Part No.
AJS & MATCHLESS PETROL & OIL TANKS - NEW PARTS
*
Petrol Tanks Tapox Tank Sealant. Designed to withstand 100% ethanol fuel. Pack includes sealant and activator. Not suitable for fibreglass tanks. Sealant remover, removed old tank sealant prior to re-finishing. Not suitable for fibreglass tanks HSS tap set for ⅛"BSP petrol tap holes (all tanks pre-1963 except competition), 2 taps per set 1957-61 tank panels, chromed (pair) Beading for chrome tank panels: red, blue, black Bead, over tank centre seam, 1960-62 road models, chrome on brass Petrol tank mounting kit, 1940-49 models Petrol tank mounting kit, 1950-59 road models Petrol tank fixing bolt with lock-wire tab, 'New Old Stock'
£ 135.00 £ 7.50 £ 27.50 £ 17.25 £ 22.20 £ 4.00
£ 112.50 £ 6.25 £ 22.92 £ 14.38 £ 18.50 £ 3.33
Petrol tank fixing bolt with lock-wire tab, 1941-49
£
2.75
£
2.29
Petrol tank fixing bolt, pre-1960 road twins & pre-1961 road singles
£
3.25
£
2.71
Metal sleeve for petrol tank fixing bolts, pre-1960 road twins & pre-1961 road singles Metal sleeve for petrol tank front fixing bolts, Lightweight models Bolt fixing front of petrol tank, 1950-53 C & CS models Sleeve for tank fixing bolts, 1950-53 C & CS models and 1954-55 CS rear mounting only
£ £ £ £
0.75 0.75 3.25 0.50
£ £ £ £
0.63 0.63 2.71 0.42
Petrol tank front fixing bolt, 1960-only road & CSR twins Nut, lock, for 026633 petrol tank front fixing bolt, original all-metal type Petrol tank front fixing bolt, 1954-60 C & CS Petrol tank mounting, complete (021175, 021174, 021453, 016845) Petrol tank front fixing bolt, 1961-on all models Petrol tank mounting, complete, 1961-on road models (027161, 021174, 021453, 016845,
£ £ £ £ £ £
5.05 2.50 4.60 7.75 4.60 8.65
£ £ £ £ £ £
4.21 2.08 3.83 6.46 3.83 7.21
£
8.80
£
7.33
Petrol tank front fixing nut, 1954-on C & CS and 1961-on road models, nyloc Petrol tank front fixing nut, 1954-on C & CS and 1961-on road models, original all-metal type Petrol tank rubber pad, thick, for fixing bolts in uppermost location. Replaces 16413
£ £
0.80 1.20
£ £
0.67 1.00
£
0.75
£
0.63
Petrol tank rubber pad, thin, for fixing bolts in lowermost location (also suitable instead of 044335 on Lightweights). Replaces 16414 Petrol tank front fixing rubber, 1954-on C & CS and 1961-on road models Petrol tank front fixing washer, all models except 1954-on C & CS and 1961-on road models Petrol tank front fixing washer, 1954-on C & CS and 1961-on road models Petrol tank front fixing inner washer, 1960-on C & CS and 1961-on road models Support for front of tank, 1950-53 C & CS models (pair) Bracket fixing petrol tank, 1958 CSR and for fitting road tanks to 1956-69 C & CS frames. Also suitable replacement for 1959 CSR 025470 bracket Spacer for rear tank fixing, 2 3/32", 1954-57 C & 1956-57 CS Spacer for rear tank fixing, 2 13/16", 1958-on C & 1958-59 CS Spacer for rear tank fixing bolt, 1960-62 CS models Rubber o-ring securing rear of petrol tank, 1961-on, or any competition tank with hooks or buttons for rear mounting Petrol tank rubber support, rear, thin Petrol tank rubber support, rear, original foam rubber block type Petrol tank rubber support, rear, U-shaped, suitable alternative for 027138 Deflector for petrol tank, 1949-52 AJS twins with 4 gallon tank Cord, rubber, for petrol tank deflector, 1949-52 AJS twins with 4 gallon tank Rear tank bolt with spacer & rubbers, Lightweight models Caps 1931-48 petrol cap, 'pie crust' type, chrome
£
0.60
£
0.50
£ £
1.75 0.20
£ £
1.46 0.17
£ 0.20 £ 0.30 £ 16.00 £ 38.00
£ £ £ £
0.17 0.25 13.33 31.67
