249 Fuse Holders & Blocks Fuse Holders and Blocks Section Contents Page OPM-1038 3-pole fuse holders with disconnect switch
For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 291 NDNF1-WH Specifications Description: Fuse holding rail mount terminal block
Packaging Packaging Code Prefix Description Blank 10 fuse holders packed into a carton BK 100 fuse holders packed into a cardboard shelf package S Packing
1 PRACTICAL FUSE SPECIFICATION General: The contractor shall install UL “listed” fuses of the correct UL Class, type and amp ratings in switches or place in spare
OptiFuse - Rev A 01/2010 - Page 1/9 Fuse Selection Guide Although care is taken to properly design electrical and electronic circuits; overcurrents
Document Checklist for: Non-UK passport Holders and Referral Cases Non-UK Passport Holders applying for any visa type other than Employment Visa,
All Items with QT, KT, GT or PT Suffix are Clam Shell Program Items. 24 Taps Into GM Fuse Block Splice Accessory Wire Onto 16 Ga Connector Wire Plug Connector Into Cavity
continues. The ability to resist surges is a function of the fuse design and/or classification relative to the surge pulse, duration frequency and so on
Abstract. The recent proliferation of heterogeneous computing devices and wireless network technology presents new opportunities for Computer Supported Cooperative Work (CSCW). One emergent paradigm is that of ubiquitous collaboration, which provides
Title: Edison Fuse Reducers Subject: Fuse reducers install on fuses and permit smaller size fuses to be used in larger amp size switches and blocks
FUSEOLOGY Selection Guide use F Characteristics, Terms and Consideration Factors Table of Contents Page Fuse Characteristics, Terms and Consideration
2 Technical Data 1157 Effective March 2017 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches
General Eaton's Cooper Power™ series ELF™ current-limiting dropout fuse is a full range current-limiting fuse designed for mounting in an industry stan-
H H 00 MODULAR FUSE-LinK BASES FOR CARTRiDGE FUSE-LinKS Ferraz Shawmut CC, MSC and CMS modular fuse bases accommodate industrial cylindrical fuse-links 8 x 31 mm,
HKSAR passport holders have been granted visa-free access or visa-on-arrival to visit the following countries/territories (updated on 26 October 2017):
GECOM Technologies GmbH Calibration -No.: 29h00422 World's Largest Fuse Measurements Report 01-2010 The measurements done, were made under the aspect of the influence
2 Technical Data 720115 Effective February 2015 Bussmann series Cylindrical fuse links EATON www.eaton.com Table 1. Catalogue Symbol: Size (mm) Without
Gm ALL 3: Some Take too, Ebmaj7 love things _ Gm my Fm/Bb with are for meant — to Eb/Bb can't Gm Ab/Bb be. Ab take my whole Cm help Cm Cm hand,
Title: Bussmann series ATM Blade Fuse Data Sheet No. 2048 Subject: Details and technical specifications on the 30V ATM blade fuse in ratings from 2 to 30 amps
nosevima - oznaka SFL ili I i simbol ( DIN 30600 ) PODNOŽJA OSIGURAČA - nazivni napon AC 690 V - veličine 00C, 00, 0, 1, 2 i 3 - norme HRN EN 60269, IEC
Technical Data Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection Summary of Changes This publication contains new and updated information as
25-kV Wall-Mount Fuse-Gear 200 Amp S&C SMU-20 and SM-4 ... ... to
1 APPLICATION FOR ADMISSION FOR 2018 (For more information visit our website: www.univen.ac.za) This is only an application for admission and therefore binding upon
Fuse Holders for Low-Peak CUBEFuse Finger-Safe, 1-100A, 600Vac/dc Features and Product Benefits
