Ingenico iCT220 - Squarespace

Ingenico iCT220 Initial Setup of the iCT220 • Plug the power cable from the device into the network hub, then plug the network hub into a power outlet...

7 downloads 653 Views 510KB Size
Ingenico iCT220 Initial Setup of the iCT220 •

Plug the power cable from the device into the network hub, then plug

the network hub into a power outlet. •

Plug an Ethernet cord into the network hub where its labeled “ETH”.



Once the device powers on click “F” on the device to bring up the

“Telium Manager”. •

Enter your stock password which should be 1234567 and the “F” key.



Click 0, 2, 4, 1, 1, scroll down to “hardware infos” then click “Ethernet”.

Write down your IP address since we will be using this later for the Smart360/SirclePOS setup.

Page 1 of 3

Setup with SirclePOS/Smart360 •

Open the POS software and click settings, then “Payment Processing”.



Uncheck “Express Checkout” if selected, and open “Other Payment

Processing”. •

In the drop down menu select “velocityemc” and enter your “Merchant

Profile ID” along with your state initials.

Page 2 of 3



Once completed, hit the back button on your tablet until you are back

at the initial settings screen. •

Select “Payment Device Setup”, then select “Ingenico iCT250/iCT220”.



Enter the IP address that you wrote down earlier from your Ingenico

iCT220, and type 6200 for the port number.

Page 3 of 3