£ £ £ £
3.50 3.00 0.50 1.20
£ £ £ £
2.92 2.50 0.42 1.00
£ 1.00 £ 3.00 £ 4.25 £ 38.00 £ 1.75 £ 14.30
£ £ £ £ £ £
0.83 2.50 3.54 31.67 1.46 11.92
£
35.00
£
29.17
Washer for 'pie crust' type petrol cap
£
1.00
£
0.83
023358/9 023360/1/2 026606
38-G3-T15A/ NOS 38-G3-T15A (011095) 014997 011002 39-G3-T15 014998 021455 015412 015411 026633 022083 021175 021175C 027161 027161R
Price (20% VAT)
Price (excl VAT)
£
34.75
£
28.96
£
19.50
£
16.25
£
10.00
£
8.33
000177, 014996. NB 014996 rubber fits above head of bolt) 027161C
Petrol tank mounting, complete, 1961-on competition models (027161, 021174, 021453,
016845, 000177, 014995. NB 014995 rubber fits above head of bolt) 016845N 016845 014995 (16413) 014996 (16414) 021174 014999 021453 000177 015413 023065 021173 024073 042423 027137 026359 027138 (027138U) 014827 014850 044244 * 011003 013748 35-G3-T130 AT-30-C
013325 014034 013936 033001
* 017050 41-G3L-T93 017050T 026566 024201 026566T 024201T
Petrol cap, standard bayonet type Cork washer for 013325 petrol cap Competition hinged petrol cap with wing-nut fastening, chrome (split pin not included)
£ 15.00 £ 0.55 £ 27.00
£ 12.50 £ 0.46 £ 22.50
Split pin for competition hinged filler cap, stainless Competition hinged petrol cap with wing-nut fastening, alloy, P11, P11A & 1968 G15CSR (split pin not included) Monza-type hinged petrol cap assembly, 2½", Lyta tanks etc Taps Petrol tap, push on/off hexagonal type, 1/8" x ¼", chrome
£ 0.20 £ 28.50
£ £
0.17 23.75
£
£
29.38
£ 30.00
£ 25.00
Petrol tap, push on/off hexagonal type, ⅛" x ¼", nickel on brass, ethanol-resistant with teflon seal Petrol tap, brass lever type, 1958-on C, CS & CSR type, 1/8" x ¼" (use with 021387 adaptor for competition tanks) Petrol tap, lever type, ethanol resistant, similar to 1958-on C, CS & CSR type, ⅛" x ¼", nickel on brass, without nut & spigot (use with 021387 adaptor for competition tanks)
£
18.50
£
15.42
£ 28.50
£
23.75
£
18.50
£
15.42
Petrol tap, brass lever type, ¼" x ¼", with filter, for use without 021387 adaptor. NB
£ 26.80
£
22.33
35.25
will only fit competition or 1963-on tanks 021843
Petrol tap, brass plunger type, 1/8" x ¼", with filter. Similar to 1955-56 021843 tap but with spigot bottom fitting instead of banjo Petrol tap, brass plunger type, ¼" x ¼". NB will only fit competition or 1963-on tanks
£ 26.80
£
22.33
£
17.25
£
14.38
Petrol tap, push on/off hexagonal type, ¼" x ¼", chrome. NB will only fit competition
£ 28.50
£
23.75
£
18.50
£
15.42
£
10.00
£
8.33
£
10.00
£
8.33
£
48.75
£
40.63
£ £ £ £ £ £
5.50 0.50 6.75 0.85 0.85 4.65
£ £ £ £ £ £
4.58 0.42 5.63 0.71 0.71 3.88
£ £ £ £ £ £ £ £ £ £ £ £
5.50 0.20 0.45 0.20 0.45 4.25 0.85 12.75 1.20 2.85 0.75 1.50
£ £ £ £ £ £ £ £ £ £ £ £
4.58 0.17 0.38 0.17 0.38 3.54 0.71 10.63 1.00 2.38 0.63 1.25
£
0.75
£
0.63
£ 59.00 £ 16.00
£ £
49.17 13.33
£ £ £ £ £ £ £
£ 16.67 £ 10.00 £ 49.17 £ 49.17 £ 13.33 £ 35.00 £ 6.67
or 1963-on tanks 033155
Petrol tap, push on/off hexagonal type, ¼" x ¼", nickel on brass, ethanol-resistant with teflon seal. NB will only fit competition or 1963-on tanks Petrol tap, main, chrome flat lever type, ¼" x ¼", with filter. NB will only fit
competition or 1963-on tanks 031746
Petrol tap, reserve, chrome flat lever type, ¼" x ¼", with filter. NB will only fit
competition or 1963-on tanks. Use this one if only 1 tap fitted. 048529
018153
000513
