FULLER offers a comprehensive power tool accessory program from its twist drill bits to wire brushes to saber saw blades. For normal duty tasks, a complete range of FULLER brand accessories are offered. For heavy duty applications, the FULLER PRO line of accessories is available.
POWER TOOL ACCESSORIES
Back
POWER TOOL ACCESSORIES
FULLER PRO-POINT TITANIUM DRILL BITS
Large flute chambers prevent clogging
The titanium nitride coating on these PRO-POINT drill bits offers improved wear resistance which results in a easier drilling & longer life of the drill bit.
Titanium nitride coating lasts up to six times longer than normal HSS drill bits
PRO-POINT TITANIUM DRILL BITS Product No.
Size
Box/Carton Carded
800-4050 1/16” 800-4051 5/64” 800-4052 3/32” 800-4053 7/64” 800-4054 1/8” 800-4055 9/64” 800-4056 5/32” 800-4057 11/64” 800-4058 3/16” 800-4059 13/64” 800-4060 7/32” 800-4061 15/64” 800-4062 1/4” 800-4064 9/32” 800-4066 5/16” 800-4068 11/32” 800-4070 3/8” 800-4072 13/32” 800-4074 7/16” 800-4076 15/32” 800-4078 1/2”
5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30
TITANIUM DRILL BIT SETS Product No.
Description
Contents
Box/ Carton
801-4113 6/24 13 Piece titanium 1/16”-1/4” by 64ths drill bit set 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”
801-4121 6/12 21 Piece titanium 1/16”-3/8” by 64ths drill bit set 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4” 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”
64
135° split point drill tip for fast and efficient penetration of work surface
Side taper ensure accurate and smooth holes
POWER TOOL ACCESSORIES
FULLER PRO-POINT COBALT DRILL BITS
Side taper ensure accurate and smooth holes
The cobalt composition makes this drill bit suited for drilling into hard abrasive surfaces such as stainless steel and other applications where high drilling heats occur.
Large flute chambers prevent clogging 135° split point drill tip for fast and efficient penetration of work surface
PRO-POINT COBALT DRILL BITS Product No.
Size
800-5050 1/16” 800-5051 5/64” 800-5052 3/32” 800-5053 7/64” 800-5054 1/8” 800-5055 9/64” 800-5056 5/32” 800-5057 11/64” 800-5058 3/16” 800-5059 13/64” 800-5060 7/32” 800-5061 15/64” 800-5062 1/4” 800-5063 17/64” 800-5064 9/32” 800-5065 19/64” 800-5066 5/16” 800-5067 21/64” 800-5068 11/32” 800-5069 23/64” 800-5070 3/8” 800-5071 25/64” 800-5072 13/32” 800-5073 27/64” 800-5074 7/16” 800-5075 29/64” 800-5076 15/32” 800-5077 31/64” 800-5078 1/2”
Cobalt composition designed to withstand high drilling heats
Box/Carton Carded
Cobalt composition of drill bit makes it suited for drilling into hard abrasive surfaces such as stainless steel and other applications where high drilling heats occur.
5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30
65
POWER TOOL ACCESSORIES
FULLER HIGH SPEED STEEL TWIST DRILL BITS FULLER high speed steel drill bits are designed for drilling into steel, wood and plastics. Their precision ground 118° drill tips are excellent for general purpose use. FULLER HSS drill bits are available in regular length and reduced shank formats.
HIGH SPEED STEEL TWIST DRILL BITS Product No.
Size
800-2904 1/16” 800-2905 5/64” 800-2906 3/32” 800-2907 7/64” 800-2908 1/8” 800-2909 9/64” 800-2910 5/32” 800-2911 11/64” 800-2912 3/16” 800-2913 13/64” 800-2914 7/32” 800-2915 15/64” 800-2916 1/4” 800-2917 17/64” 800-2918 9/32” 800-2919 19/64” 800-2920 5/16” 800-2921 21/64” 800-2922 11/32” 800-2923 23/64” 800-2924 3/8” 800-2978 1/8” Stubby
No. per Card
Box/Carton Carded
2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2
10/60 10/60 10/60 10/60 10/60 10/60 10/60 10/60 10/60 10/60 10/60 10/60 10/60 10/60 10/60 5/30 5/30 5/30 5/30 5/30 5/30 10/60
3/8” TURNED DOWN SHANK Product No.
