87A-500 SERIES Alloy 20 ASME Class 150 Flanged Full Port Ball Valve - 1/2” through 1” For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
PART (1/2” & 3/4” VALVES) Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lockwasher Grounding Spring Grounding Spring PART (1” VALVES) Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring Grounding Spring
OPTIONS AVAILABLE: (More information in Section J)
MATERIAL ASTM A351 CN7M ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/ Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel MATERIAL ASTM A351 CN7M ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS Inconel (not shown)
• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX) OPTION -01 Standard Configuration -042.25” Stem Extension (Carbon Steel, Zinc Plated) -14Side Vented Ball (Uni-Directional) -15Wheel Handle, Steel -21UHMWPE Seats -24Fire Safe (Graphite Packing and Seal) -35PTFE Seats and Seals -38PEEK Seats and Graphite Packing -49No Lubrication. Assembled Dry. -57Oxygen Cleaned -65MPTFE Seats and Graphite Packing (Fire Safe) -69Drilled and Tapped Purge Port with Plugs -704” Extended Bonnet -73Alloy 20 Spiral Wound Gaskets w/PTFE Filler -74Alloy 20 Spiral Wound Gaskets w/Graphite Filler -76Live Loaded (Lever) -77Live Loaded (Gear, Actuator) -80Multi-Seal (Super TFE) -82Flat Face Flanges -90Double Packed 4” Extended Bonnet -9PDouble Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound -EPGraphite Gasket (Fire Safe by Design) -KFPCTFE Stem Bearing -MPPositive Material Identification -TCWith Test Certificate -TDTested to API Spec 6D
1” Valve
1/2” & 3/4” Valves
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-16, GRAPH NO. 18 PRODUCT NUMBER 87A-503-01 87A-504-01 87A-505-01
SIZE
A
B
C
D
E
F
G
H
1/2” 3/4” 1”
0.50 0.75 1.00
4.25 4.62 5.00
2.06 2.18 2.32
3.31 3.89 4.62
5.11 5.53 6.53
0.30 0.36 0.47
1.09 1.65 1.62
1.41 1.99 2.15
D-92 REV. 12APR16
www.apollovalves.com
I
J
K
L
1.000 1.392 1.392
0.500 0.696 0.696
0.375 0.500 0.500
0.245 0.287 0.287
M 10-24 1/4-20 1/4-20
Customer Service (704) 841-6000
WT. 5 6 7
87A-500 SERIES Alloy 20 ASME Class 150 Flanged Full Port Ball Valve - 1.5” through 2.5” For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST 1 2
PART Body Retainer
3
Ball
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher Grounding Spring
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX) OPTION -01 Standard Configuration -042.25” Stem Extension (Carbon Steel, Zinc Plated) -14Side Vented Ball (Uni-Directional) -21UHMWPE Seats -24Fire Safe (Graphite Packing and Seal) -35PTFE Seats and Seals -38PEEK Seats and Graphite Packing (3” Only) -49No Lubrication. Assembled Dry. -57Oxygen Cleaned -65MPTFE Seats and Graphite Packing (Fire Safe) -69Drilled and Tapped Purge Ports with Plugs -704” Extended Bonnet -73Alloy 20 Spiral Wound Gaskets w/PTFE Filler -74Alloy 20 Spiral Wound Gaskets w/Graphite Filler -76Live Loaded (Lever) -77Live Loaded (Gear, Actuator) -80Multi-Seal (Super TFE) -82Flat Face Flanges -90Double Packed 4” Extended Bonnet -9PDouble Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound -EPGraphite Gasket (Fire Safe by Design) -KFPCTFE Stem Bearing -MGGear Operator with Standard Handwheel -MHGear Operator with Standard Handwheel & Locking Device -MJGear Operator with Oversize Handwheel -MKGear Operator with Oversize Handwheel & Locking Device -MPPositive Material Identification -TCWith Test Certificate -TDTested to API Spec 6D
MATERIAL ASTM A351 CN7M ASTM A351 CN7M ASTM B473 (UNS N08020) or A351 CN7M ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Inconel (not shown)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-16, GRAPH NO. 18 PRODUCT NUMBER 87A-507-01 87A-508-01 87A-509-01
SIZE
A
B
C
D
E
F
G
H
1.5” 2” 2.5”
1.50 2.00 2.50
6.50 7.00 7.50
3.00 3.04 3.34
4.62 5.61 6.24
6.65 8.41 8.41
0.72 0.80 0.80
2.41 3.31 3.94
3.09 4.08 4.71
I
J
K
L
M
WT.
