continued – page 2 hammer-blow specifications 5 size# weight combined assembly lbs(kg) diameter of valve wheels assembly will fit in (cm) 2 14 (6.4) 7...
Technical Data Space SmartBattery Packs Type of unit High capacity SmartBattery Pack for Infusomat® Space, Perfusor® Space, SpaceCom and SpaceCover Comfort
• Coupling agent and solvent in household and industrial cleaners, grease and paint removers, metal cleaners, and hard surface cleaners
T E M P E R A T U R E & P R O C E S S I N S T R U M E N T S I N C Technical Information Data Bulletin Platinum 100 Ohms (Pt100) α 0.00385 Temp 0 1 2 3 4 5 6 7 8 9-•
General properties Test method Unit Value General properties Density DIN 53479 g/cm3 0,93 Molecular weight 106 g/mol > 5,0 Mechanical Properties Tensile modulus ISO
STUDY DATA . TECHNICAL CONFORMANCE GUIDE . Technical Specifications Document . This Document is incorporated by reference into the following . Guidance Document(s):
1.6000 Technical data General technical data construction Flange version piston diameter 30mm to 200mm stroke 50mm to 500mm thread size G 1/4, G 1/2 starting from
Castrol South Africa Technical Data Sheet CASTROL ICEMATIC SW RANGE DESCRIPTION: The Castrol Icematic SW range of lubricants is based on
Jan 1, 2004 ... EU Directive 2000/53/EC (ELV):. Yes. EU Directive 2003/96/EC (BFR):. Yes. EU Directive 2011/65/EU (ROHS II):. Yes. EU Directive 2012/19/EU (WEEE):. Yes. EU Directive 2015/863/EU: Yes. EU Directive Compliance: EU Directive 2003/11/ EC
EU Directive 2000/53/EC (ELV):. Yes. EU Directive 2003/96/EC (BFR):. Yes. EU Directive 2011/65/EU (ROHS II):. Yes. EU Directive 2012/19/EU (WEEE):. Yes. EU Directive 2015/863/EU: Yes. EU Directive Compliance: EU Directive 2003/11/ EC (BFR). EU CE Mar
Download SM24A-MA. Parameterisable damper actuator for adjusting air dampers in ventilation and air-conditioning systems in buildings. • Air damper size up to approx. 4 m2. • Torque 20 Nm. • Nominal voltage AC/DC 24 V. • Control: Modulating 4 .
EU Directive 2000/53/EC (ELV):. Yes. EU Directive 2003/96/EC (BFR):. Yes. EU Directive 2011/65/EU (ROHS II):. Yes. EU Directive 2012/19/EU (WEEE):. Yes. EU Directive 2015/863/EU: Yes. EU Directive Compliance: EU Directive 2003/11/ EC (BFR). EU CE Mar
Oct 1, 2005 ... Lay Length. 3 in. Print Legend: BELDEN 3106A E34972 3C22 SHIELDED (UL) CM OR PLTC SUN RES OR C(UL) CM --- FT4. Electrical Characteristics. Capacitance. Nom. Capacitance Conductor to Conductor Nom. Capacitance Conductor to Other Conduc
Title: GEOTHERMAL GROUT Technical Data Sheet Author: CETCO Drilling Products Subject: GEOTHERMAL GROUT is a specially blended high solids bentonite that can be mixed
Technical Data Sheet USES Cypermethrin is a synthetic pyrethroid insecticide used to control many pests, including moth pests of cotton, fruit and vegetable crops
13.2 General factor structure ... The data origin from an experiment investigating the effect of conductivity in the
Jan 1, 2004 ... 2018 Belden, Inc. All Rights Reserved. Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to ch
Technical Data Sheet Nov 2016 Page 1 Emer-Clad Facade® High performance water based decorative and protective facade coating Uses As a decorative and protective
MINI John Cooper Works Technical data (MotoringFile) ... Gearbox Fluid Replacement Capacity ltr Permanent Filling ... MINI John Cooper Works Clubman
Technical Data Industrial Computer and Monitor Specifications Bulletins 6177R, 6181P, 6181X, 6176M, 6186M, 6200M, 6200P, 6200T Topic Page Summary of Changes 2
48%. These data are based on material: body P235-265GH, sieve 1.4401. Additional materials are available upon request. Technical and design changes are permitted. 1. Dimensions are acc. to DIN EN 558-1 and flanges acc. to EN 1092-1. Tolerances in acc
Application Guide Hardtop XP Dry film thickness (DFT) measurement Wet film thickness (WFT) measurement and calculation Ventilation Coating loss Film thickness measurement
This document is for technical reference only and is not intended for use in developing a specification. Specification writers should contact Technical Director of
1/25 www.ni.com Technical Sales (866) 531-6285 [email protected] Last Revised: 2015-08-10 09:28:25.0 NI DIAdem Technical Data Management Software Application and Technology
Babbitt Chainwheels TECHNICAL DATA Inches (cm)
SELECTION OF CHAIN OPERATORS CHAIN OPERATOR NUMBER
WHEEL RIM OUTSIDE DIAMETER IN (CM)
USES CHAIN TRADE SIZE
WEIGHT/100FT LBS (KG)
(5.1-10.2)
0
4 (10.2)
2
10 (4.5)
(10.8-14.6)
1
5¾ (14.6)
1/0
17½ (7.9)
VALVE HANDWHEEL OUTSIDE DIAMETER RANGE, OUTSIDE IN (CM)
2 to 4 4¼ to 5¾ 6 to 7½
(15.2-19.1)
1½
7½ (19.1)
1/0
17½ (7.9)
7¾ to 9
(19.7-22.9)
2
9 (22.9)
1/0
17½ (7.9)
2½
12 (30.5)
4/0
30 (13.6)
9¼ to 12½
(23.5-31.8)
12¾ to 15½
3
15½ (39.4)
4/0
30 (13.6)
15¾ to 19
(40.0-48.3)
(32.4-39.4)
3½
18½ (46.9)
4/0
30 (13.6)
19¼ to 22
(48.9-55.9)
4
21½ (54.6)
5/0
35 (15.9)
22¼ to 26
(56.5-66.0)
4½
25¾ (65.4)
5/0
35 (15.9)
26¼ to 30
(66.7-76.2)
5
30 (76.2)
5/0
35 (15.9)
30 to 36
(76.2-91.4)
5**
30 (76.2)
5/0
35 (15.9)
