GROOVING SOLUTIONS MADE SIMPLE - ATP Tools

GROOVING SOLUTIONS MADE SIMPLE STATIC AND ROTATING HIGH PERFORMANCE TOOLS

www.atptools.com

STANDARD PRODUCTS CATALOG 907

FACE GROOVING O.D. GROOVING I.D. GROOVING

Since 1953, Allied Tool Products has produced grooving tools for a wide range of industries and thousands of customers nationwide. We carry many standard tools, for all applications, from our in-stock inventory. But our true strength continues to lie in our ability to solve problems and propose solutions to difficult grooving challenges. Our experienced engineers respond quickly to your special request with a high quality concept drawing of your tool along with a competitive quote. Allied Tool Products takes pride in providing short lead times for all specials and altered standards. In the spirit of our tradition of quality work, we are committed to providing our customers with costeffective tooling systems, a superior level of service, and professional support in the field.

TABLE OF CONTENTS ALLIED TOOL PRODUCTS INSERT SELECTION CHART APPLICATION GUIDELINES (FEEDS AND SPEEDS CHART)

M5 - ATLOC GROOVING SYSTEM (Round Bars Small Shanks); Trepan possible) RH & LH

Pages 10 - 11

DB SERIES - DEEP AND CONVENTIONAL GROOVES (Holders with Support Blades, Anvils) RH & LH

Pages 12 - 17

GTH - HOG & GTH - DUCK FEET (HEAVY) GROOVING SYSTEM / RH & LH

Pages 18 - 20

FACE GROOVING SYSTEMS

Pages 6 - 9

Depth of Cut up to .31" (7.87 mm); O.D. Range 1" (25.4 mm) and greater INSERT RANGE: .031" (0.79 mm) - .250" (6.35 mm) WIDE Depth of Cut up to .21" (5.33 mm); O.D. Range 1" (25.4 mm) and greater INSERT RANGE: .062" (1.52 mm) - .250" (6.35 mm) WIDE

Depth of Cut up to 1" (25.4 mm); O.D. Range 1.875" (47.6 mm) and greater INSERT RANGE: .125" (3.175 mm) - .375" (9.525 mm) WIDE

EXTRA WIDE AND DEEP GROOVES Depth of Cut up to 2.5" (63.5 mm); O.D. Range 6" (152.4 mm) and greater INSERT RANGE: .250" (6.35 mm) - .750" (19.05 mm) WIDE

HG - ATLOC GROOVING SYSTEM / BUSY BODY HOLDERS (Square and Round Bars) RH & LH

Pages 6 - 9

Depth of Cut up to .31" (7.87 mm) INSERT RANGE: .031" (0.79 mm) - .250" (6.35 mm) WIDE / Standard with .008" RAD and Ball Nose

GH SYSTEM - OD GROOVING (Holders with Support Blades, Anvils) RH & LH

OD (EXTERNAL) GROOVING SYSTEMS

HG - ATLOC GROOVING SYSTEM / BUSY BODY HOLDERS (Square and Round Bars) RH & LH

Pages 5

Pages 21 - 23

Depth of Cut up to .375" (9.52 mm) INSERT RANGE: .031" (0.79 mm) - .250" (6.35 mm) WIDE

M8 SYSTEM - OD GROOVING (Reduced Shank Holders with Support Blades, Anvils) RH & LH

Page 24

DB SERIES - OD SYSTEM FOR DEEP GROOVES (Holders with Support Blades, Anvils) RH & LH

Pages 26 - 31

GTH - HOG & GTH - DUCK FEET (HEAVY) GROOVING SYSTEM / RH & LH

Pages 18 - 20

D SYSTEM - ID GROOVING (Conventional) RH & LH

Pages 32 - 33

M12 MINIATURE SYSTEM - ID GROOVING / RH & LH

Pages 34 - 36

DB SERIES - ID One Piece Bar - SYSTEM FOR DEEP GROOVES / RH & LH

Pages 37 - 38

DB SERIES - ID DASH - DEEP GROOVES (Holders with Support Blades, Anvils) / RH & LH

Pages 39 - 41

Depth of Cut up to .25" (6.35 mm) INSERT RANGE: .031" (0.79 mm) - .250" (6.35 mm) WIDE

Depth of Cut up to .50" (12.7 mm) & up to 1.25" (31.75 mm) INSERT RANGE: .125" (3.175 mm) - .375" (9.525 mm) WIDE EXTRA WIDE AND DEEP GROOVES Depth of Cut up to 2.5" (63.5 mm) INSERT RANGE: .250" (6.35 mm) - .750" (19.05 mm) WIDE

For 1" (25.4 mm) Bores and Larger Depth of Cut up to .218" (5.54 mm) INSERT RANGE: .031" (1.52 mm) - .250" (6.35 mm) WIDE

ID (INTERNAL) GROOVING SYSTEMS

Page 4

For .50" (12.7 mm) Bores and Larger Depth of Cut up to .218" (5.54 mm) INSERT RANGE: .031" (1.52 mm) - .250" (6.35 mm) WIDE

For 1.25" (31.75 mm) Bores and Larger Depth of Cut up to .31" (7.87 mm) INSERT RANGE: .125" (3.175 mm) - .375" (9.525 mm) WIDE For 2.095" (53.2 mm) Bores and Larger Depth of Cut up to .75" (19.05 mm) INSERT RANGE: .125" (3.175 mm) - .375" (9.525 mm) WIDE

HOW TO ORDER

Page 25, 42 - 43 1

FORM GRINDING – GROVE SHAPES Samples of Special Insert Forms

Corner Radii

Full Ball Radius

Profile

Step Groove

Corner Chamfer

Face or Undercut

Groove Even Chamfers

PRODUCTS

2

Sample A-6 Sample A-9

Sample A-3


Sample A-2


Sample A-1

Samples of Standard and Special Tools

Groove Uneven Chamfers

Samples A-23

Sample A-18

Sample A-19

Sample A-22

Sample A-17

Sample A-21

Sample A-20

Sample A-16

Sample A-15

Sample A-14

Sample A-13

Sample A-12

Sample A-10

PRODUCTS


3

ALLIED TOOL PRODUCTS CARBIDE INSERT SELECTION CHART INSERT DESIGNATIONS FOR CARBIDE GRADES, COATINGS AND GEOMETRIES ARE THE SAME FOR ANY APPLICATION

INSERT DESIGNATION

KEY: FG = (FACE GROOVING); OD = (EXTERNAL GROOVING); ID = (INTERNAL GROOVING); RH = (RIGHT HAND), LH = (LEFT HAND) EXAMPLE: TO ORDER HG - ATLOC (RH) INSERT FOR .125" FACE GROOVE IN 316 STAINLESS STEEL, SPECIFY: X2- HG-FG + (.125" Wide Insert No.) 13125R

HG - ATLOCK - INSERT OPTIONS: FG = (FACE GROOVING), OD = (EXTERNAL GROOVING), ID = (INTERNAL GROOVING) X1-HG

GENERAL PURPOSE APPLICATIONS; GOOD IN ALL STEELS AND 400 SERIES STAINLESS STEELS High quality FINE GRAIN carbide substrate with the Multi layer universal TiAlN coating; 6 DEGREES POSITIVE top rake

X2-HG

STEEL ALLOYS, 300 SERIES STAINLESS STEELS, HIGH TEMP ALLOYS, TITANIUM AND NICKEL BASED ALLOYS High quality EXTRA FINE GRAIN carbide substrate with the Multi layer universal TiAlN coating; 6 degrees positive top rake

AL2-HG

CAST IRON, GREY IRON, COMPACTED GRAPHITE IRON A Superior hardness carbide substrate with a special high-performance AlTiN coating with neutral 0 degrees top rake HG - ATLOCK ALUMINUM ALLOYS, MAGNESIUM, COPPER AND ZINC ALLOYS, COMPOSITES, AND NON-FERROUS MATERIALS

ZN2-HG

An exceptional combination of EXTRA fine carbide substrate and superior ZrN coating with 12 degrees positive top rake

GI - ATLOCK - INSERT OPTIONS: FG = (FACE GROOVING), OD = (EXTERNAL GROOVING), ID = (INTERNAL GROOVING) X1-GI


X2-GI

STEEL ALLOYS, 300 SERIES STAINLESS STEELS, HIGH TEMP ALLOYS, TITANIUM AND NICKEL BASED ALLOYS High quality EXTRA FINE GRAIN carbide substrate with the Multi layer universal TiAlN coating; 6 degrees positive top rake

AL2-GI

CAST IRON, GREY IRON, COMPACTED GRAPHITE IRON A Superior hardness carbide substrate with a special high-performance AlTiN coating with neutral 0 degrees top rake

ZN2-GI

ALUMINUM ALLOYS, MAGNESIUM, COPPER AND ZINC ALLOYS, COMPOSITES, AND NON-FERROUS MATERIALS An exceptional combination of EXTRA fine carbide substrate and superior ZrN coating with 12 degrees positive top rake

GI - ATLOCK

DB - INSERT OPTIONS: FG = (FACE GROOVING), OD = (EXTERNAL GROOVING), ID = (INTERNAL GROOVING) X1-DB


X2-DB STEEL ALLOYS, 300 SERIES STAINLESS STEELS, HIGH TEMP ALLOYS, TITANIUM AND NICKEL BASED ALLOYS High quality EXTRA FINE GRAIN carbide substrate with the Multi layer universal TiAlN coating; 6 degrees positive top rake AL2-DB CAST IRON, GREY IRON, COMPACTED GRAPHITE IRON

A Superior hardness carbide substrate with a special high-performance AlTiN coating with neutral 0 degrees top rake

ZN2-DB

DB (DOG BONE) ALUMINUM ALLOYS, MAGNESIUM, COPPER AND ZINC ALLOYS, COMPOSITES, AND NON-FERROUS MATERIALS An exceptional combination of EXTRA fine carbide substrate and superior ZrN coating with 12 degrees positive top rake

GTH - HOG / GTH - DUCK FEET - INSERT OPTIONS: FG = (FACE GROOVING), OD = (EXTERNAL GROOVING) X1-GTH GENERAL PURPOSE APPLICATIONS; GOOD IN ALL STEELS AND 400 SERIES STAINLESS STEELS High quality FINE GRAIN carbide substrate with the Multi layer universal TiAlN coating; 6 DEGREES POSITIVE top rake X2-GTH STEEL ALLOYS, 300 SERIES STAINLESS STEELS, HIGH TEMP ALLOYS, TITANIUM AND NICKEL BASED ALLOYS GTH - HOG High quality EXTRA FINE GRAIN carbide substrate with the Multi layer universal TiAlN coating; 6 degrees positive top rake AL2-GTH CAST IRON, GREY IRON, COMPACTED GRAPHITE IRON A Superior hardness carbide substrate with a special high-performance AlTiN coating with neutral 0 degrees top rake ZN2-GTH ALUMINUM ALLOYS, MAGNESIUM, COPPER AND ZINC ALLOYS, COMPOSITES, AND NON-FERROUS MATERIALS An exceptional combination of EXTRA fine carbide substrate and superior ZrN coating with 12 degrees positive top rake GTH - DUCK FEET TOLERANCES: UNLESS OTHERWISE SPECIFIED, INSERT TOLERANCES FOR STANDARDS AND SPECIAL FORMS: W (WIDTH) +/- .001" ANGLES +/- 30" NOTE: OTHER CARBIDE GRADES, INSERT FORMS, GEOMETRIES AND COATINGS AVAILABLE PER REQUEST Other Coatings: TiN - Very good general purpose coating for a variety of materials TiCN - Excellent coating for multi purpose tough applications and interrupted cuts NANO-TEK - Special NEW nanocomposite structure coating. This coating marks a breakthrough in PVD coatings for improving wear resistance in very hard work materials, 40 HRC and higher. Excellent in Titanium and Super Alloys

4

APPLICATION GUIDELINES (FEEDS AN SPEEDS CHART)

MATERIAL

SFM

IPR

Low Carbon Steels (Less than .30% C)

250 - 700

.002 - .008

Construction steel / case hardening

200 - 500

.002 - .008

High Carbon (Greater than .30% C)

120 - 400

.002 - .007

AISI 1000 & 1100 Steels

250 - 700

.002 - .008

1200 Series

200 - 700

.002 - .007

AISI 1300, 4000

250 - 700

.002 - .008

AISI 4100 - 9000 Series

120 - 400

.002 - .006

100 - 250

.001 - .006

Martensitic Stainless Steel 400 Series

100 - 350

.001 - .006

Austenitic Stainless Steel 300 Series

150 - 350

.002 - .006

15-5 PH, 17-4 PH

100 - 300

.002 - .006

Grey Iron

100 - 600

.002 - .006

Nodular Graphite Iron

200 - 600

.002 - .006

Malleable Cast Iron

150 - 800

.002 - .010

Aluminum Cast Alloys > 6% Si

400 - 900

.002 - .010

Aluminum Cast Alloys< 6% Si

300 - 800

.002 - .010

Aluminum Wrought Alloys

400 - 900

.002 - .010

Magnesium Alloys

300 - 900

.002 - .010

Titanium and Nickel Alloys

100 - 250

.001 - .006

Plastics / Composites

100 - 600

.001 - .008

Carbon Steels

Alloy Steels

Tool Steels Examples: A-2, D-2, M-2, H-13 Stainless Steels

Cast Irons

Aluminum / Magnesium

5

HG – ATLOC GROOVING SYSTEM / BUSY BODY HOLDERS FACE GROOVING AND OD GROOVING Depth of cut: Up to .21" (5.33 mm) This versatile system offers a superior side locking dove-tail pocket fit, an extremely rigid assembly without a support blade (anvil).