Size
800-3125 25/64” 800-3126 13/32” 800-3127 27/64” 800-3128 7/16” 800-3129 29/64” 800-3130 15/32” 800-3131 31/64” 800-3132 1/2”
66
No. per Card
Box/Carton Carded
1 1 1 1 1 1 1 1
5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30
POWER TOOL ACCESSORIES
HSS DRILLS SETS AND INDEX BOXES Product No.
Contents
Description
Box/ Carton
801-3613 6/24 13 Piece HSS 1/16”-1/4” by 64ths drill set 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4” 801-3621 6/12 1/16” - 3/8” by 64ths 21 Piece HSS 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, drill set 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”
801-3613
801-3621
FULLER PRO MASONRY DRILL bits
Special grade carbide for better wear resistance
FULLER offers a wide range of masonry drill bits in regular and extra long length, and are suitable for rotary and hammer drills. FULLER masonry drill bits are designed for use in dry concrete, brick and tile. FULLER PRO masonry drill bits are specifically designed for heavy duty use.
Wide spiral flutes will not clog during use
120° tip for faster penetration
Ground from solid to withstand heavy duty application
High temperature brazing for long life performance
MASONRY DRILL bits Product No.
Size
805-3010 1/8” 805-3012 3/16” 805-3014 1/4” 805-3016 5/16” 805-3018 3/8” 805-3020 1/2” 805-3022 5/8” 805-3031 5/32” 805-3032 3/16”
Shank
Overall Length
Box/Carton Pouched
1/8” 3/16” 1/4” 1/4” 3/8” 3/8” 3/8” 3/8” 3/8”
2-1/2” 3-1/3” 6” 6” 6” 6” 6” 5-1/2” 5-1/2”
10/60 10/60 10/60 10/60 10/60 5/30 5/30 10/60 10/60
67
POWER TOOL ACCESSORIES
MASONRY DRILL bits Product No.
Size
805-0018 1/8” 805-0020 3/16” 805-0021 1/4” 805-0022 5/16” 805-0023 3/8” 805-0024 1/2” 805-0025 5/8” 805-0026 3/4”
Shank
Overall Length
Box/Carton Carded
1/8” 3/16” 1/4” 1/4” 1/4” 3/8” 3/8” 3/8”
2-7/8” 3-3/4” 4” 4” 4” 6” 6” 6-1/8””
10/60 10/60 10/60 10/60 10/60 5/30 5/30 5/30
Fast spiral flutes clear dust and chips quickly. Tungsten carbide tips for fast penetration. Heat-treated steel for long life performance.
MASONRY DRILL BIT SETS Product No.
Contents
Description
Box/Carton Carded
806-0027 5/30 5 Piece masonry 1/8”, 3/16”, 1/4”, drill bit set 5/16”, 3/8” long MASONRY DRILL bits Product No.
Size
805-1911 5/16” 805-1912 3/8” 805-1913 1/2” 805-1914 9/16” 805-1915 5/8” 805-1916 3/4” 805-1917 7/8” 805-1918 1”
Shank
Overall Length
Box/Carton Pouched
1/4” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8”
15-3/4” 15-3/4” 15-3/4” 15-3/4” 15-3/4” 15-3/4” 15-3/4” 15-3/4”
5/25 5/25 5/25 5/25 5/25 5/25 5/25 5/25
Fuller Glass and Tile Drill Bits
FULLER PRO long masonry drill bits feature an extra heavy carbide tip making them suitable for hammer drilling. All long drill bits are individually pouched.
Spear point produces perfectly round holes in glass or tile without chipping or breaking
Edges diamond-wheel sharpened for improved performance
Glass and Tile DRILL bits Product No.