**Special attachment clamps for 5 wheel will accommodate up to 36” valve handwheel.
CHAINWHEEL DIMENSIONS WHEEL SIZE # A – Overall Height IN (CM) B – Inner Bolt Circle C – Outer Bolt Circle D – Hub Opening (DIAM) E – Slot Size (WIDTH) F – Rear Opening G – Hub Depth (SHOULDER TO REAR)
H – Rim Thickness I – Overall Depth
0
1
1½
2
2½
3
3½
4
4½
5
4⅝
6⅜
7¾
10½
12½
15½
18½
21½
25¾
30¼
(11.75)
(16.19)
(19.69)
(26.67)
(31.75)
(39.37)
(46.99)
(54.61)
(65.41)
(76.84)
1½
2½
3½
4½
5½
8½
11½
11½
14½
18¾
(3.81)
(6.35)
(8.89)
(11.43)
(13.77)
(21.59)
(29.21)
(29.21)
(36.83)
(47.63)
1⅞
3½
5
(4.76)
(8.89)
(12.7)
6⅝
(16.83)
9¼
12⅜
(23.50)
(31.43)
15½ (39.37)
17¾
21¼
25¼
(45.08)
(53.98)
(65.14)
½
⅞
1
2⅛
2⅛
2⅛
3
3
3
3
(1.27)
(2.22)
(2.54)
(5.34)
(5.34)
(5.34)
(7.62)
(7.62)
(7.62)
(7.62)
1-5/16
⅜
⅜
⅜
7/16
7/16
7/16
⅝
⅝
⅝
(7.94)
(9.525)
(9.525)
(9.525)
(11.116)
(11.116)
(11.116)
(15.875)
(15.875)
(15.875)
3⅛
1½
1⅞
(3.81)
(4.763)
1⅛
1½
1-7/16
1⅜
1¾
1⅞
1⅞
1⅞
1⅞
2
(2.86)
(3.81)
(3.65)
(3.49)
(4.45)
(4.76)
(4.76)
(4.76)
(4.76)
(5.08)
(7.94)
3½
3½
(8.89)
(8.89)
4⅞
¾ (1.91)
(12.38)
4⅞
4⅝
4¾
(12.39)
(11.75)
(12.07)
⅞
1⅛
1⅛
1⅛
1¼
1¼
1¼
1½
1½
1½
(2.22)
(2.86)
(2.86)
(2.86)
(3.18)
(3.18)
(3.18)
(3.81)
(3.81)
(3.81)
1¾
2¼
2⅜
2⅜
2⅝
2⅝
3⅛
3⅛
3⅛
3⅛
(4.45)
(5.72)
(6.03)
(6.03)
(6.67)
(6.67)
(7.94)
(7.94)
(7.94)
(7.94)
*All dimensions are in IN (CM)”
Babbitt Chainwheels TECHNICAL DATA Inches (cm)
Continued – Page 2
HAMMER-BLOW SPECIFICATIONS SIZE#
WEIGHT COMBINED ASSEMBLY LBS(KG)
DIAMETER OF VALVE WHEELS ASSEMBLY WILL FIT IN (CM)
2
14
(6.4)
7¾ to 9
2½
21
(9.5)
9¼ to 12½
(19.7-22.9) (23.5-31.8)
3
31
(14.1)
12¾ to 15½
3½
43
(19.5)
15¾ to 19
(40.0-48.3)
(32.4-39.4)
4
58
(26.3)
19¼ to 22
(48.9-55.9)
4½
70
(31.7)
22¼ to 26
(56.5-66.0)
5
118
(53.5)
26¼ to 30
(66.7-76.2)
5½
118
(53.5)
30 to 36
(76.2-91.4)
*Chainwheel shall be made of (cast iron/ductile iron/aluminum/bronze). Rim shall contain as an integral part of the casting a groove into which the chain guide attaches. Chain guides shall be made of (ductile iron/aluminum/bronze). Chainwheels shall be adjustable and detachable, furnished complete with (steel/stainless steel) attachments sets for attachment of chainwheel to valve handwheel. Units shall be coated with (black enamel, galvanizing, “Teflon”, epoxy) to meet manufacturer’s specifications.