FACE GROOVING O.D. 1" (25.4 mm) DIA MINIMUM All holders could be used interchangeably for FaceGrooving, OD Grooving Applications HG - ATLOCK (RH) INSERTS, DOUBLE ENDED

HOLDER OPTIONS FOR RH (Right Hand)

.031" (0.79 mm) - .187" (4.75 mm) WIDE All standard inserts come with .008" (0.2 mm) RAD.

END CUTTING HG 4-3RH (Square Shank)

HG 6-3RH HG 8-3RH HG 10-3RH HG 12-3RH HG 16-3RH HG 20-3RH

.25" H x .50" W x 3.0" .375" H x .50" W x 3.0" .50" SQ x 3.0" .625" SQ x 6.0" .75" SQ x 5.0" 1.00" SQ x 6.0" 1.25" SQ x 6.0"

RIGHT ANGLE

HGEX 4-3 HGEX 6-3 HGEX 8-3 HGEX 10-3 HGEX 12-3 HGEX 16-3 HGEX 20-3

.25" H x .75" W x 3.0" .375" H x .75" W x 3.0" .50" H x .75" W x 3.0" .625" H x .75" W x 3.0" .75" H x1" W x 5.0" 1.00" SQ x 6.0" 1.25" SQ x 6.0"

END CUT

H5-R3 12J H5-R3 16J H5-R3 20J

Shank DIA = .75" Dia. x 4.0" Oal Shank DIA = 1.00" Dia. x 4.0" Oal Shank DIA = 1.25" Dia. x 4.0" Oal

(Square Shank)

INSERT OPTIONS:

Carbide grades, chip breakers and coatings are stocked for applications based on work materials: Steels, Stainless Steels, Cast Irons, Aluminum, Composites. (For ordering designations see Page 4, or specify work material)

(Round Mount)

OD INSERTS HG-OD ATLOCK (RH) RIGHT HAND INSERT NUMBER

WIDTH (INCH)

03031R

0.031

03062R

0.062

03093R

0.093

03125R

0.125

03156R

0.156

03187R

0.187

MAX DEPTH OF CUT 0.125 0.187 0.210

OD INSERTS FULL RADIUS (BALL NOSE) HG-OD ATLOCK (RH) RIGHT HAND INSERT NUMBER

WIDTH (INCH)

33031R

0.031

33062R

0.062

33093R

0.093

33125R

0.125

33156R

0.156

33187R

0.187

MAX DEPTH OF CUT 0.125 0.187 0.210

FACE GROOVING INSERTS MIN O.D. 1" (25.4 mm) HG-FG ATLOCK (RH) RIGHT HAND Part Rotation Counter-Clockwise (CCW) INSERT NUMBER

WIDTH (INCH)

MAX DEPTH OF CUT

13031R

0.031

0.062

13062R

0.062

0.093

13093R

0.093

0.187

13125R

0.125

13156R

0.156

13187R

0.187

0.210

FACE GROOVING INSERTS MIN O.D. 1" (25.4 mm) HG-FG ATLOCK (RH) RIGHT HAND Part Rotation Clockwise (CW) INSERT NUMBER

WIDTH (INCH)

MAX DEPTH OF CUT

23031R

0.031

0.062

23062R

0.062

0.093

23093R

0.093

0.187

23125R

0.125

23156R

0.156

23187R

0.187

0.210

SPARE PARTS: CLAMP NUMBER (C-1) • SCREW NUMBER (C1S)

6


FACE GROOVING O.D. 1" (25.4 mm) DIA MINIMUM All holders could be used interchangeably for FaceGrooving, OD Grooving Applications HG - ATLOCK (LH) INSERTS, DOUBLE ENDED

HOLDER OPTIONS FOR LH (Left Hand)


END CUTTING

HG 4-3LH HG 6-3LH HG 8-3LH HG 10-3LH HG 12-3LH HG 16-3LH HG 20-3LH

.25" H x .50" W x 3.0" .375" H x .50" W x 3.0" .50" SQ x 3.0" .625" SQ x 6.0" .75" SQ x 5.0" 1.00" SQ x 6.0" 1.25" SQ x 6.0"

RIGHT ANGLE

HGIN 4-3 HGIN 6-3 HGIN 8-3 HGIN 10-3 HGIN 12-3 HGIN 16-3 HGIN 20-3

.25" H x .75" W x 3.0" .375" H x .75" W x 3.0" .50" H x .75" W x 3.0" .625" H x .75" W x 3.0" .75" H x1" W x 5.0" 1.00" SQ x 6.0" 1.25" SQ x 6.0"

END CUT

H5-L3 12J H5-L3 16J H5-L3 20J

Shank DIA = .75" Dia. x 4.0" Oal Shank DIA = 1.00" Dia. x 4.0" Oal Shank DIA = 1.25" Dia. x 4.0" Oal

(Square Shank)

(Square Shank)

INSERT OPTIONS:


(Round Mount)

OD INSERTS HG-OD ATLOCK (LH) LEFT HAND INSERT NUMBER

WIDTH (INCH)

03031L

0.031

03062L

0.062

03093L

0.093

03125L

0.125

03156L

0.156

03187L

0.187

MAX DEPTH OF CUT 0.125 0.187 0.210

OD INSERTS FULL RADIUS (BALL NOSE) HG-OD ATLOCK (LH) LEFT HAND INSERT NUMBER

WIDTH (INCH)

33031L

0.031

33062L

0.062

33093L

0.093

33125L

0.125

33156L

0.156

33187L

0.187

MAX DEPTH OF CUT 0.125 0.187 0.210

FACE GROOVING INSERTS MIN O.D. 1" (25.4 mm) HG-FG ATLOCK (LH) LEFT HAND Part Rotation Counter-Clockwise (CCW) INSERT NUMBER

WIDTH (INCH)

MAX DEPTH OF CUT

13031L

0.031

0.062

13062L

0.062

0.093

13093L

0.093

0.187

13125L

0.125

13156L

0.156

13187L

0.187

0.210

FACE GROOVING INSERTS MIN O.D. 1" (25.4 mm) HG-FG ATLOCK (LH) LEFT HAND Part Rotation Clockwise (CW) INSERT NUMBER

WIDTH (INCH)

MAX DEPTH OF CUT

23031L

0.031

0.062

23062L

0.062

0.093

23093L

0.093

0.187

23125L

0.125

23156L

0.156

23187L

0.187

0.210


7


FACE GROOVING O.D. 1" (25.4 mm) DIA MINIMUM All holders could be used interchangeably for FaceGrooving, OD Grooving Applications HOLDER OPTIONS FOR RH (Right Hand)

HG - ATLOCK (RH) INSERTS, DOUBLE ENDED .031" (0.79 mm) - .250" (6.35 mm) WIDE All standard inserts come with .008" (0.2 mm) RAD.

END CUTTING

HG 12-4RH HG 16-4RH HG 20-4RH

.75" SQ x 5.0" 1.00" SQ x 6.0" 1.25" SQ x 6.0"

RIGHT ANGLE

HGEX 12-4 HGEX 16-4 HGEX 20-4

.75" H x1.00" W x 5.0" 1.00" SQ x 6.0" 1.25" SQ x 6.0"

END CUT

H5-R4 16J H5-R4 20J H5-R4 24J

Shank DIA = 1.00" x 4.0" Oal Shank DIA = 1.25" x 4.0" Oal Shank DIA = 1.50" x 4.0" Oal

(Square Shank)

(Square Shank)

INSERT OPTIONS:

(Round Mount)


FACE GROOVING INSERTS MIN O.D. 1" (25.4 mm) HG-FG ATLOCK (RH) RIGHT HAND Part Rotation Counter-Clockwise (CCW)

OD INSERTS HG-OD ATLOCK (RH) RIGHT HAND

INSERT NUMBER

WIDTH (INCH)

MAX DEPTH OF CUT

0.062

14062R

0.062

0.093

04093R

0.093

14093R

0.093

0.125

04125R

0.125

14125R

0.125

0.250

04156R

0.156

14156R

0.156

04187R

0.187

14187R

0.187

04218R

0.218

14218R

0.218

04250R

0.250

14250R

0.250

INSERT NUMBER

WIDTH (INCH)

04062R

MAX DEPTH OF CUT

0.310

OD INSERTS FULL RADIUS (BALL NOSE) HG-OD ATLOCK (RH) RIGHT HAND INSERT NUMBER

WIDTH (INCH)

34062R

0.062

34093R

0.093

34125R

0.125

34156R

0.156

34187R

0.187

34218R

0.218

34250R

0.250

MAX DEPTH OF CUT

0.310

0.310

FACE GROOVING INSERTS MIN O.D. 1" (25.4 mm) HG-FG ATLOCK (RH) RIGHT HAND Part Rotation Clockwise (CW) INSERT NUMBER

WIDTH (INCH)

MAX DEPTH OF CUT

24062R

0.062

0.093

24093R

0.093

0.125

24125R

0.125

0.250

24156R

0.156

24187R

0.187

24218R

0.218

24250R

0.250

0.310


8


FACE GROOVING O.D. 1" (25.4 mm) DIA MINIMUM All holders could be used interchangeably for FaceGrooving, OD Grooving Applications HOLDER OPTIONS FOR LH (Left Hand)

HG - ATLOCK (LH) INSERTS, DOUBLE ENDED .031" (0.79 mm) - .250" (6.35 mm) WIDE All standard inserts come with .008" (0.2 mm) RAD.

END CUTTING

HG 12-4LH HG 16-4LH HG 20-4LH

.75" SQ x 5.0" 1.00" SQ x 6.0" 1.25" SQ x 6.0"

RIGHT ANGLE

HGIN 12-4 HGIN 16-4 HGIN 20-4

.75" H x1.00" W x 5.0" 1.00" SQ x 6.0" 1.25" SQ x 6.0"

END CUT

H5-L4 16J H5-L4 20J H5-L4 24J

Shank DIA = 1.00" x 4.0" Oal Shank DIA = 1.25" x 4.0" Oal Shank DIA = 1.50" x 4.0" Oal

(Square Shank)

(Square Shank)

INSERT OPTIONS:

(Round Mount)


FACE GROOVING INSERTS MIN O.D. 1" (25.4 mm) HG-FG ATLOCK (LH) LEFT HAND Part Rotation Counter-Clockwise (CCW)

OD INSERTS HG-OD ATLOCK (LH) LEFT HAND

INSERT NUMBER

WIDTH (INCH)

MAX DEPTH OF CUT

0.062

14062L

0.062

0.093

04093L

0.093

14093L

0.093

0.125

04125L

0.125

14125L

0.125

0.250

04156L

0.156

14156L

0.156

04187L

0.187

14187L

0.187

04218L

0.218

14218L

0.218

04250L

0.250

14250L

0.250

INSERT NUMBER

WIDTH (INCH)

04062L

MAX DEPTH OF CUT

0.310

OD INSERTS FULL RADIUS (BALL NOSE) HG-OD ATLOCK (LH) LEFT HAND INSERT NUMBER

WIDTH (INCH)

34062L

0.062

34093L

0.093

34125L

0.125

34156L

0.156

34187L

0.187

34218L

0.218

34250L

0.250

MAX DEPTH OF CUT

0.310

0.310

FACE GROOVING INSERTS MIN O.D. 1" (25.4 mm) HG-FG ATLOCK (LH) LEFT HAND Part Rotation Clockwise (CW) INSERT NUMBER

WIDTH (INCH)

MAX DEPTH OF CUT

24062L

0.062

0.093

24093L

0.093

0.125

24125L

0.125

0.250

24156L

0.156

24187L

0.187

24218L

0.218

24250L

0.250

0.310


9

M5 SYSTEM – FACE GROOVING OD RANGE 1.0" (25.4mm) and GREATER Depth of cut: Up to .210" (5.33 mm)) M5 SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly without a support blade (anvil).

GI-FG-M5 ATLOCK INSERTS, DOUBLE ENDED



INSERT OPTIONS:


DIA x 3.5" OAL

HOLDER BODY INCLUDES CLAMPS AND CLAMP SCREWS

PART ROTATION - COUNTER-CLOCKWISE (CCW) INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

1MRJO2

0.062

.125"

1MRJO3

0.093

.156"

M5-R1-05J

.500"

M5-R1-06J

.625"

M5-R1-07J

.750"

M5-R1-10J

1.00"

1MRJO4

0.125

.210"

1MRJO5

0.156

1MRJO6

0.187

.210"

M5-R2-05J

.500"

M5-R2-06J

.625"

M5-R2-07J

.750"

M5-R2-10J

1.00"

1MRJO7

0.218

1MRJO8

0.250

.210"

M5-R3-05J

.500"

M5-R3-06J

.625"

M5-R3-07J

.750"

M5-R3-10J

1.00"

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

M5-R1-05J

.500"

M5-R1-06J

.625"

M5-R1-07J

.750"

M5-R1-10J

1.00"

.210"

M5-R2-05J

.500"

M5-R2-06J

.625"

M5-R2-07J

.750"

M5-R2-10J

1.00"

.210"

M5-R3-05J

.500"

M5-R3-06J

.625"

M5-R3-07J

.750"

M5-R3-10J

1.00"

PART ROTATION - CLOCKWISE (CW) INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

2MRJO2

0.062

.125"

2MRJO3

0.093

.156"

2MRJO4

0.125

.210"

2MRJO5

0.156

2MRJO6

0.187

2MRJO7

0.218

2MRJO8

0.250

SPARE PARTS: CLAMP (C1) • SCREW (C1S)

10

M5 SYSTEM – FACE GROOVING OD RANGE 1" (25.4mm) AND GREATER Depth of cut: Up to .210" (5.33 mm)) M5 SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly without a support blade (anvil).