Catalog Symbols: TCFH30N (1-30A) TCFH60N (1-60A) TCFH100N (1-100A) Construction: Finger-safe Mounting: DIN Rail or panel mount Ampacities: TCFH30N - holds any 1-30A CUBEFuse TCFH60N - holds any 1-60A CUBEFuse TCFH100N - holds any 1-100A CUBEFuse Voltage Rating: 600Vac/dc Withstand Rating: 300kA RMS Sym. (UL) 200kA RMS Sym. (CSA) 100kA DC (UL & CSA) Agency Information: • UL Listed Fuse Holder: Guide IZLT, File E14853 • CSA Certified Fuse Holder: Class 6225-01, File 47235 • CE compliance for the European Union low voltage directive Operating and Storage Temperature Range: -40 to 80°C Material Specifications: • Holder case: Glass filled PBT • Interface clips: Copper alloy • Interface clip plating: Tin • Terminals: Steel • DIN Rail spring: Stainless steel
• Holder for the world’s first finger-safe power fuse system. • Holder and CUBEFuse together deliver Class CF and Class J fuse performance in a time-delay or fast-acting version. See Data Sheet 9000 for time-delay indicating and non-indicating CUBEFuse performance characteristics. See data sheet 2147 for fast-acting CUBEFuse performance characteristics. • Smallest fuse and holder footprint of any class fuse installation including Class J, CC, T and RK. • DIN Rail or panel mount for easy installation. • Holders dovetail together to easily achieve the required number of poles. • All holders (TCFH30N, TCFH60N and TCFH100N) dovetail together to permit mixing ampacities. • All holders accept equal and lower amp rated TCF_ indicating and TCF_RN non-indicating time-delay CUBEFuse or FCF_RN fast-acting CUBEFuse - no need for a fuse reducer. • Dual wire rated terminals for wiring ease. • High 300kA withstand rating stands up to high fault currents. Conductors/Wire Range - 75ºC Cu Wire Only Holder/ Ampacity TCFH30N TCFH60N TCFH100N
No. of Poles* 1 1 1
Single Wire 18 to 8 AWG 18 to 4 AWG 18 to 1 AWG
* Holders dovetail together to achieve the desired number of poles for the application.
Carton Quantity and Weight Part Number TCFH30N TCFH60N TCFH100N
Carton Qty. 12 12 6
Weight Per Carton lbs kg 2.42 1.10 2.57 1.17 1.38 0.63
Terminal Torque Ratings by Conductor and Holder Size (75°C Cu only) TCFH30N TCFH60N TCFH100N Single Dual Single Dual Single Dual 10-8 AWG 25lb-in 18-10 AWG 25lb-in 18-10 AWG 20lb-in 18-10 AWG 20lb-in 18-10 AWG 25lb-in 6 AWG 45lb-in 18-12 AWG 20lb-in 8-4 AWG 35lb-in 8-6 AWG 35lb-in 8-1 AWG 40lb-in
0710
BU-SB10812
Dual Wire 18 to 10 AWG 18 to 6 AWG 6 AWG
Page 1 of 2
Data Sheet 9007
TCFH Dimensions – in (mm)
A
A
B D
B
C C D TCFH30N & TCFH60N
E
Holder
A 2.30 TCFH30N (58.50) 2.60 TCFH60N (66.12) 2.91 TCFH100N (73.81)
B 0.76 (19.37) 1.03 (26.23) 1.05 (26.74)
C 1.357 (34.24) 1.60 (40.64) 2.01 (50.93)
D 0.15 (3.76) 0.17 (4.34) 0.15 (3.81)
E 0.80 (20.39)
F A
F 2.51 (63.65)
TCFH100N
CUBEFuse Availability and Applications The indicating Low-Peak time-delay CUBEFuse (TCF_) and non-indicating Low-Peak time-delay CUBEfuse (TCF_RN) are available in amp ratings from 1-100A. See Data Sheet 9000. The non-indicating, fast-acting Low-Peak
TCF_100RN
FCF_100RN
CCP_CF 1-, 2- & 3-Pole switched disconnects Data Sheet 1157
CUBEFuse is available in amp ratings from 1-100A. See data sheet 2147. The CUBEFuse is also used in these other Cooper Bussmann circuit protection solutions.
CCPB 1-, 2- & 3-Pole disconnects for the Quik-Spec™ Coordination Panelboard. Data Sheet 1160
CF_ Quik-Spec™ Safety Switch disconnect (optional window). Data Sheet 1156
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.