Petrol tap, main & reserve, chrome push on/off hexagonal type, ¼" x ¼", with reserve lever & filter, without nut & spigot. Standard fitment for 1963-on road models, only one tap required. NB will only fit competition or 1963-on tanks Spanner, petrol taps, 5/8"AF, suits all taps Replacement cork for push on/off hexagonal taps Replacement plunger with cork for pull-on taps Petrol tap nut, ¼" gas thread Petrol tap spigot to suit ¼" nut Right-angle elbow petrol tap spigot with ¼" nut, suits all taps. Allows fuel pipe to run
in same position as taps with banjo fittings, 1955-on road models 021387 000200 000200D 000183 000183D 021844 021195
000908
* 011005/6 021169/70 (011007/8) 010906/7 010908/9 023083/4 023085/6 023282/3 042464/5 042889/90
Adaptor for petrol tap, competition petrol tanks, 1/8" female x ¼" male Fibre washer for 1/8" petrol taps Dowty washer for 1/8" petrol taps Fibre washer ¼" for competition petrol tap adaptor & 1963-on all petrol taps Dowty washer for ¼" petrol taps Petrol pipe 't'-piece Petrol pipe ferrule Petrol pipe ferrule crimping tool Petrol pipe o-clip, stainless Jubilee clip for petrol pipe, stainless Petrol pipe clip Petrol pipe, black ethanol-resistant reinforced rubber, sold per foot - state length required Fuel filter, inline - plastic but small & discreet Knee Grips 1946-1956 AJS knee grip rubbers (pair) 1946-1956 AJS knee grip plates (pair). Also use for 011007/8 (021169/70 plates have 6
mounting holes instead of 4 to re-position plates for 1954-56 3 3/4 gallon tanks) 1946-1956 Matchless knee grip rubbers (pair) 1946-1956 Matchless knee grip plates (pair) 1957-61 AJS knee grip rubbers (pair) 1957-61 Matchless knee grip rubbers (pair) 1957-61 knee grip plates (pair) 1962-only Heavyweight and 1959-65 Lightweight knee grip rubbers (pair) Stick-on knee grip rubbers, 1963-on Heavyweights & 1966-only Lightweights (pair)
20.00 12.00 59.00 59.00 16.00 42.00 8.00
000070 000639 000178 000348 000343 042423
* 022370 027028 027029 011928
018891
Bolt, knee grip plate, pre-1954 & 1960-61 tanks without chrome panels Spacer, knee grip bolt, pre-1954 Spacer, knee grip bolt, 1960-61 tanks without chrome panels Bolt, knee grip plate, 1954-59 3 3/4" gallon tanks (no spacer required) Bolt, knee grip plate, tanks with chrome panels Spacer, knee grip bolt, tanks with chrome panels Badges 1956-60 AJS tank badge rubber seating (pair) 1961-only all AJS Heavyweight, 1961-64 CS models and 1961-on Lightweight plastic blue/silver petrol tank badges, 2¾" diameter (pair) Seating, rubber, for petrol tank badge, 1961-only AJS HW and 1961-on LW (pair) WD & 1947-51 chrome Matchless winged 'M' petrol tank badges (pair). Also suitable alternative to pre-war D5T 500 badges with separate 38-G3-T57 wing emblems 1954-60 Matchless plastic petrol tank badges (also suitable replacement for 1961-on
£ £ £ £ £ £
1.65 0.30 0.20 0.90 1.00 0.50
£ £ £ £ £ £
1.38 0.25 0.17 0.75 0.83 0.42
£ £
6.75 33.50
£ £
5.63 27.92
£ 5.31 £ 26.00
£ £
4.43 21.67
£ 20.00
£
16.67
£ £
7.00 7.50
027026 badges - slightly smaller but same hole centres) 018896 027027
1954-60 Matchless tank badge rubber seating (pair) Seating, rubber, for petrol tank badge, 1961-only Matchless HW and 1961-on LW (pair)
£ £
8.40 9.00
025392 048499 000150 (000151)
Beading for 028243/4 AJS 'kneeknocker' badges (pair) 1965-67 Matchless plastic petrol tank badges (pair) Screw for tank badges, very short (correct length for pre-1954 metal badges, not plastic badges with rubber seating), chrome. Also use for 000151 (same but black head)
£ 4.20 £ 42.00 £ 0.95
£ 3.50 £ 35.00 £ 0.79
£ £ £
0.95 1.00 0.60
£ £ £
0.79 0.83 0.50
£
0.60
£
0.50
£ 8.75 £ 1.00 £ 1.00 £ 11.75 £ 0.40 £ 3.15 £ 0.50 £ 3.75 £ 35.00
£ £ £ £ £ £ £ £ £