GI-FG-M5 ATLOCK INSERTS, DOUBLE ENDED



INSERT OPTIONS:


DIA x 3.5" OAL

HOLDER BODY INCLUDES CLAMPS AND CLAMP SCREWS

PART ROTATION - COUNTER-CLOCKWISE (CCW) INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

1MLJO2

0.062

.125"

1MLJO3

0.093

.156"

M5-L1-05J

.500"

M5-L1-06J

.625"

M5-L1-07J

.750"

M5-L1-10J

1.00"

1MLJO4

0.125

.210"

1MLJO5

0.156

1MLJO6

0.187

.210"

M5-L2-05J

.500"

M5-L2-06J

.625"

M5-L2-07J

.750"

M5-L2-10J

1.00"

1MLJO7

0.218

1MLJO8

0.250

.210"

M5-L3-05J

.500"

M5-L3-06J

.625"

M5-L3-07J

.750"

M5-L3-10J

1.00"

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

HOLDER NO.

SHANK DIA

M5-L1-05J

.500"

M5-L1-06J

.625"

M5-L1-07J

.750"

M5-L1-10J

1.00"

.210"

M5-L2-05J

.500"

M5-L2-06J

.625"

M5-L2-07J

.750"

M5-L2-10J

1.00"

.210"

M5-L3-05J

.500"

M5-L3-06J

.625"

M5-L3-07J

.750"

M5-L3-10J

1.00"

PART ROTATION - CLOCKWISE (CW) INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

2MLJO2

0.062

.125"

2MLJO3

0.093

.156"

2MLJO4

0.125

.210"

2MLJO5

0.156

2MLJO6

0.187

2MLJO7

0.218

2MLJO8

0.250

SPARE PARTS: CLAMP (C1) • SCREW (C1S)

11

DB SERIES – Face Grooving System for Deep Grooves 0%3BOHF NN BOE(SFBUFS %FQUIPG$VU6QUP NN

7#BTF*OTFSUQSPWJEFTNBYJNVNTUBCJMJUZBOESJHJEJUZJO%FFQ(SPPWJOH"QQMJDBUJPOT %#'(%PH#POF4UZMF*OTFSUT %PVCMF&OEFE .125" (3.175 mm) – .375" (9.525 mm) Wide All standard inserts come with .008" (0.2 mm) RAD.

)PMEFS#PEZ0QUJPOTGPS3) 3JHIU)BOE

&/%$655*/( (Square Shank)

W 1.125”

3*()5"/(-& (Square Shank)

R

*OTFSU0QUJPOT Carbide grades, chip breakers and coatings are stocked for applications based on work materials: Steels, Stainless Steels, Cast Irons, Aluminum, Composites. For ordering designations see page 4, or specify work material.

&/%$65 (Round Mount)

DB7-1-5-16R

1" SQ x 6"

DB7-1-5-20R

1.25" SQ x 7"

DB7-1-5-24R

1.5" SQ x 7"

DB8-1-5-165

1"H x 1.25 W x 7"

DB8-1-5-205

1.25" SQ x 7"

DB8-1-5-245

1.50" SQ x 7"

DB9-1-5-24R

D = 1.50" x 8.5" Long

DB9-1-5-32R

D = 2.00" x 8.5" Long

DB9-1-5-40R

D = 2.50" x 8.5" Long

Holder Bodies include anvil and clamp screws.

3JHIU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF*Ot$PVOUFS-$MPDLwJTF3PUBUJPO $$8 "/7*-40%3"/(& */4&354

"/7*-40%3"/(&

8*%5) */$) o o o

DB1104

0.125

DB1105

0.156

DB1106

0.187

DB1107

0.218

DB1108

0.250

DB1109

0.281

DB1110

0.312

DB1111

0.343

DB1112

0.375

DBA-1104

DBA-1204

DBA-1304

o

*/4&354

DBA-1404

DB1504

0.125

DB1505

0.156

DB1506

0.187

DB1507

0.218

DB1508

0.250

DB1509

0.281

DB1510

0.312

DB1511

0.343

DB1512

0.375

DBA-1105

DBA-1205

DBA-1305

DBA-1405

DBA-1107

DBA-1207

DBA-1307

DBA-1407

DBA-1109

DBA-1209

DBA-1309

DBA-1111

DBA-1211

DBA-1311

8*%5) */$) o

0

$-".14

DBA-1504

DBA-1604

CR1-1-E04

DBA-1505

DBA-1605

CR1-1-E06

DBA-1507

DBA-1607

CR1-1-E07

DBA-1509

CR1-1-E09

DBA-1511

CR1-1-E11

3JHIU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF0VU t$MPDLwJTF3PUBUJPO $8 "/7*-40%3"/(& */4&354

12

"/7*-40%3"/(&

8*%5) */$) o o o

DB2104

0.125

DB2105

0.156

DB2106

0.187

DB2107

0.218

DB2108

0.250

DB2109

0.281

DB2110

0.312

DB2111

0.343

DB2112

0.375

DBA-2104

DBA-2204

DBA-2304

o

*/4&354

DBA-2404

DB2504

0.125

DB2505

0.156

DB2506

0.187

DB2507

0.218

DB2508

0.250

DB2509

0.281

DB2510

0.312

DBA-2105

DBA-2205

DBA-2305

DBA-2405

DBA-2107

DBA-2207

DBA-2307

DBA-2407

DBA-2109

DBA-2209

DBA-2309

DBA-2111

DBA-2211

DBA-2311

4QBSF1BSUT"OWJM4DSFXT %"4 t$MBNQ4DSFXT %$4

8*%5) */$) o

DB2511

0.343

DB2512

0.375

0

$-".14

DBA-2504

DBA-2604

CR1-1-E04

DBA-2505

DBA-2605

CR1-1-E06

DBA-2507

DBA-2607

CR1-1-E07

DBA-2509

CR1-1-E09

DBA-2511

CR1-1-E11



)PMEFS#PEZ0QUJPOTGPS-) -FGU)BOE


W 1.125”


R



DB7-1-5-16L

1" SQ x 6"

DB7-1-5-20L

1.25" SQ x 7"

DB7-1-5-24L

1.5" SQ x 7"

DB8-1-5-160

1"H x 1.25 W x 7"

DB8-1-5-200

1.25" SQ x 7"

DB8-1-5-240

1.50" SQ x 7"

DB9-1-5-24L

D = 1.50" x 8.5" Long

DB9-1-5-32L

D = 2.00" x 8.5" Long

DB9-1-5-40L

D = 2.50" x 8.5" Long


-FGU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF*Ot$MPDLwJTF3PUBUJPO $8 "/7*-40%3"/(& */4&354

"/7*-40%3"/(&

8*%5) */$) o o o

DB5104

0.125

DB5105

0.156

DB5106

0.187

DB5107

0.218

DB5108

0.250

DB5109

0.281

DB5110

0.312

DB5111

0.343

DB5112

0.375

DBA-5104

DBA-5204

DBA-5304

o

*/4&354

DBA-5404

DB5504

0.125

DB5505

0.156

DB5506

0.187

DB5507

0.218

DB5508

0.250

DB5509

0.281

DB5510

0.312

DB5511

0.343

DB5512

0.375

DBA-5105

DBA-5205

DBA-5305

DBA-5405

DBA-5107

DBA-5207

DBA-5307

DBA-5407

DBA-5109

DBA-5209

DBA-5309

DBA-5111

DBA-5211

DBA-5311

8*%5) */$) o

0

$-".14

DBA-5504

DBA-5604

CL1-1-E04

DBA-5505

DBA-5605

CL1-1-E06

DBA-5507

DBA-5607

CL1-1-E07

DBA-5509

CL1-1-E09

DBA-5511

CL1-1-E11

-FGU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF0VU t$PVOUFS-$MPDLwJTF3PUBUJPO $$8 "/7*-40%3"/(& */4&354

"/7*-40%3"/(&

8*%5) */$) o o o

DB6104

0.125

DB6105

0.156

DB6106

0.187

DB6107

0.218

DB6108

0.250

DB6109

0.281

DB6110

0.312

DB6111

0.343

DB6112

0.375

DBA-6104

DBA-6204

DBA-6304

o

*/4&354

DBA-6404

DB6504

0.125

DB6505

0.156

DB6506

0.187

DB6507

0.218

DB6508

0.250

DBA-6105

DBA-6205

DBA-6305

DBA-6405

DBA-6107

DBA-6207

DBA-6307

DBA-6407

DBA-6109

DBA-6209

DBA-6309

DBA-6111

DBA-6211

DBA-6311

DB6509

8*%5) */$) o

0.281

DB6510

0.312

DB6511

0.343

DB6512

0.375

0

$-".14

DBA-6504

DBA-6604

CL1-1-E04

DBA-6505

DBA-6605

CL1-1-E06

DBA-6507

DBA-6607

CL1-1-E07

DBA-6509

CL1-1-E09

DBA-6511

CL1-1-E11


13





W 1.125”


R



DB7-1-7-16R

1" SQ x 6"

DB7-1-7-20R

1.25" SQ x 7"

DB7-1-7-24R

1.5" SQ x 7"

DB8-1-7-165

1"H x 1.25 W x 7"

DB8-1-7-205

1.25" SQ x 7"

DB8-1-7-245

1.50" SQ x 7"

DB9-1-7-24R

D = 1.50" x 8.5" Long

DB9-1-7-32R

D = 2.00" x 8.5" Long

DB9-1-7-40R

D = 2.50" x 8.5" Long


3JHIU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF*Ot$PVOUFS-$MPDLwJTF3PUBUJPO $$8 "/7*-40%3"/(& */4&354

"/7*-40%3"/(&

8*%5) */$) o o o

DB1104

0.125

DB1105

0.156

DB1106

0.187

DB1107

0.218

DB1108

0.250

DB1109

0.281

DB1110

0.312

DB1111

0.343

DB1112

0.375

DBA-3104

DBA-3204

DBA-3304

o

*/4&354

DBA-3404

DB1504

0.125

DB1505

0.156

DB1506

0.187

DB1507

0.218

DB1508

0.250

DB1509

0.281

DB1510

0.312

DB1511

0.343

DB1512

0.375

DBA-3105

DBA-3205

DBA-3305

DBA-3405

DBA-3107

DBA-3207

DBA-3307

DBA-3407

DBA-3109

DBA-3209

DBA-3309

DBA-3111

DBA-3211

DBA-3311

8*%5) */$) o

0

$-".14

DBA-3504

DBA-3604

CR1-1-E04A

DBA-3505

DBA-3605

CR1-1-E06A

DBA-3507

DBA-3607

CR1-1-E07A

DBA-3509

CR1-1-E09A

DBA-3511

CR1-1-E11A

3JHIU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF0VU t $MPDLwJTF3PUBUJPO $8 "/7*-40%3"/(& */4&354

14

"/7*-40%3"/(&

8*%5) */$) o o o

DB2104

0.125

DB2105

0.156

DB2106

0.187

DB2107

0.218

DB2108

0.250

DB2109

0.281

DB2110

0.312

DB2111

0.343

DB2112

0.375

DBA-4104

DBA-4204

DBA-4304

o

*/4&354

DBA-4404

DB2504

0.125

DB2505

0.156

DB2506

0.187

DB2507

0.218

DB2508

0.250

DB2509

0.281

DB2510

0.312

DB2511

0.343

DB2512

0.375

DBA-4105

DBA-4205

DBA-4305

DBA-4405

DBA-4107

DBA-4207

DBA-4307

DBA-4407

DBA-4109

DBA-4209

DBA-4309

DBA-4111

DBA-4211

DBA-4311


8*%5) */$) o

0

$-".14

DBA-4504

DBA-4604

CR1-1-E04A

DBA-4505

DBA-4605

CR1-1-E06A

DBA-4507

DBA-4607

CR1-1-E07A

DBA-4509

CR1-1-E09A

DBA-4511

CR1-1-E11A





W 1.125”


R



DB7-1-7-16L

1" SQ x 6"

DB7-1-7-20L

1.25" SQ x 7"

DB7-1-7-24L

1.5" SQ x 7"

DB8-1-7-160

1"H x 1.25 W x 7"

DB8-1-7-200

1.25" SQ x 7"

DB8-1-7-240

1.50" SQ x 7"

DB9-1-7-24L

D = 1.50" x 8.5" Long

DB9-1-7-32L

D = 2.00" x 8.5" Long

DB9-1-7-40L

D = 2.50" x 8.5" Long


-FGU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF*Ot$MPDLwJTF3PUBUJPO $8 "/7*-40%3"/(& */4&354

