T PL IA N OM
Features
Applications
n Bifilar or sector windings
n For the suppression of EMI in data and
*R oH S
C
n Wide frequency range over 1000 MHz
signal lines, e.g. CANbus
n Rated current 0.2 to 0.5 A n Open construction is more economical
than DR332 Series 9.00 ± 0.3 (.354 ± .012) n RoHS compliant* LE AD
F RE E
7.30 TYP. (.287) 9.00 ± 0.3 (.354 ± .012) 7.30 TYP. (.287)
4 1 DR331 Series Surface Mount Data Line Chokes 5.40 ± 0.3
Electrical Specifications @ 25 °C Ro VE LEA HS RS D C ION FRE OM S E PL AR IA E NT *
Bourns Part No.
®
DR331-113BE DR331-253AE DR331-513BE DR331-513BE DR331-104AE DR331-474BE DR331-105BE DR331-225BE DR331-475BE
2
LL (1-4) @ 100 kHz, 0.1 Vrms 0.30 (Typ.) (.012) (2-3 Short)
L (1-4) @ 100 kHz, 0.1 Vrms (µH)
(.213 ± .012) 3 4 5.40 ± 0.3 (.213 ± .012) 3
2 1
11.0 ± 25 % 25.0 ± 25 % 51.0 ± 25 % 51.0 ± 25 % 100.0 ± 25 % 470.0 ± 25 % 1000.0 ± 25 % 2200.0 ± 25 % 4700.0 ± 25 %
0.05 µH 1.50 µH 2.00 µH 0.60 µH 0.85 µH 0.28 µH 0.29 µH 0.30 µH 0.30 µH
RDC (W) (Winding) Max. 0.12 0.20 0.30 2 0.30 0.10 20.28 1 0.40 0.70 1 0.70
0.30 (.012) 0.50 (.020) TYP. 0.50 (.020) TYP.
9.00 ± 0.3 (.354 ± .012) 7.30 TYP. (.287)
1 2
1
4
2
3
1.20 REF. (.047)
5.40 ± 0.3 (.213 ± .012)
4.70 ± 0.3 (.185 ± .012)
0.30 (.012) 5.50 TYP. (.217)
3
3 4
4
(.100)
1.75 TYP. (.069)
Schematic 1 1 0.50 (.020)2 TYP.
3
4
TYP.
2
1
2.54 TYP. (.100)
113B 113B = DR331-113B 0518 Core...............................................Ferrite 113B Wire..... Enameled copper wire (Class F) 0518 DATE CODE: WEEK Base........................Phenolic (UL 94V-0) Materials
DATE CODE: YEAR Terminal.....................................Cu/Ni/Sn Adhesive............................... Epoxy resin DATE CODE: WEEK Packaging...... 1500 pcs. per 13 inch reel DATE CODE: YEAR
3.70 (.146) REF. 5.40 ± 0.3 3.70 (.213 ± .012) (.146) 3 REF.
How to Order
DR331 - 253 A E
4
2.20 (.087)
REF.
Bifilar 1.75 TYP. Sector (.069) Sector 1.75 Bifilar TYP. (.069) Sector Bifilar Bifilar 2.54 TYP. (.100) Bifilar Bifilar 2.54
9.60 MM 4.70 ± 0.3 DIMENSIONS: (.378) (.185 ± .012) (INCHES) REF. N2 4
5.50 TYP. (.217) N2
3
Model Value Code See Model-Value Table Winding Type A = Sector B = Bifilar Terminal E = Cu/Ni/Sn (RoHS compliant)
1.75 TYP. (.069) 4 3
N1 = POLARITY 113B = DR331-113B3
2
1
Winding 4.70 ± 0.3 (.185 ± .012)
9.60 (.378) REF.
0.30 (.012)
2
0.5 A 5.50 TYP. (.217) 0.5 A 0.5 A 5.50 TYP. (.217) 0.5 A 0.5 A 0.5 A 0.5 A 0.3 A 0.2 A
9.00 ± 0.3 (.354 ± .012) Recommended Layout 7.30 TYP. (.287) 2.20 1.20 REF. REF. (.087) (.047)
Product Dimensions
0.50 (.020) TYP.
4.70 ± 0.3 (.185 ± .012)
Rated Current Max.
