ANSI/AWWA C200-17 (Revision of ANSI/AWWA C200-12)
®
AWWA Standard
Steel Water Pipe, 6 In. (150 mm) and Larger
Effective date: August 1, 2017. First edition approved by AWWA Board of Directors June 26, 1975. This edition approved Jan. 14, 2017 Approved by American National Standards Institute Feb. 23, 2017.
SM
Copyright © 2017 American Water Works Association. All Rights Reserved.
Committee Personnel The Steel Water Pipe Manufacturer’s Technical Advisory Committee (SWPMTAC) Task Group on AWWA C200, which reviewed and revised this standard, had the following personnel at the time: Brent Keil, Chair John Luka, Vice-Chair S.A. Arnaout, Forterra Pressure Pipe Inc., Grand Prairie, Texas H.H. Bardakjian, Manufacturing Consultant, Glendale, Calif. R.J. Card, Manufacturing Consultant, Sugar Hill, Ga. K. Couture, American SpiralWeld Pipe Company, Columbia, S.C. G.A. Davidenko, Northwest Pipe Company, Saginaw, Texas D. Dechant, Consultant, Aurora, Colo. V. DeGrande, Ameron International, Rancho Cucamonga, Calif. B.D. Keil, Northwest Pipe Company, Draper, Utah J.L. Luka, American SpiralWeld Pipe Company, Columbia, S.C. R.D. Mielke, Northwest Pipe Company, Raleigh, N.C. J. Olmos, Ameron International, Rancho Cucamonga, Calif. R.N. Satyarthi, Baker Coupling Company Inc., Los Angeles, Calif. C. Shelley, Victaulic, Atlanta, Ga. B.P. Simpson, American SpiralWeld Pipe Company, Columbia, S.C. N. Williams, National Welding Corporation, Midvale, Utah
(AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA)
The AWWA Standards Committee on Steel Pipe, which reviewed and approved this standard, had the following personnel at the time of approval: John H. Bambei Jr., Chair Dennis Dechant, Vice-Chair John L. Luka, Secretary General Interest Members J.H. Bambei Jr., Bambei Engineering Services, Arvada, Colo. W.R. Brunzell, Brunzell Associates Ltd., Skokie, Ill. R.J. Card, Lockwood Andrews & Newnam, Sugar Hill, Ga. R.L. Coffey, HDR Engineering Inc., Omaha, Neb. iii Copyright © 2017 American Water Works Association. All Rights Reserved.
(AWWA) (AWWA) (AWWA) (AWWA)
S.N. Foellmi, Black & Veatch Corporation, Irvine, Calif. R.L Gibson, Freese and Nichols Inc., Fort Worth, Texas M.D. Gossett,* HDR, Denver, Colo. M.B. Horsley,* Horsley Engineering LLC, Overland Park, Kan. R. Issa,* AECOM, McKinney, Texas R.A. Kufaas, Norske Corrosion & Inspection Services Ltd., Surrey, B.C., Canada J.L. Mattson, Corrosion Control Technologies, Sandy, Utah R. Ortega,* Consultant, Spring, Texas E.S. Ralph,† Standards Engineer Liaison, AWWA, Denver, Colo. A.E. Romer, AECOM, Orange, Calif. J.R. Snow, MWH Americas Inc., Denver, Colo. W.R. Whidden, Woolpert, Winter Park, Fla.
(AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA)
Producer Members D.W. Angell,† Standards Council Liaison, American Flow Control, Birmingham, Ala. S.A. Arnaout, Forterra Pressure Pipe, Grand Prairie, Texas H.H. Bardakjian, Consultant, Glendale, Calif. D. Dechant, Dechant Infrastructure Service, Aurora, Colo. V. DeGrande,* Ameron International, Rancho Cucamonga, Calif. W.B. Geyer, Steel Plate Fabricators Association, Lake Zurich, Ill. B.D. Keil, Northwest Pipe Company, Draper, Utah J.L. Luka, American SpiralWeld Pipe Company, Columbia, S.C. R. Mielke,* Northwest Pipe Company, Raleigh, N.C. J. Olmos, Ameron International, Rancho Cucamonga, Calif. G.F. Ruchti,* Consultant, Punta Gorda, Fla. B.P. Simpson,* American Cast Iron Pipe Company, Birmingham, Ala. C.C. Sundberg, Victaulic, Issaquah, Wash. D. Walker, Avid Protective Products LTD/Tnemec Company, Oakville, Ont., Canada J.A. Wise, Canus International Sales Inc., Surrey, B.C., Canada
* Alternate † Liaison, non-voting iv Copyright © 2017 American Water Works Association. All Rights Reserved.
(AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (SPFA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA)
User Members L. Adams, US Bureau of Reclamation, Denver, Colo. G.A. Andersen, New York City Bureau of Water Supply, Little Neck, N.Y. B. Cheng, Metro Vancouver, Vancouver, B.C., Canada M.E. Conner, San Diego County Water Authority, San Diego, Calif. S. Hattan, Tarrant Regional Water District, Fort Worth, Texas T.J. Jordan,* Metropolitan Water District of Southern California, La Verne, Calif. P.K. Karna, Tacoma Water, Tacoma, Wash. M. McReynolds,* Metropolitan Water District of Southern California, Oak Park, Calif. K.R. Parbhoo, Los Angeles Department of Water and Power, Los Angeles, Calif. M. Turney,* Denver Water, Denver, Colo.
* Alternate v Copyright © 2017 American Water Works Association. All Rights Reserved.
(AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA) (AWWA)
Contents All AWWA standards follow the general format indicated subsequently. Some variations from this format may be found in a particular standard. SEC.
PAGE
SEC.
PAGE
Foreword I Introduction...................................... ix
4.4 Calculations....................................... 8 4.5
Selection of Materials......................... 8
I.A Background....................................... ix
4.6
Requirements for Welding Qualification.............................. 11
I.C Acceptance......................................... x
4.7
Fabrication of Pipe........................... 11
Special Issues..................................... xi
4.8
Production Weld Tests..................... 15
II.A Advisory Information on Product Application.................................. xi
4.9
Permissible Variations in Dimensions................................ 19
II.B Chlorine and Chloramine Degradation of Elastomers......... xii
4.10 Ancillary Pipe................................... 19
III
Use of This Standard....................... xiii
4.12 Protective Coatings and Linings....... 24
III.A Purchaser Options and Alternatives............................... xiii
4.13 Special Sections................................ 25
I.B History.............................................. ix II
4.11 Preparation of Ends.......................... 20
4.14 Fabrication of Special Sections......... 25
III.B Modification to Standard................ xiv IV
5 Verification
Major Revisions............................... xiv
5.1 Inspection........................................ 25
V Comments...................................... xiv
5.2
Test Procedures................................ 26
Standard
5.3
Calibration of Equipment................. 28
1 General
5.4
Test Reports..................................... 29
1.1 Scope................................................. 1
6 Delivery
1.2 Purpose.............................................. 1
6.1 Marking........................................... 29
1.3 Application......................................... 1
6.2 Handling and Loading..................... 29
2 References......................................... 2
6.3
3 Definitions........................................ 4
Figures 1 Charpy Test Evaluation.................... 10
4 Requirements 4.1 Permeation......................................... 7 4.2 Materials............................................ 8 4.3 Drawings............................................ 8
Affidavit of Compliance................... 29
2
Repair Method by Offset Value and Wall Thickness........................... 12
3
Bridge Cam Gauge........................... 13
vii Copyright © 2017 American Water Works Association. All Rights Reserved.
SEC.
PAGE
SEC.
PAGE
4
Reduced-Section Tension Test Specimen.................................... 15
5
Guided-Bend Test Specimen............ 16
Tables Steel Plate, Sheet, or Coils for 1 Fabricated Pipe............................. 9
6
Jig for Guided-Bend Test.................. 16
2
7
Alternative Guided-Bend Wraparound Jig.......................... 17
Repair Requirements Based On Offset Value and Wall Thickness................................... 13
8
Alternative Guided-Bend Roller Jig.............................................. 18
3
Guided-Bend Test Jig Dimensions................................ 17
viii Copyright © 2017 American Water Works Association. All Rights Reserved.