1.949 1.949 1.949
0.974 0.974 0.974
0.625 0.750 0.750
0.412 0.477 0.477
5/16-18 5/16-18 5/16-18
14 25 30
REV. 12APR16 Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-93
87A-500 SERIES Alloy 20 ASME Class 150 Flanged Full Port Ball Valve - 3” through 6” For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3.
STANDARD MATERIAL LIST 1 2
PART Body Retainer
3
Ball
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle Grounding Spring
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX) OPTION -01 Standard Configuration -14Side Vented Ball (Uni-Directional) -21UHMWPE Seats -24Fire Safe (Graphite Packing and Seal) -35PTFE Seats and Seals -38PEEK Seats and Graphite Packing -49No Lubrication. Assembled Dry. -57Oxygen Cleaned -65MPTFE Seats and Graphite Packing (Fire Safe) -69Drilled and Tapped Purge Ports with Plugs -70Extended Bonnet -73Alloy 20 Spiral Wound Gaskets w/PTFE Filler -74Alloy 20 Spiral Wound Gaskets w/Graphite Filler -76Live Loaded (Lever) -77Live Loaded (Gear, Actuator) -80Multi-Seal (Super TFE) -82Flat Face Flanges -90Double Packed 4” Extended Bonnet -9PDouble Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound -EPGraphite Gasket (Fire Safe by Design) -KFPCTFE Stem Bearing -MGGear Operator with Standard Handwheel -MHGear Operator with Standard Handwheel & Locking Device -MJGear Operator with Oversize Handwheel -MKGear Operator with Oversize Handwheel & Locking Device -MPPositive Material Identification -TCWith Test Certificate -TDTested to API Spec 6D
MATERIAL ASTM A351 CN7M ASTM A351 CN7M ASTM B473 (UNS N08020 or A351 CN7M) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown) Inconel (not shown)
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-16, GRAPH NO. 18
PRODUCT NUMBER 87A-500-01 87A-50A-01 87A-50C-01
SIZE
A
3” 4” 6”
3.00 4.00 6.00
D-94 REV. 12APR16
B 8.00 9.00 15.50
C 3.68 3.94 7.19
D 8.80 9.99 13.73
E
F
G
H
3.88 5.13 7.00
0.50 0.50 1.00
4.75 5.94 7.75
5.95 7.13 9.48
www.apollovalves.com
I
J
K
L
2.840 2.840 4.596
1.420 1.420 2.298
1.250 1.250 2.000
0.725 0.725 1.375
M 3/8-16 3/8-16 3/4-10
Customer Service (704) 841-6000
WT. 60 91 248
ASME FLANGED BALL VALVES Features and Benefits 87A, 87A-F, 87B, 88A, 88A-F, 88B, 88L, & 88L-F Series
STANDARDS COMPLIANCE: Except where specifically noted all valves within this family of products complies with the requirements of this listed standard. ASME B16.5 ASME B16.10 ASME B16.34 ASME B16.33 ASME B16.38 ASME B31.1 ASME B31.3 ASME B31.8 API 607 API 608 MSS SP-25 MSS SP-61 MSS SP-72 UL 125 NSF/ANSI 61 NSF-372
”Pipe Flanges and Flanged Fittings” ”Face to Face Dimensions of Valves” ”Valves - Flanged, Threaded, and Welding End” “Manual Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig” “Large Metallic Valves for Gas Distribution (Manually Operated NPS 2.5” to 12”, 125 psig)” “Power Piping” “Chemical Plant and Petroleum Refinery Piping” “Gas Transmission and Distribution Piping Systems” ”Fire Test - Soft Seated Quarter Turn Valves” (-24 Option Required). See specific tech sheet for 5th or 6th edition. ”Ball Valves - Flanged, Threaded, and Welding End” ”Standard Marking System for Valves” ”Pressure Testing of Steel Valves” ”Ball Valves with Flanged or Buttweld Ends” “Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief )” Section 8, Annex G (1/2” to 4” 87A Series) Drinking Water System Components - Lead Content (1/2” to 4” 87A Series)
STANDARD FEATURES: Except where specifically noted all valves within this family of products include all listed features as standard.