Size
807-1005 1/8” 807-1007 3/16” 807-1009 1/4” 807-1011 5/16” 807-1013 3/8” 807-1015 1/2”
68
Shank
Overall Length
Box/Carton Carded
1/8” 1/8” 3/16” 3/16” 1-4” 5/16”
2-3/16” 2-1/2” 2-3/4” 3-1/8” 3-1/4” 3-1/2”
5/30 5/30 5/30 5/30 5/30 5/30
Special carbide tip for long life performance
Zinc plated for wear-resistant appearance
POWER TOOL ACCESSORIES
FULLER SPADE WOOD BITS
Hex shank prevents slipping
Extra sharp spur points ensure fast and accurate penetration of surface
Large easy-to-read size identification
Single edge chip breaker for quick clearance of fragments
Precision-ground cutting edges for clean and efficient cutting action
SPADE WOOD DRILL BITS Product No.
Size
Overall Length
810-8504 1/4” 6-1/8” 810-8505 5/16” 6-1/8” 810-8506 3/8” 6-1/8” 810-8507 7/16” 6-1/8” 810-8508 1/2” 6-1/8” 810-8509 9/16” 6-1/8” 810-8510 5/8” 6-1/8” 810-8511 11/16” 6-1/8” 810-8512 3/4” 6-1/8” 810-8513 13/16” 6-1/2” 810-8514 7/8” 6-1/2” 810-8515 15/16” 6-1/2” 810-8516 1” 6-1/2” 810-8518 1-1/8” 6-1/2” 810-8520 1-1/4” 6-1/2” 810-8522 1-3/8” 6-1/2” 810-8524 1-1/2” 6-1/2” 810-8530 Extension 12”
Box/Carton Carded
5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30 5/30
69
POWER TOOL ACCESSORIES
FULLER INSERT BITS Made of long lasting tool steel, to withstand the rigors of professional use. FULLER offers a complete range of insert bits in a carded and comprehensive bulk program. A full selection of lengths from 1” to 3”, in all popular types are available – traditional slots and Phillips tips to magnetic nut setters are included in the program. Special merchandisers offer a space-efficient means of displaying the entire line of FULLER Insert Bits.
INSERT BITS Product No.
815-3701B 815-3702B 815-3703B 815-3705B 815-3710B 815-3715B 815-3720B 815-3725B 815-3740B 815-3741B 815-3742B 815-3743B 815-3751B 815-3752B 815-3753B 815-3761B 815-3762B 815-3763B 815-3771B 815-3772B 815-3773B 815-3780B 815-3781B 815-3782B 815-3785B 815-3786B 815-3787B 815-3790B 815-3792B 815-3795B 815-3796B
Bit Type
#1 #2 #3 #2 Dry wall T10 T15 T20 T25 #0 #1 #2 #3 #1 #2 #3 #1 #2 #3 #1 #2 #3 #6-8 Slot with Finder #8-10 Slot with Finder #10-12 Slot with Finder 1/4” Nut Setter 5/16” Nut Setter 3/8” Nut Setter Socket Adapter Magnetic Holder #1 Posidrive Insert Bit #2 Posidrive Insert Bit
Overall Length
Box/Carton Bulk
1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 2” 2” 2” 2” 2” 2” 3” 3” 3” 2” 2” 2” 1-3/4” 1-3/4” 1-3/4” 2” 3” 1” 1”
25/250 25/250 25/250 25/250 5/50 5/50 5/50 5/50 25/250 25/250 25/250 25/250 25/250 25/250 25/250 25/250 25/250 25/250 25/250 10/100 10/100 5/50 5/50 5/50 5/50 5/50 5/50 10/100 10/100 25/250 25/250
815-3702
815-3715
815-3752
815-3781
815-3787
815-3790
815-3792
70
POWER TOOL ACCESSORIES
INSERT BIT SETS Product No.