Rated Voltage...................80 Vdc/42 Vac Hipot (1 sec.)......... 250 Vac/60 Hz, 3 mA Operating Temperature .................................-40 °C to +135 °C Storage Temperature .................................-55 °C to +135 °C Temperature Rise ..................30 °C max. at rated current Resistance to Solder Heat .................................. +260 °C, 10 sec. 113B = DR331-113B Moisture Sensitivity Level......................1 ESD Classification (HBM)................. N/A
N1
113B= POLARITY 0518
4
2.54 TYP. (.100)
Typical Part Marking 113B = DR331-113B
113B 0518 DATE CODE: WEEK DATE CODE: YEAR
DATE CODE: WEEK DATE CODE: YEAR 1.20 REF. (.047) 1.20 REF. (.047)
REF.
2.20 (.087)
REF.
2.20 (.087)
3.70 (.146) +886-2 REF. 2562-4117
Asia-Pacific: Tel: • Email:
[email protected] EMEA: Tel: +36 88 520 390 • Email:
[email protected] The Americas: Tel: +1-951 781-5500 • Email:
[email protected] 9.60 www.bourns.com (.378)
3.70 (.146) REF.
REF.
9.60 (.378) REF.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU N2 June 8, 2011. Specifications are subject to change without notice. 1 4 Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. N2 1
4
2
3
DR331 Series Surface Mount Data Line Chokes Solder Profile 300 <1> Max. of 70 seconds > 200 °C <2> Max. of 50 seconds > 230 °C <3> Max. of 10 seconds > 255 °C
250
<3> 100000 260 °C
255 °C
245 °C
Temperature (°C)
230 °C
-475BE
<2> 10000
200 Impedance ( )
150 120 - 150 seconds
1000 -474BE -513AE
100
Ramp-down -253AE -104AE5 °C/second maximum
100
50
-105BE
-225BE <1>
-113BE
Ramp-up 4 °/second maximum
10
0
0
50
100
0.1
150
200
1
250
Time (Seconds)
10
300
100
1000
Frequency (MHz)
10000
Impedance vs. Frequency
Insertion Loss vs. Frequency
100000
-105BE
-225BE 1000 -474BE -513AE -253AE
100
-104AE
-513BE
1000 -10
Insertion Loss (dB)
-475BE
10000
Impedance ( )
Impedance ( )
0 -5
-15
-104AE
-20 -25
-253AE
-30 100 -35 0.1
-113BE
-113BE
-474BE
-225BE 1
-513AE
-105BE 10 Frequency (MHz)
-40
100
1000
-475BE
-45
10 0.1
1
10
100
0.1
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz) 10000
0 -5
Insertion Loss (dB)
-5
-513BE
1000 -10
Insertion Loss (dB)
Impedance ( )
0
-15
-104AE
-20
-113BE
-25
-253AE -474BE
-225BE
-30
100 -350.1 -40
-475BE
100
-15 -20 -25 -30
-513AE
-105BE 10
1
-513BE
-10
-35 0.1
1000
1
10
100
Frequency (MHz)
Frequency (MHz)
-45 0.1
1
10
100
1000
Specifications are subject to change without notice. Users should verify actual device performanceFrequency (MHz) in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. 0
1000
DR331 Series Surface Mount Data Line Chokes Packaging Specifications 330.0 DIA. (13.00)
2.0 ± 0.5 (.079 ± .020)
22.4 (.882) 13.0 (.512) DIA.
21.0 ± 0.8 (.827 ± .031)
COVER TAPE 50.0 (1.969)
13.0 DIA. (.512)
18.0 (.709)
EMBOSSED CARRIER
MM DIMENSIONS: (INCHES)
1.75 (.069) END
DIA.
1.55 (.061)
8 (.315)
16.0 (.630)
4 (.157)
16.0 (.630)
253A 512
160 (6.300)
253A 512
253A 512
253A 512
253A 512
NO COMPONENT
START
NO COMPONENT COMPONENTS
390 (15.354)
USER DIRECTION OF FEED
1500 PCS. PER REEL
REV. 10/17 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information before placing orders and should verify that such information is current and complete. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to a combination of the Bourns® product with other components in the user’s application or due to the environment of the user application itself. Such characteristics and parameters also can and do vary in different applications and actual performance may vary over time. Users should always verify actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments about how much additional test margin to design in to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet requirements of such industry standard or such particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns® standard products that are designed and tested for use in automotive applications will be described on the applicable data sheets as compliant with the applicable AEC-Q standard. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application is not recommended, authorized or intended and will be at the user’s sole risk. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns® standard products that are designed and tested for use in aircraft or space applications will be described on the applicable data sheets as compliant with the RTCA DO-160 standard. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application is not recommended, authorized or intended and will be at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the provisions above applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products, technology or technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes, and Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability arising out of the application or use of any Bourns® standard product, (ii) any and all liability, including, without limitation, special, punitive, consequential or incidental damages, and (iii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 10/18/17