• • • • • • • • • • • •
Two Position Locking Device (Valves 6” Full Port, 8” Standard Port and smaller) Chevron Style Adjustable Stem Seals ISO 5211 Mounting Pad Bolt Pattern Slot Vented Ball for Thermal Expansion Rated up to 150 psig Saturated Steam - ASME Class 150, 300, & 600 Valves Rated up to 250 psig Saturated Steam - ASME Class 300 Valves Require the -65 Option - ASME Class 600 Valves Require the -24-80 Options or -38 Option Anti-static Grounded Ball and Stem Blow-out Proof Stem Design Cast Boss for Bleed / Drain Port Vacuum Service to 29 inches of Hg NACE MR0175 (2000) Compliance on all 87A/87B/88A/88B/88L Valves with SS Ball & Stem NACE MR0103 (2003) Compliance on all 87A/87B/88A/88B/88L Valves with SS Ball & Stem
PRODUCT APPROVALS: CSA* UL*
(Reference: ASME B16.33 & B16.38) ASME Class 150 & 300 only (Reference: Control Number 195H) ASME Class 150 & 300 only UL (YSDT) LP-Gas Shut-Off Valves UL (MHKZ) Manual Valves UL (YRBX) Flammable Liquid Shut-Off Valves UL (YRPV) Gas Shut-Off Valves UL (YQNZ) Compressed Gas Shut-Off Valves UL (YQAR) Anhydrous Ammonia Shut-Off Valves
* Requires “UL” suffix for markings.
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
D-3
ASME FLANGED BALL VALVES 87A, 87B, 88A, 88B, & 88L Series VARIATIONS AVAILABLE: REFERENCE DATA:
ALLOY SERIES FLANGED BALL VALVES STAINLESS * ALLOY 20 STEEL HASTELLOY 87A-10X 87A-40X 87H-1HX
* NICKEL 87N-1NX
* NI-CU 87M-13X
SIZE
PORT
ANSI CLASS
1.5” & 2”
Standard
150
DIMENSIONAL DATA PAGE D-1
2.5” & 3”
Standard
150
D-2
87A-10X
87A-40X
87H-1HX
87N-1NX
N/A
4”, 6” & 8”
Standard
150
D-3
87A-10X
87A-40X
87H-1HX
87N-1NX
N/A
10”
Standard
150
D-4
87A-10X
87A-40X
87H-1HX
87N-1NX
N/A
1/2”, 3/4” & 1”
Full
150
D-5
87A-20X
87A-50X
87H-2HX
87N-2NX
87M-23X
1.5”, 2” & 2.5”
Full
150
D-6
87A-20X
87A-50X
87H-2HX
87N-2NX
87M-23X
3”, 4”, & 6”
Full
150
D-7
87A-20X
87A-50X
87H-2HX
87N-2NX
N/A
8”, 10” & 12”
Full
150
D-8
87A-20X
87A-50X
87H-2HX
87N-2NX
N/A
1.5” & 2”
Standard
300
D-9
87A-70X
87A-80X
87H-7HX
87N-7NX
N/A
2.5” & 3”
Standard
300
D-10
87A-70X
87A-80X
87H-7HX
87N-7NX
N/A
4”, 6” & 8”
Standard
300
D-11
87A-70X
87A-80X
87H-7HX
87N-7NX
N/A
10”
Standard
300
D-12
87A-70X
87A-80X
87H-7HX
87N-7NX
N/A
1/2”, 3/4” & 1”
Full
300
D-13
87A-90X
87A-60X
87H-9HX
87N-9NX
87M-93X
1.5”, 2” & 2.5”
Full
300
D-14
87A-90X
87A-60X
87H-9HX
87N-9NX
87M-93X
3”, 4”, & 6”
Full
300
D-15
87A-90X
87A-60X
87H-9HX
87N-9NX
N/A
8”, 10” & 12”
Full
300
D-16
87A-90X
87A-60X
87H-9HX
87N-9NX
N/A
* Minimum Quantities May Apply
ALLOY MATERIAL OF CONSTRUCTION FOR PRESSURE CONTAINING / RETAINING COMPONENTS: ALLOY Valve Series Body Retainer Ball Stem Fasteners
STAINLESS STEEL
ALLOY 20
HASTELLOY*
NICKEL*
NI-CU ALLOY*
87A-100/200,
87A-400/500,
87H-1H0/2H0,
87N-1N0/2N0,
87M-130/230,
87A-700/900
87A-600/800
87H-7H0/9H0
87N-7N0/9N0
87M-730/930
A351-CF8M
A351-CN7M
A494-CW12MW
A494-CZ100
A494-M35-1
A351-CF8M or