"/7*-40%3"/(&

8*%5) */$) o o o

DB5104

0.125

DB5105

0.156

DB5106

0.187

DB5107

0.218

DB5108

0.250

DB5109

0.281

DB5110

0.312

DB5111

0.343

DB5112

0.375

DBA-7104

DBA-7204

DBA-7304

o

*/4&354

DBA-7404

DB5504

0.125

DB5505

0.156

DB5506

0.187

DB5507

0.218

DB5508

0.250

DB5509

0.281

DB5510

0.312

DB5511

0.343

DB5512

0.375

DBA-7105

DBA-7205

DBA-7305

DBA-7405

DBA-7107

DBA-7207

DBA-7307

DBA-7407

DBA-7109

DBA-7209

DBA-7309

DBA-7111

DBA-7211

DBA-7311

8*%5) */$) o

0

$-".14

DBA-7504

DBA-7604

CL1-1-E04A

DBA-7505

DBA-7605

CL1-1-E06A

DBA-7607

CL1-1-E07A

DBA-7507

DBA-7509

CL1-1-E09A

DBA-7511

CL1-1-E11A

-FGU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF0VU t$PVOUFS-$MPDLwJTF3PUBUJPO $$8

"/7*-40%3"/(& */4&354

"/7*-40%3"/(&

8*%5) */$)

DB6104

0.125

DB6105

0.156

DB6106

0.187

DB6107

0.218

DB6108

0.250

DB6109

0.281

DB6110

0.312

DB6111

0.343

DB6112

0.375

DBA-8104

DBA-8204

DBA-8304

*/4&354

DBA-8404

DB6504

0.125

DB6505

0.156

DB6506

0.187

DB6507

0.218

DB6508

0.250

DB6509

0.281 0.281

DB6510

0.312

DB6511

0.343

DB6512

0.375

DBA-8105

DBA-8205

DBA-8305

DBA-8405

DBA-8107

DBA-8207

DBA-8307

DBA-8407

DBA-8109

DBA-8209

DBA-8309

DBA-8111

DBA-8211

DBA-8311

8*%5) */$)

0

$-".14

DBA-8504

DBA-8604

CL1-1-E04A

DBA-8505

DBA-8605

CL1-1-E06A

DBA-8507

DBA-8607

CL1-1-E07A

DBA-8509

CL1-1-E09A

DBA-8511

CL1-1-E11A


15





W 1.44”


R



DB7-1-1-16R

1" SQ x 6"

DB7-1-1-20R

1.25" SQ x 7"

DB7-1-1-24R

1.5" SQ x 7"

DB8-1-1-165

1"H x 1.25 W x 7"

DB8-1-1-205

1.25" SQ x 7"

DB8-1-1-245

1.50" SQ x 7"

DB9-1-1-24R

D = 1.50" x 8.5" Long

DB9-1-1-32R

D = 2.00" x 8.5" Long

DB9-1-1-40R

D = 2.50" x 8.5" Long


3JHIU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF*O t$PVOUFS-$MPDLwJTF3PUBUJPO $$8

"/7*-40%3"/(& */4&354

8*%5) */$) o o o

"/7*-40%3"/(& o

*/4&354

0

$-".14

1DB1104

0.125

1DBA-3104

1DBA-3204

1DBA-3304

1DBA-3404

1DB1504

8*%5) */$) o 0.125

1DBA-3504

1DBA-3604

CR2-1-H04

1DB1105

0.156

1DBA-3105

1DBA-3205

1DBA-3305

1DBA-3405

1DB1505

0.156

1DBA-3505

1DBA-3605

1DB1106

0.187

1DBA-3106

1DBA-3206

1DBA-3306

1DBA-3406

1DB1506

0.187

1DBA-3506

1DBA-3606

1DB1108

0.250

1DBA-3108

1DBA-3208

1DBA-3308

1DBA-3408

1DB1508

0.250

1DBA-3508

1DBA-3608

CR2-1-H07

1DB1110

0.312

1DBA-3110

1DBA-3210

1DBA-3310

1DBA-3410

1DB1510

0.312

1DBA-3510

1DBA-3510

CR2-1-H09

1DB1112

0.375

1DBA-3112

1DBA-3212

1DBA-3312

1DBA-3412

1DB1512

0.375

1DBA-3512

1DBA-3512

CR2-1-H11

CR2-1-H06

3JHIU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF0VU t$MPDLwJTF3PUBUJPO $8

"/7*-40%3"/(& */4&354

16

8*%5) */$) o o o

"/7*-40%3"/(& o

*/4&354

8*%5) */$) o

0

$-".14 CR2-1-H04

1DB2104

0.125

1DBA-4104

1DBA-4204

1DBA-4304

1DBA-4404

1DB2504

0.125

1DBA-4504

1DBA-4604

1DB2105

0.156

1DBA-4105

1DBA-4205

1DBA-4305

1DBA-4405

1DB2505

0.156

1DBA-4505

1DBA-4605

1DB2106

0.187

1DBA-4106

1DBA-4206

1DBA-4306

1DBA-4406

1DB2506

0.187

1DBA-4506

1DBA-4606

1DB2108

0.250

1DBA-4108

1DBA-4208

1DBA-4308

1DBA-4408

1DB2508

0.250

1DBA-4508

1DBA-4608

CR2-1-H07

1DB2110

0.312

1DBA-4110

1DBA-4210

1DBA-4310

1DBA-4410

1DB2510

0.312

1DBA-4510

1DBA-4510

CR2-1-H09

1DB2112

0.375

1DBA-4112

1DBA-4212

1DBA-4312

1DBA-4412

1DB2512

0.375

1DBA-4512

1DBA-4512

CR2-1-H11 CR2-1-H11


CR2-1-H06





W 1.44”


R



DB7-1-1-16L

1" SQ x 6"

DB7-1-1-20L

1.25" SQ x 7"

DB7-1-1-24L

1.5" SQ x 7"

DB8-1-1-160

1"H x 1.25 W x 7"

DB8-1-1-200

1.25" SQ x 7"

DB8-1-1-240

1.50" SQ x 7"

DB9-1-1-24L

D = 1.50" x 8.5" Long

DB9-1-1-32L

D = 2.00" x 8.5" Long

DB9-1-1-40L

D = 2.50" x 8.5" Long


-FGU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF*Ot$MPDLwJTF3PUBUJPO $8

"/7*-40%3"/(& */4&354

8*%5) */$) o o o

"/7*-40%3"/(& o

*/4&354

0

$-".14

1DB5104

0.125

1DBA-7104

1DBA-7204

1DBA-7304

1DBA-7404

1DB5504

8*%5) */$) o 0.125

1DBA-7504

1DBA-7604

CL2-1-H04

1DB5105

0.156

1DBA-7105

1DBA-7205

1DBA-7305

1DBA-7405

1DB5505

0.156

1DBA-7505

1DBA-7605

1DB5106

0.187

1DBA-7106

1DBA-7206

1DBA-7306

1DBA-7406

1DB5506

0.187

1DBA-7506

1DBA-7606

1DB5108

0.250

1DBA-7108

1DBA-7208

1DBA-7308

1DBA-7408

1DB5508

0.250

1DBA-7508

1DBA-7608

CL2-1-H07

1DB5110

0.312

1DBA-7110

1DBA-7210

1DBA-7310

1DBA-7410

1DB5510

0.312

1DBA-7510

1DBA-7510

CL2-1-H09

1DB5112

0.375

1DBA-7112

1DBA-7212

1DBA-7312

1DBA-7412

1DB5512

0.375

1DBA-7512

1DBA-7512

CL2-1-H11

CL2-1-H06

-FGU)BOE"OWJMT 4VQQPSU#MBEFT t%FQUIt$VSWF0VU t$PVOUFS-$MPDLwJTF3PUBUJPO $$8

"/7*-40%3"/(& */4&354

8*%5) */$) o o o

"/7*-40%3"/(& o

*/4&354

8*%5) */$) o

0

$-".14 CL2-1-H04

1DB6104

0.125

1DBA-8104

1DBA-8204

1DBA-8304

1DBA-8404

1DB6504

0.125

1DBA-8504

1DBA-8604

1DB6105

0.156

1DBA-8105

1DBA-8205

1DBA-8305

1DBA-8405

1DB6505

0.156

1DBA-8505

1DBA-8605

1DB6106

0.187

1DBA-8106

1DBA-8206

1DBA-8306

1DBA-8406

1DB6506

0.187

1DBA-8506

1DBA-8606

1DB6108

0.250

1DBA-8108

1DBA-8208

1DBA-8308

1DBA-8408

1DB6508

0.250

1DBA-8508

1DBA-8608

CL2-1-H07

1DB6110

0.312

1DBA-8110

1DBA-8210

1DBA-8310

1DBA-8410

1DB6510

0.312

1DBA-8510

1DBA-8510

CL2-1-H09

1DB6112

0.375

1DBA-8112

1DBA-8212

1DBA-8312

1DBA-8412

1DB6512

0.375

1DBA-8512

1DBA-8512

CL2-1-H11

CL2-1-H06


17

GTH – HOG (HEAVY) GROOVING SYSTEM FACE GROOVING AND OD GROOVING OF EXTRA WIDE AND DEEP GROOVES DEPTH OF CUT UP TO 2.0" (50.8 mm) GTH - HOG is a heavy duty versatile system designed for high rate of material removal, roughing and finishing operations.

GTH-FG INSERTS


.250" (6.35 mm) - .500" (12.70 mm) WIDE All standard inserts come with .02" (0.51mm) RAD. (FACE GROOVING OD 6" DIA MINIMUM)

INSERT OPTIONS:

Carbide grades, chip breakers and coatings are stocked for applications based on work materials: Steels, Stainless Steels, Cast Irons, Aluminum, Composites. (For ordering designations see Page 4, or specify work material) END CUTTING (Square shank) INSERTS

WIDTH (INCH)

GROOVE DEPTH

GT250

.250"

2.0"

GTH-1-16-250RH

GT312

.312"

2.0"

GTH-1-16-312RH

GT375

.375"

2.0"

GTH-1-16-375RH

GT425

.425"

2.0"

GTH-2-20-425RH

GT475

.475"

2.0"

GTH-2-20-475RH

GT500

.500"

2.0"

GTH-2-20-500RH

HOLDER NO.

CLAMP

CLAMP SCREW

CL-20

CL-20S

CL-30

CL-30S

GTH-1-16-250RH

1.00" X 1.00" X 7" LONG

GTH-1-16-312RH

1.00" X 1.00" X 7" LONG

GTH-1-16-375RH

1.00" X 1.00" X 7" LONG

GTH-2-20-425RH

1.25" X 1.25" X 7" LONG

GTH-2-20-475RH

1.25" X 1.25" X 7" LONG

GTH-2-20-500RH

1.25" X 1.25" X 7" LONG

Holder bodies include clamp and clamp screw

GTH-FG INSERTS



INSERT OPTIONS:

Carbide grades, chip breakers and coatings are stocked for applications based on work materials: Steels, Stainless Steels, Cast Irons, Aluminum, Composites. (For ordering designations see Page 4, or specify work material END CUTTING (Square shank) INSERTS

WIDTH (INCH)

GROOVE DEPTH

HOLDER NO.

GT250

.250"

2.0"

GTH-1-16-250LH

GT312

.312"

2.0"

GTH-1-16-312LH

GT375

.375"

2.0"

GTH-1-16-375LH

GT425

.425"

2.0"

GTH-2-20-425LH

GT475

.475"

2.0"

GTH-2-20-475LH

GT500

.500"

2.0"

GTH-2-20-500LH

CLAMP

CL-20

CL-30

CLAMP SCREW

CL-20S

CL-30S

GTH-1-16-250LH

1.00" X 1.00" X 7" LONG

GTH-1-16-312LH

1.00" X 1.00" X 7" LONG

GTH-1-16-375LH

1.00" X 1.00" X 7" LONG

GTH-2-20-425LH

1.25" X 1.25" X 7" LONG

GTH-2-20-475LH

1.25" X 1.25" X 7" LONG

GTH-2-20-500LH

1.25" X 1.25" X 7" LONG


18

GTH – HOG (HEAVY) GROOVING SYSTEM FACE GROOVING AND OD GROOVING OF EXTRA WIDE AND DEEP GROOVES DEPTH OF CUT UP TO 2.5" (63.5 mm) GTH - HOG is a heavy duty versatile system designed for high rate of material removal, roughing and finishing operations.

GTH-FG INSERTS



INSERT OPTIONS:


WIDTH (INCH)

GROOVE DEPTH

GT562

.562"

2.5"

GTH-3-24-562RH

GT625

.625"

2.5"

GTH-3-24-625RH

GT750

.750"

2.5"

GTH-4-24-750RH

HOLDER NO.

CLAMP

CLAMP SCREW

CL-50

CL-50S

CL-62

CL-62S

GTH-3-24-562RH

1.50" X 1.50" X 8" LONG

GTH-3-24-625RH

1.50" X 1.50" X 8" LONG

GTH-4-24-750RH

1.50" X 1.50" X 8" LONG


GTH-FG INSERTS



INSERT OPTIONS:


WIDTH (INCH)

GROOVE DEPTH

GT562

.562"

2.5"

GTH-3-24-562LH

GT625

.625"

2.5"

GTH-3-24-625LH

GT750

.750"

2.5"

GTH-4-24-750LH

HOLDER NO.

