V A 5.0 A
➌ For applications below 24V and 24 mA, Bulletin 800T units with Logic Reed, sealed switch, or stackable sealed switch contact blocks are recommended.
10-326
Bulletin 800S
Standard Duty Stations Type 1 or 4 Accessories Complete Assembled Stations Description
Pilot Light Lens Red lens replacement cap.
Cat. No.
800S-N90R
Pilot Light Lens Cat. No. 800S-N90R
Lamp 120V Lamp
800S-N60
Locking Attachments This device is used with extended push buttons or 2-position selector switches.
800S-N1
Lamp Cat. No. 800S-N60
1 This device is used with 3-position selector switches, to lock in the right or left position.
800S-N4
Locking Attachments Cat. No. 800S-N1
10-327
Bulletin 800S
Standard Duty Stations Type 1 or 4 Approximate Dimensions and Shipping Weights Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes. Type 1 — General Purpose Enclosures Knockouts for 1/2 (12.7) & 3/4 (19.1) Conduits (Top & Bottom)
7/ (5.6) Dia. 32 Mtg. Holes (2)
Knockouts for 1/2 (12.7) & 3/4 (19.1) Conduits (Top & Bottom) 1 1/32 (26.2) 7/ (5.6) Dia. 32 Mtg. Holes (2) 4 1/16 2 (103.2) (50.8) 1 1/32
REV
Padlocking Adjustment 1 1/8 (28.6)
(22.2) 1/ 8
2 7/32 (56.4)
(3.2)
2 5/16 (58.7)
For Stop Button Only
Knockouts for 1/2 (12.7) & 3/4 (19.1) Conduits (Top & Bottom) 7/ 7/ 8 16 (22.2) (11.1) 5/ 8 (15.9) OFF HAND AUTO
3 9/32 (83.3)
Padlocking Adjustment
Insulation
1 1/8 (28.6)
1 1/2 (38.1)
Two-Unit Flush Mounting Station Shipping Wt. 1 lb (0.45 kg)
2 5/16 (58.7)
3/ 8
(9.5)
7/ 2(56.4) 32 (22.2)
Selector Switch Surface Mounting Station Shipping Wt. 1 lb (0.45 kg)
Type 4 — Watertight Enclosure 2 15/16 (74.6)
3 7/16 (87.3) 1/ 2 (12.7)
START
5 1/4 (133.4)
6 1/8 (155.6)
STOP
3/ (19.1) Pipe Tap 4
CL 3/ 4 (19.1)
2 1/8 (54) 19/ (7.5) Dia. Mtg. Holes (4) 64
Shipping Wt. 3 lbs (1.36 kg)
10-328
4 1/16 (103.2)
5/ 8 (15.9)
1/ 2 (12.7)
4 5/8 (117.5)
2 13/16 (71.4)
CL of Conduit
1 7/8 (47.6)
STOP
2 7/32 (22.2) (56.4)
7/ 8 (22.2)
Three-Unit Surface Mounting Station Shipping Wt. 2 lbs (0.91 kg)
7/ (5.6) Dia. 32 Mtg. Holes (2)
START
5/8 (15.9) 1/ (3.2) for 8 Stop Button Only
One- and Two-Unit Surface Mounting Stations Shipping Wt. 1 lb (0.45 kg)
2 3/4 (69.9)
CL
(12.7)
1 1/8 (28.6)
0
4 1/8 (26.2) (104.8 5 3/8 (136.5)
STOP
7/ 8
2 5/16 (58.7)
7/ 8 (22.2)
1/ 2
(26.2)
Padlocking Adjustment
1/ 2 (12.7)
FOR
CL
STOP
1/ 2 (12.7)
7/ 8 (22.2)
of Conduit
START
5/8 (15.9)
7/ 8 (22.2)