A351-CN7M or
A494-CW12MW
A494-CZ100 or
A494-M35-1 or
A276-316
B473-N08020
or B574-C276
B160-200
B164-K400
A351-CF8M or
A351-CN7M or
A494-CW12MW
A494-CZ100 or
A494-M35-1 or
A276-316
B473-N08020
or B574-C276
B160-200
B164-K400
A276-316
B473-N08020
B574-C276
B160-200
B164-K400
A193-B8M,
A193-B8M,
A193-B8M,
A193-B8M,
A193-B8M,
A194-Gr8
A194-Gr8
A194-Gr8
A194-Gr8
A194-Gr8
* Minimum Quantities May Apply
D-4
www.apollovalves.com
Customer Service (704) 841-6000
FLOW DATA For Apollo® Ball Valves The listed Cv “factors” are derived from actual flow testing, in the Apollo® Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina. These tests were completed using standard “off the shelf” valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/ connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing.
FLOW OF LIQUID
Q = CV
√
FLOW OF GAS
∆P SpGr
2 (Q) (SpGr) or ∆P = (Cv)2
Where: Q = ΔP = SpGr = Cv =
Q = 1360 CV
√
(∆P) (P2) (SpGr) (T)
-7 2 5.4 x 10 (SpGr) (T) (Q) or ∆P = (Cv)2 (P2)
Where: Q = ΔP = SpGr = P2 = T = Cv =
flow in US gpm pressure drop (psig) specific gravity at flowing temperature valve constant
flow in SCFH pressure drop (psig) specific gravity (based on air = 1.0) outlet pressure–psia (psig + 14.7) (temp. °F + 460) valve constant
CAUTION: The gas equation shown, is valid at very low pressure drop ratios. The gas equation is NOT valid when the ratio of pressure drop (ΔP) to inlet pressure (P1) exceeds 0.02. NOTE: Only use the gas equation shown if (P1-P2)/P1 is less than 0.02.
Cv FACTORS FOR APOLLO VALVES VALVE 70B-140 Series 70-100/200 Series 70-300/400 Series 70-600 Series 70-800 Series 71-AR Series 71-100/200 Series 72-100/900 Series 73A-100 Series 73-300/400 Series 74-100 Series 75-100 Series 76-AR Series 76F-100 Series 76FJ-100 Series 76FK-100 Series 76-100 Series 76-300/400 Series 76-600 Series 76J-100 Series 76J-AR Series 76K-100 Series 76K-AR Series 7K-100 Series 77-AR Series 77C-100/200 Series 77D-140 Series
1/4 8.4 8.4 -2.3 8.4 ---8.4 -8.4 8.4 8.4 8.1 8.1 8.1 8.4 -2.3 8.4 8.4 8.4 8.4 -8.1 4.5 4.5
3/8 7.2 7.2 -4.5 7.2 ---7.2 -7.2 7.2 7.2 15 15 15 7.2 -4.5 7.2 7.2 7.2 7.2 -15 7.2 7.2
1/2 15 15 15 5.4 15 --26 15 26 15 15 15 15 15 15 15 26 5.4 15 15 15 15 15 15 16 16
3/4 30 30 30 12 30 30 30 48 30 48 30 30 30 51 51 51 30 48 12 30 30 30 30 51 51 36 36
1 43 43 43 14 43 43 43 65 43 65 43 43 43 68 68 68 43 65 14 43 43 43 43 68 68 68 68
1.25 48 48 48 21 48 48 48 125 48 125 48 48 48 125 125 125 48 125 21 48 48 48 48 125 125 125 125
1.5 84 84 84 34 84 84 84 170 84 170 84 84 84 177 177 177 84 170 34 84 84 84 84 177 177 177 177
SIZE (IN.) 2 108 108 108 47 -108 108 216 108 216 108 108 108 389 389 389 108 216 47 108 108 108 108 389 389 389 389
2.5 190 190 ---190 190 ---190 190 190 ---190 --190 190 190 190 503 -503 --
3 370 370 ---370 370 ---370 370 370 ---370 --370 370 370 370 -----