CLAMP

CLAMP SCREW

GTH-3-24-562LH

1.50" X 1.50" X 8" LONG

CL-50

CL-50S

GTH-3-24-625LH

1.50" X 1.50" X 8" LONG

CL-62

CL-62S

GTH-4-24-750LH

1.50" X 1.50" X 8" LONG


19

GTH – DUCK FEET (EXTRA HEAVY) GROOVING SYSTEM FACE GROOVING AND OD GROOVING OF EXTRA WIDE AND DEEP GROOVES / ROUGHING DEPTH OF CUT UP TO 2.5" (63.5mm) GTH - DUCK FEET is a heavy duty versatile system designed for high rate of material removal. Excellent for roughing operations and chatter reduction in heavy cuts. GTH-DF INSERTS



INSERT OPTIONS:


WIDTH (INCH)

GROOVE DEPTH

GT-DF425

.425"

2.0"

GTH-2-20-425RH

GT-DF475

.475"

2.0"

GTH-2-20-475RH

GT-DF500

.500"

2.0"

GTH-2-20-500RH

GT-DF562

.562"

2.5"

GTH-3-24-562RH

GT-DF625

.625"

2.5"

GTH-3-24-625RH

GT-DF750

.750"

2.5"

GTH-4-24-750RH

HOLDER NO.

CLAMP

CL-30

CLAMP SCREW

CL-30S

GTH-2-20-425RH

1.25" X 1.25" X 7" LONG

GTH-2-20-475RH

1.25" X 1.25" X 7" LONG

GTH-2-20-500RH

1.25" X 1.25" X 7" LONG

GTH-3-24-562RH

1.50" X 1.50" X 8" LONG

CL-50

CL-50S

GTH-3-24-625RH

1.50" X 1.50" X 8" LONG

CL-62

CL-62S

GTH-4-24-750RH

1.50" X 1.50" X 8" LONG


GTH-DF INSERTS



INSERT OPTIONS:


WIDTH (INCH)

GROOVE DEPTH

GT-DF425

.425"

2.0"

GTH-2-20-425LH

GT-DF475

.475"

2.0"

GTH-2-20-475LH

GT-DF500

.500"

2.0"

GTH-2-20-500LH

GT-DF562

.562"

2.5"

GTH-3-24-562LH

GT-DF625

.625"

2.5"

GTH-3-24-625LH

GT-DF750

.750"

2.5"

GTH-4-24-750LH

HOLDER NO.

CLAMP

CL-30

CLAMP SCREW

CL-30S

GTH-2-20-425LH

1.25" X 1.25" X 7" LONG

GTH-2-20-475LH

1.25" X 1.25" X 7" LONG

GTH-2-20-500LH

1.25" X 1.25" X 7" LONG

GTH-3-24-562LH

1.50" X 1.50" X 8" LONG

CL-50

CL-50S

GTH-3-24-625LH

1.50" X 1.50" X 8" LONG

CL-62

CL-62S

GTH-4-24-750LH

1.50" X 1.50" X 8" LONG


20

GH SYSTEM – OD GROOVING EXTENDED LENGTH SHANKS - GROUP A Depth of cut: Up to .25" (6.35 mm) GH SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly with a support blade (anvil).

GI-OD-GH - ATLOCK INSERTS, DOUBLE ENDED



INSERT OPTIONS:


INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

ANVIL

HOLDER NO.

HOLDER NO.

HOLDER NO.

HOLDER NO.

GARO1

0.031

.125"

AR01

GH-16-1A-RH

GH-20-1A-RH

GH-24-1A-RH

GH-64-1A-RH

GARO2

0.062

.125"

AR02

GH-16-1A-RH

GH-20-1A-RH

GH-24-1A-RH

GH-64-1A-RH

GARO3

0.093

.187"

AR03

GH-16-1A-RH

GH-20-1A-RH

GH-24-1A-RH

GH-64-1A-RH

GARO4

0.125

.250"

AR04

GH-16-1A-RH

GH-20-1A-RH

GH-24-1A-RH

GH-64-1A-RH

Holder No. (Width x Height x Length)

1A

1A

GH-16-1A-RH

1" X 1" X 6" LONG

GH-20-1A-RH

1.25" X 1.25" X 6" LONG

GH-24-1A-RH

1.5" X 1.5" X 6" LONG

GH-64-1A-RH

.75" X 1"X 6" LONG

HOLDER BODIES INCLUDE CLAMP, CLAMP SCREWS AND ANVIL SCREWS SPARE PARTS: CLAMP (C1) • CLAMP SCREW (C1S) • ANVIL SCREW (AS2)


GI-OD-GH - ATLOCK INSERTS, DOUBLE ENDED .031" (0.78 mm) - .125" (3.18 mm) WIDE All standard inserts come with .008" (0.2 mm) RAD.

INSERT OPTIONS:


INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

ANVIL

HOLDER NO.

HOLDER NO.

HOLDER NO.

HOLDER NO.

GALO1

0.031

.125"

AL01

GH-16-1A-LH

GH-20-1A-LH

GH-24-1A-LH

GH-64-1A-LH

GALO2

0.062

.125"

AL02

GH-16-1A-LH

GH-20-1A-LH

GH-24-1A-LH

GH-64-1A-LH

GALO3

0.093

.187"

AL03

GH-16-1A-LH

GH-20-1A-LH

GH-24-1A-LH

GH-64-1A-LH

GALO4

0.125

.250"

AL04

GH-16-1A-LH

GH-20-1A-LH

GH-24-1A-LH

GH-64-1A-LH


1A

1A

GH-16-1A-LH

1" X 1" X 6" LONG

GH-20-1A-LH

1.25" X 1.25 X 6" LONG

GH-24-1A-LH

1.5" X 1.5" X 6" LONG

GH-64-1A-LH

.75" X 1"X 6" LONG


21

GH SYSTEM – OD GROOVING EXTENDED LENGTH SHANKS - GROUP B Depth of cut: Up to .25" (6.35 mm) GH SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly with a support blade (anvil).




INSERT OPTIONS:


INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

ANVIL

HOLDER NO.

HOLDER NO.

GARO1

0.031

.125"

BR01

GH-12-1B-RH

GH-43-1B-RH

GARO2

0.062

.125"

BR02

GH-12-1B-RH

GH-43-1B-RH

GARO3

0.093

.187"

BR03

GH-12-1B-RH

GH-43-1B-RH

GARO4

0.125

.250"

BR04

GH-12-1B-RH

GH-43-1B-RH

GARO5

0.156

.250"

BR05

GH-12-2B-RH

GH-43-2B-RH

GARO6

0.187

.250"

BR06

GH-12-2B-RH

GH-43-2B-RH

GARO7

0.218

.250"

BR07

GH-12-3B-RH

GARO8

0.250

.250"

BR08

GH-12-3B-RH

1B

Holder No. (Width x Height x Length) 1B

GH-12-1B-RH GH-43-1B-RH

.75" X .75" X 6" LONG .50" X .75" X 6" LONG

2B

GH-12-2B-RH GH-43-2B-RH

.75" X .75" X 6" LONG .50" X .75" X 6" LONG

3B

GH-12-3B-RH

.75" X .75" X 6" LONG

2B

HOLDER BODIES INCLUDE CLAMP, CLAMP SCREWS AND ANVIL SCREWS

3B

SPARE PARTS: CLAMP (C1) • CLAMP SCREW (C1S) • ANVIL SCREW (AS2)




INSERT OPTIONS:


22

INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

ANVIL

HOLDER NO.

HOLDER NO.

GALO1

0.031

.125"

BL01

GH-12-1B-LH

GH-43-1B-LH

GALO2

0.062

.125"

BL02

GH-12-1B-LH

GH-43-1B-LH

GALO3

0.093

.187"

BL03

GH-12-1B-LH

GH-43-1B-LH

GALO4

0.125

.250"

BL04

GH-12-1B-LH

GH-43-1B-LH

GALO5

0.156

.250"

BL05

GH-12-2B-LH

GH-43-2B-LH

GALO6

0.187

.250"

BL06

GH-12-2B-LH

GH-43-2B-LH

GALO7

0.218

.250"

BL07

GH-12-3B-LH

GALO8

0.250

.250"

BL08

GH-12-3B-LH

1B

Holder No. (Width x Height x Length) 1B

GH-12-1B-LH GH-43-1B-LH

.75" X .75" X 6" LONG .50" X .75" X 6" LONG

2B

GH-12-2B-LH GH-43-2B-LH

.75" X .75" X 6" LONG .50" X .75" X 6" LONG

3B

GH-12-3B-LH

.75" X .75" X 6" LONG

2B

HOLDER BODIES INCLUDE CLAMP, CLAMP SCREWS AND ANVIL SCREWS

3B


GH SYSTEM – OD GROOVING EXTENDED LENGTH SHANKS - GROUP C Depth of cut: Up to .375" (9.525 mm) GH SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly with a support blade (anvil).




INSERT OPTIONS:


INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

ANVIL

HOLDER NO.

HOLDER NO.

HOLDER NO.

HOLDER NO.

GCRO2

0.062

.375"

CR02

GH-16-1C-RH

GH-20-1C-RH

GH-24-1C-RH

GH-64-1C-RH

GCRO3

0.093

.375"

CR03

GH-16-1C-RH

GH-20-1C-RH

GH-24-1C-RH

GH-64-1C-RH

GCRO4

0.125

.375"

CR04

GH-16-1C-RH

GH-20-1C-RH

GH-24-1C-RH

GH-64-1C-RH


1C

GH-16-1C-RH

1" X 1 X 6" LONG

GH-20-1C-RH

1.25" X 1.25 X 6" LONG

GH-24-1C-RH

1.5" X 1.5 X 6" LONG

GH-64-1C-RH

.75" X 1X 6" LONG

1C



GI-OD-GH - ATLOCK INSERTS, DOUBLE ENDED .062" (1.57 mm) - .125" (3.18 mm) WIDE All standard inserts come with .008" (0.2 mm) RAD.

INSERT OPTIONS:


INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

ANVIL

HOLDER NO.

HOLDER NO.

HOLDER NO.

HOLDER NO.

GCLO2

0.062

.375"

CL02

GH-16-1C-LH

GH-20-1C-LH

GH-24-1C-LH

GH-64-1C-LH

GCLO3

0.093

.375"

CL03

GH-16-1C-LH

GH-20-1C-LH

GH-24-1C-LH

GH-64-1C-LH

GCLO4

0.125

.375"

CL04

GH-16-1C-LH

GH-20-1C-LH

GH-24-1C-LH

GH-64-1C-LH


1C

GH-16-1C-LH

1" X 1 X 6" LONG

GH-20-1C-LH

1.25" X 1.25 X 6" LONG

GH-24-1C-LH

1.5" X 1.5 X 6" LONG

GH-64-1C-LH

.75" X 1X 6" LONG

1C


23

M8 SYSTEM – OD GROOVING Depth of cut: Up to .25" (6.35 mm) M8 SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly with a support blade (anvil).

GI-OD-M8 - ATLOCK INSERTS, DOUBLE ENDED



INSERT OPTIONS:


INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

ANVIL

HOLDER NO.

HOLDER NO.

HOLDER NO.

GARO1

0.031

.125"

BR01

M8-R1-35

M8-R1-55

M8-R1-67

GARO2

0.062

.125"

BR02

M8-R1-35

M8-R1-55

M8-R1-67

GARO3

0.093

.187"

BR03

M8-R1-35

M8-R1-55

M8-R1-67

GARO4

0.125

.250"

BR04

M8-R1-35

M8-R1-55

M8-R1-67

GARO5

0.156

.250"

BR05

M8-R2-35

M8-R2-55

M8-R2-67

GARO6

0.187

.250"

BR06

M8-R2-35

M8-R2-55

M8-R2-67

GARO7

0.218

.250"

BR07

M8-R3-35

M8-R3-55

M8-R3-67

GARO8

0.250

.250"

BR08

M8-R3-35

M8-R3-55

M8-R3-67


1B

2B

1B

M8-R1-35 M8-R1-55 M8-R1-67

.50" X .375" X 3.4" LONG .50" X .50" X 3.4" LONG .75" X .625" X 3.4" LONG

2B

M8-R2-35 M8-R2-55 M8-R2-67


3B

M8-R3-35 M8-R3-55 M8-R3-67


HOLDER BODIES INCLUDE CLAMP, CLAMP SCREW AND ANVIL SCREWS

3B


GI-OD-M8 - ATLOCK INSERTS, DOUBLE ENDED .031" (0.78 mm) - .250" (6.35 mm) WIDE All standard inserts come with .008" (0.2 mm) RAD.

INSERT OPTIONS:


24

INSERTS

WIDTH (INCH)

MAX GROOVE DEPTH

ANVIL

HOLDER NO.

HOLDER NO.

HOLDER NO.

