This document refers to the previous StarWind Virtual SAN version. To view the document for the current version, please follow this link
StarWind iSCSI SAN & NAS: Configuring HA Shared Storage for vSphere October 2012
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere
TRADEMARKS “StarWind”, “StarWind Software”, and the StarWind and the StarWind Software logos are trademarks of StarWind Software which may be registered in some jurisdictions. All other trademarks are owned by their respective owners.
CHANGES The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, StarWind Software assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. StarWind Software reserves the right to make changes in the product design without reservation and without notification to its users.
TECHNICAL SUPPORT AND SERVICES If you have questions about installing or using this software, check this and other documents first - you will find answers to most of your questions on the Technical Papers webpage or in StarWind Forum. If you need further assistance, please contact us.
Copyright ©2008-2012 StarWind Software Inc. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of StarWind Software.
Page | 2
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere CONTENTS INTRODUCTION .................................................................................................................................... 4 CREATING AN HA DEVICE ..................................................................................................................... 5 CONFIGURING ESX SEVERS ................................................................................................................... 9 CONFIGURING THE ISCSI INITIATOR ....................................................................................................... 15 SETTING UP A DATASTORE ..................................................................................................................... 17 CONTACTS .......................................................................................................................................... 21
Page | 3
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere INTRODUCTION
Page | 4
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere CREATING AN HA DEVICE 1. Launch StarWind Management Console: Start -> All Programs -> StarWind Software -> StarWind. Note: The StarWind Console icon appears in the system tray, when the Console is running. To open StarWind Management Console, double-click the icon or right-click it and select Start Management Console from the shortcut menu. 2. Select the server you want to provide with the iSCSI target device from the Console tree. 3. Double-click the host to connect. 4. Click Add Device to create devices and targets on the server. 5. Add Device Wizard appears. Please, follow the wizard's steps to complete creation of a new HA device. 6. Go to High Availability Device to select an HA device type. 7. Click Add to add a new host. Enter authentication and host information in the Specify Host dialog.
8. Click Next to continue. 9. Specify corresponding information in the Target Alias and Target Name text fields. Note: The name must be unique. Under this name the device is declared to the iSCSI initiators connecting to the StarWind Service over an IP network.
Page | 5
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 10. Click to specify name and location of an HA virtual disk on the server. If you want to create new virtual disks, select the Create New checkbox.
11. Click Next to continue.
Page | 6
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 12. Configure data synchronization and heartbeat channel parameters.
13. Click Next to continue. 14. Specify cache parameters of the HA device.
15. Click Next to continue.
Page | 7
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 16. Select an initialization method of the HA device.
17. Click Next to continue. 18. Check whether device parameters are correct. Click Back to make any changes. 19. Click Next to continue. 20. Click Finish to close the wizard.
Page | 8
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere CONFIGURING ESX SEVERS 1. Launch VMware vSphere Client: Start -> All Programs -> VMware -> VMware vSphere Client. 2. Specify IP address of a VMware vCenter Server, enter your login and password.
3. Click Login to enter. 4. Click the Hosts and Clusters icon from the Inventory panel of the vSphere Client window. 5. Right-click an existing datacenter and select New Cluster. If needed, click New Datacenter to create a new datacenter previously. 6. New Cluster Wizard appears. Specify a name of the cluster.
Page | 9
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 7. Continue to click Next until the wizard can be closed. 8. Right-click the cluster to add a host. Select the Add Host. 9. Add Host Wizard appears. Specify a host name or IP address, enter username and password.
10. Click Next to continue. 11. Check whether everything is correct, and click Next to continue. 12. Assign the license key to the host. 13. Click Next to continue. 14. Click Finish to close the wizard. 15. Follow the same procedure for another host. 16. Select a host.
Page | 10
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 17. Select the Configuration tab and choose the Networking item from the Hardware pane.
18. Click Add Networking. 19. Add Network Wizard appears. Select the VMkernel option.
20. Click Next to continue.
Page | 11
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 21. Select Create a vSphere standard switch, and select the appropriate network card checkbox.
22. Click Next to continue. 23. Select the Use this port group for vMotion and Use this port group for management traffic options.
24. Click Next to continue.
Page | 12
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 25. Specify IP settings in the relative text fields.
26. Click Next. 27. Click Finish to close the wizard. 28. Follow the same procedure to create the second VMkernel of the third vSwitch.
Page | 13
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 29. Follow the same procedure for another host in the cluster.
Page | 14
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere Configuring the iSCSI Initiator 1. Select a host. 2. Click the Configuration tab and select the Storage Adapters item from the Hardware pane. 3. Click Add and select Add software iSCSI Adapter. Click OK.
4. The list of the available storage adapters appears. Select iSCSI Software Adapter.
5. Click the Properties link. 6. Switch to the Dynamic Discovery tab.
Page | 15
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 7. Add each of the StarWind servers by clicking Add and specifying server IP address.
8. Click Close. When prompted to rescan for new iSCSI LUNs, click Yes.
9. Follow the same procedure for another cluster host.
Page | 16
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere Setting Up a Datastore 1. Select a host from the Console tree. 2. Click the Configuration tab and select the Storage item from the Hardware pane.
3. Click Add Storage. 4. The Add Storage window appears. Select Disk/LUN storage type.
5. Click Next to continue.
Page | 17
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 6. Select the device.
7. Click Next to continue. 8. Review the current disk layout. 9. Click Next to continue. 10. Enter a datastore name in the appropriate text field.
12. Click Next to continue. 13. Set the Disk/LUN formatting options.
Page | 18
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 14. Click Next to continue. 15. Check whether the device parameters are correct and click Back to make any changes.
16. Click Finish to close the wizard. 17. If everything has been done correctly, a new datastore appears.
18. Check another host for a new datastore. If a new datastore is not displayed in a datastore list, click Rescan All.
Page | 19
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere 19. Follow the same procedure for another storage device. If everything has been done correctly, a new datastore appears.
20. To add HA feature right-click the cluster and select Edit Settings. 21. In the Cluster Settings window select the Turn on vSphere HA checkbox.
22. Click OK.
Page | 20
StarWind iSCSI SAN & NAS : Configuring HA Shared Storage for vSphere CONTACTS
Customer Support Portal: Support Forum: Sales: Sales (Germany): General Information:
http://www.starwindsoftware.com/support http://www.starwindsoftware.com/forums
[email protected] [email protected] [email protected]
US Headquarters Phone: Fax:
1-617-449-7717 1-617-507-5845
EMEA and APAC Phone: Voice Mail: Germany Phone:
+44-0-2071936727 +44-0-2071936350 +33-0-977197857 (French) 1-866-790-2646 Monikastr. 13 53757 Sankt Augustin +49-1715109103
StarWind Software Inc. 40 Mall Rd., Burlington, MA 01803, USA www.starwindsoftware.com
Page | 21