Description
Contents
Box/ Carton
816-3801 12/48 34 Piece assorted 1/8”, 5/32”, 3/16”, 1/4”, 9/32”, insert bit set #0, (2) #1, (3) #2, (2) #3 #0, (2) #1, (3) #2, (2) #3 T10, T15, T20, T25, T27, T30, T40 9/64”, 5/32”, 13/16”, 1/4” Magnetic insert bit holder Storage case
816-3802* 12/48 34 Piece security 6.0mm, 8.0mm, 10.0mm insert bit set #1, #2, #3 4.0mm, 6.0mm, 8.0mm, 10.0mm T8H, T10H, T15H, T20H, T25H T27H, T30H, T35H, T40H 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm 5/32”, 9/64”, 1/8”, 7/64”, 3/32”, 5/64,” Magnetic insert bit holder Storage case
*
Also available as a C-strip (12 units) use suffix “C” when ordering (Example 816-3802C).
71
POWER TOOL ACCESSORIES
FULLER WIRE BRUSHES
1/4” shank suitable for all electric drills or flexible grinders.
FULLER offers a complete line of wire wheel and cup brushes in attractive display merchandisers. FULLER wire wheel and cup brushes come in both fine steel wire bristles suitable for light cleaning and polishing metals, unfinished tiles and stone; and course steel wire bristles suitable for the removal of old paint, surface rust, corrosion, and burrs from metal.
Wide brushing area provides excellent results on large flat or semi-flat metal surfaces
Precision balanced shank
High strength steel bristles for less wire breakage, and longer life
WIRE BRUSH BUCKET DISPLAYS Product No.
Description
Contents
Box/ Carton
821-3529 1 6 sizes, 6 each 36 Piece wire 1-1/2” to 3” diameters brush assortment
72
FULLER offers attractive, space efficient, display merchandisers of the most popular wire brushes.
POWER TOOL ACCESSORIES
FULLER JIGSAW BLADES FULLER offers a complete line of Jigsaw and Reciprocating Saw Blades from general purpose use to the specialized needs of the professional. FULLER blades come individually carded and in popular size sets.
SABER SAW BLADES Product No.
Description
Length per inch
850-7901 Course wood cutting 850-7902 Medium wood cutting 850-7903 All Purpose sawing 850-7904 Metal cutting to 1/4” 850-7905 Metal cutting to 1/8’ 850-7906 Finish wood cutting 850-7907 Scroll saw cutting 850-7908 Super fine scroll cutting 850-7909 Flush cutting of wood 850-7910 Rough cutting of wood
Teeth per card
Blades
Box/Carton Carded
FULLER standard saber saw blades are made from the highest quality steel. The teeth are precision ground, precision filed and set for the best in cutting performance. Clean and efficient cuts are guaranteed.
3-1/8” 6 2 10/60 3-1/8” 10
2
10/60
2-3/4” 13
2
10/60
2-3/4” 21
2
10/60
2-3/4” 36
2
10/60
3-1/8” 13
2
10/60
3-1/8” 12
2
10/60
2-3/4” 20
2
10/60
850-7901
850-7904 850-7906
850-7907
850-7909
3-1/2” 8 1 10/60 6” 6 1 10/60
SABER SAW BLADES SETS Product No.
Contents
Description
Box/Carton Carded
851-7926 10/60 6 Piece saber saw 1 Each of: 850-7901, blade set 850-7902, 850-7903, 850-7904, 850-7905, 850-7906 850-7906 850-7901 850-7902 850-7903 850-7904 850-7905
73
POWER TOOL ACCESSORIES
FULLER RATCHET BIT BRACE FULLER Ratchet Bit Braces feature a 12 point reversible ratchet, with a 10” sweep. Tough molded head and handle. Jaws designed to hold 1/8” to 7/16” shank bits, as well as tapered shanks. Available in 2-jaw and 4-jaw formats.
RATCHET BIT BRACE Product No.
Description
Length per inch
Box/ Carton
890-1071 6/24 Ratchet bit brace 10” 2 jaw chuck 890-1072 6/24 Heavy duty ratchet 10” bit brace 4 jaw chuck
FULLER DRILL ACCESSORIES FULLER offers a variety of accessories to its Power Tool Accessory Program.
DRILL ACCESSORIES Product No.
Description
892-1001 12” Flextension
1/10
893-7001 11 Piece Flextension set
5/10
892-1001
74
Box/Carton Carded
893-7001