GALO1

0.031

.125"

BL01

M8-L1-35

M8-L1-55

M8-L1-67

GALO2

0.062

.125"

BL02

M8-L1-35

M8-L1-55

M8-L1-67

GALO3

0.093

.187"

BL03

M8-L1-35

M8-L1-55

M8-L1-67

GALO4

0.125

.250"

BL04

M8-L1-35

M8-L1-55

M8-L1-67

GALO5

0.156

.250"

BL05

M8-L2-35

M8-L2-55

M8-L2-67

GALO6

0.187

.250"

BL06

M8-L2-35

M8-L2-55

M8-L2-67

GALO7

0.218

.250"

BL07

M8-L3-35

M8-L3-55

M8-L3-67

GALO8

0.250

.250"

BL08

M8-L3-35

M8-L3-55

M8-L3-67


1B

2B

1B

M8-L1-35 M8-L1-55 M8-L1-67


2B

M8-L2-35 M8-L2-55 M8-L2-67


3B

M8-L3-35 M8-L3-55 M8-L3-67


HOLDER BODIES INCLUDE CLAMP, CLAMP SCREW AND ANVIL SCREWS

3B


NEW – MICRO ADJUSTABLE SYSTEM Face Grooving Applications

HOW TO ORDER HOLDER: o Cat ‘V’ o 40 o 50 o Other _____________________ o Straight Shank Diameter o 1.000" o 1.250" o 1.500" ( Straight Shank Option Valid Only Up To 3.5" O.D. Max) PART:

R

W

R

D

Type: o ‘A’ o ‘B’ o ‘C’

Major Diameter ________ ± ________ Minor Diameter ________ ± ________ Note: Should a family of parts be involved, please specify each diameter required. INSERT:

Width ____________ ± ____________ Groove Depth ________ ± ________ Corner Radii: Major Diameter ______________ Minor Diameter ______________ Chamfer Size _________________x 45°

Material to Machine ____________________________________

R

W

R C

D 45°

QUANTITY: Holders ______________ Inserts ______________

Figure ‘A’ Flat

Figure ‘B’ Counter Bore

Major Dia. Minor Dia.

Groove Depth

Figure ‘C’ Hub

Major Dia. Minor Dia.

Groove Width

C Bore Depth

Major Dia. Groove Width

Groove Depth

Minor Dia.

Groove Width

Groove Depth

25

DB SERIES – OD (External) Grooving System for Deep Grooves %FQUIPG$VU NN BOE NN

7#BTF*OTFSUQSPWJEFTNBYJNVNTUBCJMJUZBOESJHJEJUZJO4UBOEBSEBOE%FFQ(SPPWJOH"QQMJDBUJPOT %#0%%PH#POF4UZMF*OTFSUT %PVCMF&OEFE

W 1.125”

.125" (3.175 mm) – .375" (9.525 mm) Wide All standard inserts come with .008" (0.2 mm) RAD. R


%FQUIPG$VU6QUP NN

42)0-%&34

42)0-%&34

*/4&354

8*%5) */$)

"/7*-4

$-".14

"/7*-4

$-".14

DBOB04

0.125

R1D04

CR1-1-D04

R2D04

CR1-1-D04

DBOB05

0.156

R1D05

CR1-1-D05

R2D05

CR1-1-D05

DBOB06

0.187

R1D06

CR1-1-D06

R2D06

CR1-1-D06

DBOB07

0.218

DBOB08

0.250

R1D07

CR1-1-D07

R2D07

CR1-1-D07

R1D09

CR1-1-D09

R2D09

CR1-1-D09

DBOB09

0.281

DBOB10

0.312

DBOB11

0.343

DBOB12

0.375

R1D11

CR1-1-D11

R2D11

CR1-1-D11

4USBJHIU0%)PMEFS#PEZ0QUJPOT GPS3) 3JHIU)BOE


DB1-1-16R 1D

1.00" SQ x 6"

DB1-1-20R 2D

1.25" SQ x 7"

DB1-1-24R 2D

1.50" SQ x 7"


%FQUIPG$VU6QUP NN

42)0-%&34

26

42)0-%&34

*/4&354

8*%5) */$)

"/7*-4

$-".14

"/7*-4

$-".14

DBOB04

0.125

R1E04

CR1-1-E04

R2E04

CR1-1-E04

DBOB05

0.156

R1E05

CR1-1-E05

R2E05

CR1-1-E05

DBOB06

0.187

R1E06

CR1-1-E06

R2E06

CR1-1-E06

DBOB07

0.218

DBOB08

0.250

R1E07

CR1-1-E07

R2E07

CR1-1-E07

DBOB09

0.281

DBOB10

0.312

R1E09

CR1-1-E09

R2E09

CR1-1-E09

DBOB11

0.343

DBOB12

0.375

R1E11


CR1-1-E11

R2E11

CR1-1-E11



DB1-1-16R 1E

1.00" SQ x 6"

DB1-1-20R 2E

1.25" SQ x 7"

DB1-1-24R 2E

1.50" SQ x 7"




W 1.125”



%FQUIPG$VU6QUP NN

42)0-%&34

42)0-%&34

*/4&354

8*%5) */$)

"/7*-4

$-".14

"/7*-4

$-".14

DBOB04

0.125

L1D04

CL1-1-D04

L2D04

CL1-1-D04

DBOB05

0.156

L1D05

CL1-1-D05

L2D05

CL1-1-D05

DBOB06

0.187

L1D06

CL1-1-D06

L2D06

CL1-1-D06

DBOB07

0.218

DBOB08

0.250

L1D07

CL1-1-D07

L2D07

CL1-1-D07

DBOB09

0.281

DBOB10

0.312

L1D09

CL1-1-D09

L2D09

CL1-1-D09

DBOB11

0.343

DBOB12

0.375

L1D11

CL1-1-D11

L2D11

CL1-1-D11

4USBJHIU0%)PMEFS#PEZ0QUJPOT GPS-) -FGU)BOE


DB1-1-16L 1D

1.00" SQ x 6"

DB1-1-20L 2D

1.25" SQ x 7"

DB1-1-24L 2D

1.50" SQ x 7"


%FQUIPG$VU6QUP NN

42)0-%&34

42)0-%&34

*/4&354

8*%5) */$)

"/7*-4

$-".14

"/7*-4

$-".14

DBOB04

0.125

L1E04

CL1-1-E04

L2E04

CL1-1-E04

DBOB05

0.156

L1E05

CL1-1-E05

L2E05

CL1-1-E05

DBOB06

0.187

L1E06

CL1-1-E06

L2E06

CL1-1-E06

DBOB07

0.218

DBOB08

0.250

L1E07

CL1-1-E07

L2E07

CL1-1-E07

L1E09

CL1-1-E09

L2E09

CL1-1-E09

DBOB09

0.281

DBOB10

0.312

DBOB11

0.343

DBOB12

0.375

L1E11

CL1-1-E11

L2E11

CL1-1-E11

4USBJHIU0%)PMEFS#PEZ0QUJPOT GPS-) -FGU)BOE &/%$655*/( (Square Shank)

DB1-1-16L 1E

1.00" SQ x 6"

DB1-1-20L 2E

1.25" SQ x 7"

DB1-1-24L 2E

1.50" SQ x 7"



27



W 1.125”



%FQUIPG$VU6QUP NN

42)0-%&34

42)0-%&34

*/4&354

8*%5) */$)

"/7*-4

$-".14

"/7*-4

$-".14

DBOB04

0.125

L1D04

CL1-1-D04

L2D04

CL1-1-D04

DBOB05

0.156

L1D05

CL1-1-D05

L2D05

CL1-1-D05

DBOB06

0.187

L1D06

CL1-1-D06

L2D06

CL1-1-D06

DBOB07

0.218

DBOB08

0.250

L1D07

CL1-1-D07

L2D07

CL1-1-D07

DBOB09

0.281

DBOB10

0.312

L1D09

CL1-1-D09

L2D09

CL1-1-D09

DBOB11

0.343

DBOB12

0.375

L1D11

CL1-1-D11

L2D11

CL1-1-D11

3JHIU"OHMF0%)PMEFS#PEZ0QUJPOT GPS3) 3JHIU)BOE


DB2-1-160 1D

1" x 1.25" x 7" 1"

DB2-1-200 2D

1.25" SQ x 7"

DB2-1-240 2D

1.50" SQ x 7"


%FQUIPG$VU6QUP NN

42)0-%&34

28

42)0-%&34

*/4&354

8*%5) */$)

"/7*-4

$-".14

"/7*-4

$-".14

DBOB04

0.125

L1E04

CL1-1-E04

L2E04

CL1-1-E04

DBOB05

0.156

L1E05

CL1-1-E05

L2E05

CL1-1-E05

DBOB06

0.187

L1E06

CL1-1-E06

L2E06

CL1-1-E06

DBOB07

0.218

DBOB08

0.250

L1E07

CL1-1-E07

L2E07

CL1-1-E07

L1E09

CL1-1-E09

L2E09

CL1-1-E09

DBOB09

0.281

DBOB10

0.312

DBOB11

0.343

DBOB12

0.375

L1E11


CL1-1-E11

L2E11

CL1-1-E11



DB2-1-160 1E

1" x 1.25" x 7"

DB2-1-200 2E

1.25" SQ x 7"

DB2-1-240 2E

1.50" SQ x 7"




W 1.125”



%FQUIPG$VU6QUP NN

42)0-%&34

42)0-%&34

*/4&354

8*%5) */$)

"/*-*4

$-".14

"/7*-4

$-".14

DBOB04

0.125

R1D04

CR1-1-D04

R2D04

CR1-1-D04

DBOB05

0.156

R1D05

CR1-1-D05

R2D05

CR1-1-D05

DBOB06

0.187

R1D06

CR1-1-D06

R2D06

CR1-1-D06

DBOB07

0.218

DBOB08

0.250

R1D07

CR1-1-D07

R2D07

CR1-1-D07

R1D09

CR1-1-D09

R2D09

CR1-1-D09

DBOB09

0.281

DBOB10

0.312

DBOB11

0.343

DBOB12

0.375

R1D11

CR1-1-D11

R2D11

CR1-1-D11

3JHIU"OHMF0%)PMEFS#PEZ0QUJPOT GPS-) -FGU)BOE


DB2-1-165 1D

1" x 1.25" x 7"

DB2-1-205 2D

1.25" SQ x 7"

DB2-1-245 2D

1.50" SQ x 7"


%FQUIPG$VU6QUP NN

42)0-%&34

42)0-%&34

*/4&354

8*%5) */$)

"/7*-4

$-".14

"/7*-4

$-".14

DBOB04

0.125

R1E04

CR1-1-E04

R2E04

CR1-1-E04

DBOB05

0.156

R1E05

CR1-1-E05

R2E05

CR1-1-E05

DBOB06

0.187

R1E06

CR1-1-E06

R2E06

CR1-1-E06

DBOB07

0.218

DBOB08

0.250

R1E07

CR1-1-E07

R2E07

CR1-1-E07

DBOB09

0.281

DBOB10

0.312

R1E09

CR1-1-E09

R2E09

CR1-1-E09

DBOB11

0.343

DBOB12

0.375

R1E11

CL1-1-E11

R2E11

CR1-1-E11



DB2-1-165 1E

1" x 1.25" x 7"

DB2-1-205 2E

1.25" SQ x 7"

DB2-1-245 2E

1.50" SQ x 7"



29

DB SERIES – OD (External) Grooving System for Deep Grooves %FQUIPG$VU NN


W

1.510" 1.125”



%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

"/7*-4

$-".14 CR1-1-H04

DBOC04

0.125

R2H04

DBOC05

0.156

R2H05

DBOC06

0.187

R2H06

DBOC07

0.218

DBOC08

0.250

DBOC09

0.281

DBOC10

0.312

DBOC11

0.343

DBOC12

0.375

CR1-1-H06

R2H07

CR1-1-H07

R2H09

CR1-1-H09

R2H11

CR1-1-H11



DB1-1-20R 2H

1.25" SQ x 7"

DB1-1-24R 2H

1.50" SQ x 7"


%FQUIPG$VU6QUP NN

30

*/4&354

8*%5) */$)

"/7*-4

$-".14

DBOC04

0.125

L2H04

CL1-1-H04

DBOC05

0.156

L2H05

DBOC06

0.187

L2H06

DBOC07

0.218

DBOC08

0.250

DBOC09

0.281

DBOC10

0.312

DBOC11

0.343

DBOC12

0.375


CL1-1-H06

L2H07

CL1-1-H07

L2H09

CL1-1-H09

L2H11

CL1-1-H11

4USBJHIU0%)PMEFS#PEZ0QUJPOT GPS-) -FGU)BOE


DB1-1-20L 2H

1.25" SQ x 7"

DB1-1-24L 2H

1.50" SQ x 7"


DB SERIES – OD (External) Grooving System for Deep Grooves %FQUIPG$VU NN


W

1.510" 1.125”



%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

"/7*-4

$-".14

DBOC04

0.125

L2H04

CL2-1-H04

DBOC05

0.156

L2H05

DBOC06

0.187

L2H06

DBOC07

0.218

DBOC08

0.250

DBOC09

0.281

DBOC10

0.312

DBOC11

0.343

DBOC12

0.375

CL2-1-H06

L2H07

CL2-1-H07

L2H09

CL2-1-H09

L2H11

CL2-1-H11

"/7*-4

$-".14 CR2-1-H04



DB2-1-200 2H

1.25" SQ x 7"

DB2-1-240 2H

1.50" SQ x 7"


%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

DBOC04

0.125

R2H04

DBOC05

0.156

R2H05

DBOC06

0.187

R2H06

DBOC07

0.218

DBOC08

0.250

DBOC09

0.281

DBOC10

0.312

DBOC11

0.343

DBOC12

0.375

CR2-1-H06

R2H07

CR2-1-H07

R2H09

CR2-1-H09

R2H11

CR2-1-H11



DB2-1-205 2H

1.25" SQ x 7"

DB2-1-245 2H

1.50" SQ x 7"



31

D SYSTEM – ID GROOVING EXTENDED LENGTH SHANKS D SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly without a support blade (anvil) For 1.00" Dia. Bores and Larger. GI-ID-D - ATLOCK INSERTS, DOUBLE ENDED



Round bars

INSERT OPTIONS:


Bars for 1.0" Min Bore Dia.