7.29 0.83 0.83 9.79 0.33 2.63 0.42 3.13 29.17
(5/16") 000153 023371 023371S (000153S)
Screw for tank badges, short (for plastic badges with rubber backing), chrome Screw for tank badges, long for chrome tank panels, chrome Screw for tank badges, 5/8" long for chrome tank panels, stainless. Can be fitted to tanks without chrome panels but needs shortening to ½ " for use with plastic badges or
3/8" for use with metal badges 031553 * 000796 000704 000797 000795 000583 021698 042425 029832 011003 35-G3-T130 013324 021282 025352 AT-30-C 021329 012019 (000599) 000200 022632 029593-5 38-G3-E142 38-G3-E140 011917 014752 016170
011924 012116 (015528) 023376
Screw for tank badges, for use on late tanks with 048499 badges, stainless Oil Tanks & Pipes Pre-1956 oil tank filter Spring for oil tank filter Dished cap for oil tank filter Oil tank filter compartment cap, chrome (on brass) Cork washer for oil tank filter cap Stud fixing oil tank, 1955 only Sleeve, oil tank bracket bottom bolt, 1960-on CS singles with left-hand oil tank Bolt fixing oil tank, top front, 1963-on road singles 1931-48 oil tank cap, 'pie-crust' type, chrome 1949-55 oil tank cap, large bayonet type, plain Oil tank cap, alloy threaded type: 1956-59 road models, 1954-on C, 1954-58 CS, 1958 CSR & all Lightweight models Oil tank cap, small bayonet type, 1959 CSR & 1960-on all Heavyweight models Washer for 'pie crust' type oil cap Cork washer for 013324 large bayonet oil tank cap Washer for 021282 small alloy screw-on oil tank cap Cork washer for 025352 small bayonet oil tank cap Oil tank drain screw (also replaces 000599)
£ £
15.00 7.50
£ £
12.50 6.25
£ £ £ £ £ £
15.00 1.00 0.55 0.50 0.55 3.35
£ £ £ £ £ £
12.50 0.83 0.46 0.42 0.46 2.79
Fibre washer for drain screw Oil tank cover screw, chrome Oil tank heat shield cover, 1963-on twins Oil pipe, return, pre-1949 Oil pipe, feed, pre-1947 Oil pipe, feed, 1947-48 Rubber connection for feed & return solid oil pipes, 1949-56 twins Fibre washer to fit 012081 & 048515 unions with filters Rubber hose tail adaptor to fit 012081 feed union, 1947-51 oil tanks Rubber hose tail adaptor to fit return pipe hole in pre-1954 oil tanks Union, oil feed pipe, engine end, singles, supplied with 015528 washer Fibre washer for 011924 engine end oil feed union (fibre used pre-1950)
£ 0.20 £ 5.75 £ 25.25 £ 27.50 £ 27.50 £ 31.25 £ 1.50 £ 0.35 £ 3.75 £ 3.75 £ 5.80 £ 0.20
£ 0.17 £ 4.79 £ 21.04 £ 22.92 £ 22.92 £ 26.04 £ 1.25 £ 0.29 £ 3.13 £ 3.13 £ 4.83 £ 0.17
Brass ferrule for neoprene or rubber oil pipe O-clip for 000950 oil pipe, stainless O-clip for 3/8" or 7/16" oil pipe, stainless
£ £ £
£ £ £
2.50 2.35 2.00
2.08 1.96 1.67
011374 (011369) 000895 000908 000950 000900 000905 014951
Jubilee clip for 3/8" or 7/16" oil pipe, stainless Jubilee clip for 1/2" oil pipe, stainless Oil pipe, use for 011369 and 011374, sold per inch - state length required Oil pipe, original type neoprene, 3/8" bore, will also stretch to fit 7/16" pipes & oil tank outlets. Sold per inch - state length required. Oil pipe, original type neoprene, 3/16" bore, for oil tank vent pipes & single rocker-oil feed connection (1964-on) etc. Sold per inch - state length required Oil pipe, original type neoprene, ½" bore. Sold per inch - state length required Oil pipe, ¼" bore, for oil tank vent pipes & single rocker box feed pipe connection (pre1964) etc. Sold per inch - state length required Clip, oil tank vent pipe, 1951-55 CS models
£ £ £ £
2.70 3.10 0.15 0.30
£ £ £ £
2.25 2.58 0.13 0.25
£
0.30
£
0.25
£ £
0.50 0.10
£ £
0.42 0.08
£
2.00
£
1.67