4 670 670 --------670 670 670 -------670 -670 -----
6 ----------------------------
8 ----------------------------
10 ----------------------------
12 -----------------------------
continued on next page
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
M-3
FLOW DATA For Apollo® Ball Valves Cv FACTORS FOR APOLLO VALVES (continued from M-3) VALVE 77D-640 Series 77G-UL Series 77W Series 77-100/200 Series 79 Series 80 Series 82-100/200 Series 83A/83B Series 83R-100/200 Series 86A/86B Series 86R-100/200 Series 87A-100 Series 87A-200 Series 87A-700 Series 87A-900 Series 87A-F00 Series 87B-100 Series 87J-100 Series 87J-200 Series 87J-700 Series 87J-900 Series 87K-100 Series 87K-200 Series 87K-700 Series 87K-900 Series 88A-100 Series 88A-200 Series 88A-700 Series 88A-900 Series 88A-F00 Series 88B-100 Series 89-100 Series 9A-100 Series 90-100 Series 92-100 Series 93-100 Series 94A-100/200 Series 96-100 Series 399-100 Series 489-100 Series
M-4
1/4 -4.5 -8.1 8.5 8.4 8.1 8.1 -8.1 ---------------------8.4 8.3 8.3 8.3 8.3 6 8.3 8.4 8.4
3/8 -7.2 -15 8.5 7.2 14 14 -14 ---------------------7.2 6.7 6.7 6.7 6.7 7 6.7 7.2 7.2
1/2 -16 16 15 9.8 15 26 26 -26 --15 -15 ---15 -15 -15 -15 -15 -15 --15 5.7 5.7 5.7 5.7 19 5.7 15 15
3/4 11 36 36 51 32 30 51 51 -51 --19 -19 ---19 -19 -19 -19 -19 -19 --30 10 10 10 10 34 10 30 30
1 24 68 68 68 44 43 68 68 -68 --75 -75 75 --75 -75 -75 -75 -75 -75 75 -43 16 16 16 16 50 16 43 43
1.25 35 125 125 125 66 48 120 120 -120 ---------------------48 25 25 25 25 104 25 48 48
1.5 -177 177 177 148 84 170 170 170 170 170 86 195 86 195 195 -86 195 86 195 86 195 86 195 86 195 86 195 195 -84 40 40 40 40 268 40 84 84
SIZE (IN.) 2 -389 389 389 218 108 376 376 376 376 376 104 410 104 410 410 -104 410 104 410 104 410 104 410 104 410 104 410 410 -108 62 62 62 62 309 62 108 108
www.apollovalves.com
2.5 -503 -503 440 190 510 ----234 545 234 545 545 -234 545 234 545 234 545 234 545 234 545 234 545 545 -190 ----629 -190 190
3 ----390 370 996 -996 -996 375 1021 375 1021 1021 375 375 1021 375 1021 375 1021 375 1021 375 1021 375 1021 1021 375 370 ----1018 -370 370
4 ------1893 -1893 -1893 673 2016 673 2016 2016 673 673 2016 673 2016 673 2016 673 2016 673 2016 673 2016 2016 673 -----1622 ----
6 -----------1099 4837 1099 4837 4837 1099 1099 4837 1099 4837 1099 4837 1099 4837 1099 4837 1099 4837 4837 1099 ----------
8 -----------1902 9250 1902 9250 -1902 1902 9250 1902 9250 1902 9250 1902 9250 1902 9250 1902 9250 -1902 ----------
Customer Service (704) 841-6000
10 -----------3890 15170 3890 15170 -3890 3890 15170 3890 15170 3890 15170 3890 15170 3890 15170 3890 15170 -3890 ----------
12 -----
--
-------22390 -22390 ---22390 -22390 -22390 -22390 -22390 -22390 ------------
PRESSURE TEMPERATURE RATINGS
M-16
400 CWP
CS ASTM A216-WCB
(GRAPH 17)
Class 150
Alloy 20 ASTM A351-CN7M
(GRAPH 18)
www.apollovalves.com
Customer Service (704) 841-6000