Depth of cut: Up to .15" (3.81 mm) INSERTS STYLE “DE”

WIDTH (INCH)

MAX DEPTH

DEL01

0.031

.125"

DEL02

0.062

DEL03

0.093

DEL04

0.125

DEL05

0.156

DEL06

0.187

.15"

.15"

HOLDER NO.

MIN BORE DIA

D30-16-1

1.00"

D30-16-2

1.00"

WIDTH (INCH)

MAX DEPTH

DFL01

0.031

.125" .18"

DFL02

0.062

DFL03

0.093

DFL04

0.125

DFL05

0.156

DFL06

0.187

DFL07

0.218

DFL08

0.250

SHANK DIA = 1.00" X 7" LONG; NECK .81"

D30-16-2


Note: RH Bars use LH inserts

SPARE PARTS: CLAMP (C-1) • SCREW (C1B)

Depth of cut: Up to .218" (5.53 mm) INSERTS STYLE “DF”

D30-16-1

HOLDER OPTIONS FOR RH (Right Hand) HOLDER NO.

MIN BORE DIA

HOLDER NO.

MIN BORE DIA

D20-16-1

1.25"

D20-20-1

1.50"

Round bars


.218"

.218"

D20-16-2

1.25"

D20-20-2

1.50"

.218"

D20-16-3

1.25"

D20-20-3

1.50"

D20-16-1

SHANK DIA = 1.00" X 7"

D20-16-2


D20-16-3


Bars for 1.5" Min Bore Dia. D20-20-1


D20-20-2


D20-20-3




32

D SYSTEM – ID GROOVING EXTENDED LENGTH SHANKS D SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly without a support blade (anvil) For 1.00" Dia. Bores and Larger. GI-ID-D - ATLOCK INSERTS, DOUBLE ENDED



Round bars

INSERT OPTIONS:



Depth of cut: Up to .15" (3.81 mm) INSERTS STYLE “DE”

WIDTH (INCH)

MAX DEPTH

DER01

0.031

.125"

DER02

0.062

DER03

0.093

DER04

0.125

DER05

0.156

DER06

0.187

.15"

.15"

HOLDER NO.

MIN BORE DIA

D35-16-1

1.00"

D35-16-2

1.00"

WIDTH (INCH)

MAX DEPTH

DFR01

0.031

.125"

DFR02

0.062

.18"

DFR03

0.093

DFR04

0.125

DFR05

0.156

DFR06

0.187

DFR07

0.218

DFR08

0.250


D35-16-2


Note: LH Bars use RH inserts



Depth of cut: Up to .218" (5.53 mm) INSERTS STYLE “DF”

D35-16-1

HOLDER NO.

MIN BORE DIA

HOLDER NO.

MIN BORE DIA

D25-16-1

1.25"

D25-20-1

1.50"

Round bars


.218"

.218"

D25-16-2

1.25"

D25-20-2

1.50"

.218"

D25-16-3

1.25"

D25-20-3

1.50"

D25-16-1


D25-16-2


D25-16-3


Bars for 1.5" Min Bore Dia. D25-20-1


D25-20-2


D25-20-3




33

M12 SYSTEM – ID GROOVING

M12 SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly without a support blade (anvil) For .50" Dia. Bores and Larger.

GI-ID-M12 - ATLOCK INSERTS, SINGLE ENDED

HOLDER OPTIONS FOR RH (Right Hand) STYLE “D” Bars for .50" Min Bore Dia.


M2 Round bars

INSERT OPTIONS:

Carbide grades, chip breakers and coatings are stocked for applications based on work materials: Steels, Stainless Steels, Cast Irons, Aluminum, Composites. (For ordering designations see Page 4, or specify work material) Depth of cut: Up to .15" (3.81 mm) INSERTS STYLE “D”

WIDTH (INCH)

MLD01

0.031

MLD02

0.062

MLD03

0.093

MLD04

0.125

HOLDER NO.

MIN BORE DIA

M2-01-35D

DIA = .500" x 3.5 Long; Neck .312"

M2-01-36D

DIA = .625" x 3.5 Long; Neck .312"

M2-01-37D

DIA = .750" x 3.5 Long; Neck .312"

Note: RH Bars use LH inserts M2-01-XXD

.50"

SPARE PARTS: CLAMP (MCD) • SCREW (MSD)

GI-ID-M-12 - ATLOCK INSERTS, SINGLE ENDED

HOLDER OPTIONS FOR RH (Right Hand) STYLE “E” Bars for .688" Min Bore Dia.


M1 Round bars

INSERT OPTIONS:

Carbide grades, chip breakers and coatings are stocked for applications based on work materials: Steels, Stainless Steels, Cast Irons, Aluminum, Composites. (For ordering designations see Page 4, or specify work material) Depth of cut: Up to .15" (3.81 mm)

M1-01-05E

DIA = .500" x 3.5 Long

M1-01-06E

DIA = .625" x 3.5 Long

M1-02-05E

DIA = .500" x 3.5 Long DIA = .625" x 3.5 Long

INSERTS STYLE “E”

HOLDER NO.

SHANK DIA

MIN BORE DIA

M1-02-06E

WIDTH (INCH)

MLE01

0.031

M1-01-05E

.500"

.688"

M2 Round bars

MLE02

0.062

M1-01-06E

.625"

.812"

MLE03

0.093

M1-01-56E

.625"

.688"

MLE04

0.125

M1-01-57E

.750"

.688"

M2-01-56E

DIA = .625" x 3.5 Long; Neck .500"

M1-01-67E

.750"

.812"

M2-01-57E

DIA = .750" x 3.5 Long; Neck .500"

M2-02-06E

.500"

.688"

M2-01-67E

DIA = .625" x 3.5 Long; Neck .625"

M2-02-06E

.625"

.812"

M2-02-56E

DIA = .625" x 3.5 Long; Neck .500"

M2-02-56E

.625"

.688"

M2-02-57E

DIA = .750" x 3.5 Long; Neck .500"

M2-02-57E

.750"

.688"

M2-02-67E

DIA = .750" x 3.5 Long; Neck .625"

M2-02-67E

.750"

.812"

MLE05

MLE06

0.156

0.187


SPARE PARTS: CLAMP (MCE) • SCREW (MSE)

34


M12 SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly without a support blade (anvil) For .50" Dia. Bores and Larger. HOLDER OPTIONS FOR LH (Left Hand) STYLE “D” Bars for .50" Min Bore Dia.

GI-ID-M12 - ATLOCK INSERTS, SINGLE ENDED .031" (0.78 mm) - .125" (3.18 mm) WIDE All standard inserts come with .008" (0.2 mm) RAD.

M2 Round bars

INSERT OPTIONS:

Carbide grades, chip breakers and coatings are stocked for applications based on work materials: Steels, Stainless Steels, Cast Irons, Aluminum, Composites. (For ordering designations see Page 4, or specify work material) Depth of cut: Up to .15" (3.81 mm) INSERTS STYLE “D”

WIDTH (INCH)

MRD01

0.031

MRD02

0.062

MRD03

0.093

MRD04

0.125

HOLDER NO.

MIN BORE DIA

M2-51-35D

DIA = .500" x 3.5 Long; Neck .312"

M2-51-36D

DIA = .625" x 3.5 Long; Neck .312"

M2-51-37D

DIA = .750" x 3.5 Long; Neck .312"

Note: LH Bars use RH inserts M2-51-XXD

.50"

SPARE PARTS: CLAMP (MCD) • SCREW (MSD)

GI-ID-M-12 - ATLOCK INSERTS, SINGLE ENDED

HOLDER OPTIONS FOR LH (Left Hand) STYLE “E” Bars for .688" Min Bore Dia.


M1 Round bars

INSERT OPTIONS:


M1-51-05E

DIA = .500" x 3.5 Long

M1-51-06E

DIA = .625" x 3.5 Long

M1-52-05E

DIA = .500" x 3.5 Long

M1-52-06E

DIA = .625" x 3.5 Long

INSERTS STYLE “E”

WIDTH (INCH)

HOLDER NO.

SHANK DIA

MIN BORE DIA

MRE01

0.031

M1-51-05E

.500"

.688"

MRE02

0.062

M1-51-06E

.625"

.812"

MRE03

0.093

M1-51-56E

.625"

.688"

MRE04

0.125

M1-51-57E

.750"

.688"

M2-51-56E

DIA = .625" x 3.5 Long; Neck .500" DIA = .750" x 3.5 Long; Neck .500"

MRE05

0.156

MRE06

0.187

M2 Round bars

M1-51-67E

.750"

.812"

M2-51-57E

M2-52-06E

.500"

.688"

M2-51-67E

DIA = .625" x 3.5 Long; Neck .625"

M2-52-06E

.625"

.812"

M2-52-56E

DIA = .625" x 3.5 Long; Neck .500" DIA = .750" x 3.5 Long; Neck .500" DIA = .750" x 3.5 Long; Neck .625"

M2-52-56E

.625"

.688"

M2-52-57E

M2-52-57E

.750"

.688"

M2-52-67E

M2-52-67E

.750"

.812"


SPARE PARTS: CLAMP (MCE) • SCREW (MSE)

35


M12 SYSTEM offers a superior side locking dove-tail pocket fit, an extremely rigid assembly without a support blade (anvil) For 1.00" Dia. Bores and Larger.

GI-ID-M12 - ATLOCK INSERTS, DOUBLE ENDED

HOLDER OPTIONS FOR RH (Right Hand) STYLE “G” Bars for 1.00" Min Bore Dia.


M1 Round bars

INSERT OPTIONS:

Carbide grades, chip breakers and coatings are stocked for applications based on work materials: Steels, Stainless Steels, Cast Irons, Aluminum, Composites. (For ordering designations see Page 4, or specify work material) Depth of cut: Up to .218" (5.53 mm) INSERTS STYLE “G”

WIDTH (INCH)

MAX DEPTH

MLG01

0.031

.125"

MLG02

0.062

.125"

MLG03

0.093

.187"

MLG04

0.125

.218"

MLG05

0.156

.218"

MLG06

0.187

.218"

MLG07

0.218

MLG08

0.250

.218"

HOLDER NO.

MIN BORE DIA

M1-01-07G

DIA = .750" x 3.5 Long

M1-02-07G

DIA = .750" x 3.5 Long

M1-03-07G

DIA = .750" x 3.5 Long


M1-01-07G

1.00"

SPARE PARTS: CLAMP (C-1) • SCREW (MSG)

M1-02-07G

M1-03-07G

GI-ID-M12 - ATLOCK INSERTS, DOUBLE ENDED

HOLDER OPTIONS FOR LH (Left Hand) STYLE “G” Bars for 1.00" Min Bore Dia.


M1 Round bars

INSERT OPTIONS:


36

INSERTS STYLE “G”

WIDTH (INCH)

MAX DEPTH

MRG01

0.031

.125"

MRG02

0.062

.125"

MRG03

0.093

.187"

MRG04

0.125

.218"

MRG05

0.156

.218"

MRG06

0.187

.218"

MRG07

0.218

MRG08

0.250

.218"

HOLDER NO.

MIN BORE DIA

1.00"

M1-53-07G

DIA = .750" x 3.5 Long

M1-52-07G

DIA = .750" x 3.5 Long

M1-53-07G

DIA = .750" x 3.5 Long


M1-51-07G

M1-52-07G

M1-51-07G

SPARE PARTS: CLAMP (C-1) • SCREW (MSG)

DB SERIES – ID One Piece Bar Grooving System for Deep Grooves %FQUIPG$VU NN PS NN

Uniquely Economical One-Piece Holders for 1.25" (31.7mm)(31.7mm) Diameter Bores and Larger. 6OJRVFMZ&DPOPNJDBM0OF1JFDF)PMEFSTGPS %JBNFUFS#PSFTBOE-BSHFS %#*%%PH#POF4UZMF*OTFSUT %PVCMF&OEFE

W 1.125”



%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

)0-%&3 /6.#&3

DB1B04

0.125

DB4-1600 B04

DB4-2000 B04

DB4-2400 B04 CL1-1-D04

DB1B05

0.156

DB4-1600 B05

DB4-2000 B05

DB4-2400 B05

DB1B06

0.187

DB4-1600 B06

DB4-2000 B06

DB4-2400 B06

DB1B07

0.218

DB1B08

0.250

DB1B09

0.281

DB1B10

0.312

DB1B11

0.343

DB1B12

0.375

DB4-1600 B07

$-".1

CLRO2

)0-%&3 /6.#&3

DB4-2000 B07

$-".1

CLRO2

)0-%&3 /6.#&3

$-".14

CL1-1-D06

)PMEFS#PEZ0QUJPOTGPS 3) 3JHIU)BOE 3PVOE#BST

DB4-2400 B07 CL1-1-D07

.JO#PSF%JB NN

DB4-1600 BXX 1.00" Dia. x 7"

DB4-1600 B09

DB4-2000 B09

DB4-2400 B09 CL1-1-D09

.JO#PSF%JB NN

DB4-2000 BXX 1.25" Dia. x 10"

DB4-1600 B11

DB4-2000 B11

DB4-2400 B11 CL1-1-D11

.JO#PSF%JB NN

DB4-2400 BXX 1.50" Dia. x 10"

Holder Bodies include clamp and clamp screws.

%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

)0-%&3 /6.#&3

DB1B04

0.125

DB4-1600 C04

DB4-2000 C04

DB4-2400 C04 CL1-1-D04

DB1B05

0.156

DB4-1600 C05

DB4-2000 C05

DB4-2400 C05

DB1B06

0.187

DB4-1600 C06

DB4-2000 C06

DB4-2400 C06

DB1B07

0.218

DB1B08

0.250

DB1B09

0.281

DB1B10

0.312

DB1B11

0.343

DB1B12

0.375

DB4-1600 C07

$-".1

CLRO2

)0-%&3 /6.#&3

DB4-2000 C07

$-".1

CLRO2

)0-%&3 /6.#&3

$-".14

CL1-1-D06

)PMEFS#PEZ0QUJPOTGPS 3) 3JHIU)BOE 3PVOE#BST

DB4-2400 C07 CL1-1-D07

.JO#PSF%JB DB4-1600 CXX 1.00" Dia. x 7" 344 414NN

DB4-1600 C09

DB4-2000 C09

DB4-2400 C09 CL1-1-D09

.JO#PSF%JB DB4-2000 CXX 1.25" Dia. x 10" 594 40.49NN

DB4-1600 C11

DB4-2000 C11

DB4-2400 C11 CL1-1-D11



4QBSF1BSUT$MBNQ4DSFXTGPS%#%# %#4 t$MBNQ4DSFXTGPS%# %$4

37

DB SERIES – ID One Piece Bar Grooving System for Deep Grooves %FQUIPG$VU NN PS NN

6OJRVFMZ&DPOPNJDBM0OF1JFDF)PMEFSTGPS%JBNFUFS#PSFTBOE-BSHFS Uniquely Economical One-Piece Holders for 1.25" (31.7mm) Diameter Bores and Larger. %#*%%PH#POF4UZMF*OTFSUT %PVCMF&OEFE

W 1.125”



%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

)0-%&3 /6.#&3

DB1B04

0.125

DB4-1650 B04

$-".1

)0-%&3 /6.#&3

$-".1

DB4-2050 B04

)0-%&3 /6.#&3

DB4-2450 B04 CL1-1-D04

DB1B05

0.156

DB4-1650 B05

DB4-2050 B05

DB4-2450 B05

DB1B06

0.187

DB4-1650 B06

DB4-2050 B06

DB4-2450 B06

DB1B07

0.218

DB1B08

0.250

DB1B09

0.281

DB1B10

0.312

DB1B11

0.343

DB1B12

0.375

DB4-1650 B07

CLRO2

DB4-2050 B07

$-".14

CLRO2

CL1-1-D06

)PMEFS#PEZ0QUJPOTGPS -) -FGU)BOE 3PVOE#BST

DB4-2450 B07 CL1-1-D07

.JO#PSF%JB DB4-1650 BXX 1.00" Dia. x 7" 344 34.14NN

DB4-1650 B09

DB4-2050 B09

DB4-2450 B09 CL1-1-D09


DB4-1650 B11

DB4-2050 B11

DB4-2450 B11 CL1-1-D11



%FQUIPG$VU6QUP NN

38

*/4&354

8*%5) */$)

)0-%&3 /6.#&3

DB1B04

0.125

DB4-1650 C04

DB4-2050 C04

DB4-2450 B04 CL1-1-D04

DB1B05

0.156

DB4-1650 C05

DB4-2050 C05

DB4-2450 B05

DB1B06

0.187

DB4-1650 C06

DB4-2050 C06

DB4-2450 B06

DB1B07

0.218

DB1B08

0.250

DB1B09

0.281

DB1B10

0.312

DB1B11

0.343

DB1B12

0.375

DB4-1650 C07

$-".1

CLRO2

)0-%&3 /6.#&3

DB4-2050 C07

$-".1

CLRO2

)0-%&3 /6.#&3

$-".14

CL1-1-D06

)PMEFS#PEZ0QUJPOTGPS -) -FGU)BOE 3PVOE#BST

DB4-2450 B07 CL1-1-D07


DB4-1650 C09

DB4-2050 C09

DB4-2450 B09 CL1-1-D09


DB4-1650 C11

DB4-2050 C11

DB4-2450 B11 CL1-1-D11


4QBSF1BSUT$MBNQ4DSFXTGPS%#%# %#4 t$MBNQ4DSFXTGPS%# %$4


DB SERIES – ID DASH Holders for Deep Grooves %FQUIPG$VU NN PS NN

5PPM)PMEFSTXJUI3FQMBDFBCMF4VQQPSU#MBEFT "OWJMT

Tool Holders with Replaceable Support Blades (Anvils) For 2.095" (53.2 mm) Diameter Bores and Larger. %#*%%PH#POF4UZMF*OTFSUT %PVCMF&OEFE

W 1.125”



%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

"/7*-4

$-".14

DB1B04

0.125

L5C04

CL1-1-D04

DB1B05

0.156

L5C05

DB1B06

0.187

L5C06

DB1B07

0.218

DB1B08

0.250

DB1B09

0.281

DB1B10

0.312

DB1B11

0.343

DB1B12

0.375

L5C07 L5C09

CL1-1-D06 CL1-1-D07 CL1-1-D09

L5C11

CL1-1-D11

)PMEFS#PEZ0QUJPOTGPS 3) 3JHIU)BOE 3PVOE#BST .JO#PSF%JB NN

DB4-1-2805 1.75" Dia. x 10"

.JO#PSF%JB NN

DB4-1-3205 2.00" Dia. x 10."


%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

"/7*-4

$-".14

DB1B04

0.125

L5D04

CL1-1-D04

DB1B05

0.156

L5D05

DB1B06

0.187

L5D06

DB1B07

0.218

DB1B08

0.250

DB1B09

0.281

DB1B10

0.312

DB1B11

0.343

DB1B12

0.375


L5D07 L5D09 L5D11

CL1-1-D06 CL1-1-D07 CL1-1-D09 CL1-1-D11


DB4-1-2805 1.75" Dia. x 10"

.JO#PSF%JB NN

DB4-1-3205 2.00" Dia. x 10."


39

DB SERIES – ID DASH Holders for Deep Grooves %FQUIPG$VU NN PS NN

Tool Holders with Replaceable Support Blades (Anvils) For 2.095" (53.2 mm) Diameter Bores and Larger. 5PPM)PMEFSTXJUI3FQMBDFBCMF4VQQPSU#MBEFT "OWJMT

%#*%%PH#POF4UZMF*OTFSUT %PVCMF&OEFE

W 1.125”



%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

"/7*-4

$-".14

DB1B04

0.125

R5C04

CR1-1-D04

DB1B05

0.156

R5C05

DB1B06

0.187

R5C06

DB1B07

0.218

DB1B08

0.250

DB1B09

0.281

DB1B10

0.312

DB1B11

0.343

DB1B12

0.375

R5C07

CR1-1-D06 CR1-1-D07

R5C09

CR1-1-D09

R5C11

CR1-1-D11

)PMEFS#PEZ0QUJPOTGPS -) -FGU)BOE 3PVOE#BST .JO#PSF%JB NN

DB4-1-2855 1.75" Dia. x 10"

.JO#PSF%JB NN

DB4-1-3255 2.00" Dia. x 10."


%FQUIPG$VU6QUP NN

40

*/4&354

8*%5) */$)

"/7*-4

$-".14

DB1B04

0.125

R5D04

CR1-1-D04

DB1B05

0.156

R5D05

DB1B06

0.187

R5D06

DB1B07

0.218

DB1B08

0.250

DB1B09

0.281

DB1B10

0.312

DB1B11

0.343

DB1B12

0.375

R5D07 R5D09 R5D11

CR1-1-D06 CR1-1-D07 CR1-1-D09 CR1-1-D11


DB4-1-2855 1.75" Dia. x 10"

.JO#PSF%JB NN

DB4-1-3255 2.00" Dia. x 10."



DB SERIES – ID DASH Holders for Deep Grooves %FQUIPG$VU NN

Tool Holders with Replaceable Support Blades (Anvils) For 2.53" (64.3 mm) Diameter Bores and Larger. 5PPM)PMEFSTXJUI3FQMBDFBCMF4VQQPSU#MBEFT "OWJMT

%#*%%PH#POF4UZMF*OTFSUT %PVCMF&OEFE

W 1.125”



%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

"/7*-4

$-".14

DB1B04

0.125

L5E04

CL1-1-E04

DB1B05

0.156

L5E05

DB1B06

0.187

L5E06

DB1B07

0.218

DB1B08

0.250

DB1B09

0.281

DB1B10

0.312

DB1B11

0.343

DB1B12

0.375

L5E07

CL1-1-E06 CL1-1-E07

L5E09

CL1-1-E09

L5E11

CL1-1-E11


DB4-1-2805 1.75" Dia. x 10"

.JO#PSF%JB NN

DB4-1-3205 2.00" Dia. x 10."


%FQUIPG$VU6QUP NN

*/4&354

8*%5) */$)

"/7*-4

$-".14

DB1B04

0.125

R5E04

CR1-1-E04

DB1B05

0.156

R5E05

DB1B06

0.187

R5E06

DB1B07

0.218

DB1B08

0.250

DB1B09

0.281

DB1B10

0.312

DB1B11

0.343

DB1B12

0.375


R5E07 R5E09 R5E11

CR1-1-E06 CR1-1-E07 CR1-1-E09 CR1-1-E11


DB4-1-2855 1.75" Dia. x 10"

.JO#PSF%JB NN

DB4-1-3255 2.00" Dia. x 10."


41

HOW TO ORDER Grooving Applications

OD GROOVING Holder

Insert: Width __________ Groove Depth _________ Radii_____

Material to Machine ____________________________

Quantities: Holders _______________ Spare Anvils ___________ Inserts _______________

Straight L.H.

R.H. Right Angle

Clockwise

Rotation #2 Top Going

Series: o HG o GH o M8 o DB o GTH Size: (H x W x L) ____________or (Dia. x L) ___________

Top View Shown for all Holders

R.H. Groove Depth

Specify Spindle Rotation

C L Groove Width

Counter-Clockwise

o Right Angle o L.H.

Rotation #1 Top Coming

Type: o Straight o R.H.

L.H. Right Angle R.H.

L.H. Straight

ID GROOVING Holder Type: o Straight o Right Angle o R.H. o L.H. Series: o D o M12 o DB One Piece o DB Dash Size: (H x W x L) _____________or (Dia. x L) __________ Insert: Width __________ Groove Depth _________ Radii_____ Material to Machine ____________________________ Quantities: Holders _______________ Spare Anvils ___________ Inserts _______________

42

Bore Size

Bore Size Groove Width

Reach from End of Part

Groove Depth

Groove Depth

Reach from End of Part

Top View Shown for all Holders

Right Hand Shown Rotation #1 Top Coming Counter-Clockwise

Left Hand Shown Rotation #2 Top Going Clockwise

HOW TO ORDER Face Grooving Applications

Holder

Rotation #1 Holder Detail ____________________ Rotation #2 Holder Detail ____________________ Series:     o HG o M5 o DB o GTH o MICRO ADJUSTABLE (see page 25) Size (H x W x L) ____________________ Qualified: o Yes   o No Part Type:     o ‘A’     o ‘B’     o ‘C’ Major Diameter ____________ ± ____________ Minor Diameter ____________ ± ____________

Insert: Width ____________ Groove Depth ____________ Radii________

Material to Machine ____________________________________

Quantities: Holders _______________ Spare Anvils ___________ Inserts _______________ Submit Part Print or Operation Sketch (if available).

Top View

Rotation #1 Top Coming Counter-Clockwise

CL

Top View CL

CL

Part

Left Hand

Right Hand Left Hand

Right Hand

Detail #1

Detail #6

Detail #3 Top View CL

Part

CL

Rotation #2 Top Going Clockwise

Detail #8 Top View

CL

CL

CL

Left Hand Right Hand Left Hand

Detail #2

Right Hand

Detail #4

Detail #5

Use Right Hand Curve Out Insert and Anvil

Figure ‘A’ Flat Groove Depth

Groove Width

Minor Dia. Major Dia.

Detail #7

Use Left Hand Curve Out Insert and Anvil

Groove Depth

Groove Width

Figure ‘B’ Counter Bore

Figure ‘C’ Hub ‘C’ Bore Depth


Groove Depth

Groove Width


Contact us for special requirements.

43

44 Samples B-26

Samples B-27

Samples B-28

Samples B-29

Samples B-25

Samples B-24

PRODUCTS


Samples B-32

Samples B-33

Samples B-34

Samples B-35

Samples B-31

Samples B-30

PRODUCTS


45

Allied Tool Products 9334 North 107th Street Milwaukee, Wisconsin 53224-1121 • USA Phone: 800.558.5147 Local: 414.355.8280 Fax: 414.355.8297 www.atptools.com

GROOVING SOLUTIONS MADE SIMPLE - ATP Tools

Recommend Documents