Blood Collection System Safety without compromise

VENOSAFE™ QUICK FIT holder The ergonomic, easy-to-use QUICK FIT system significantly improves the safety and comfort for the phlebotomist and patient...

64 downloads 697 Views 4MB Size
Blood Collection System

Safety without compromise

Safety meets quality

VENOJECT® needle: the reference needle for more comfort and quality

Reduced penetration force > more patient comfort

Regular wall

VENOJECT multi-sample needles used in combination with VENOSAFE™ and VENOJECT® tubes optimise patient’s comfort during venepuncture. Due to their sharp tip and specific, double bevel design, tissue damage and thromboplastin release is minimal and trauma during incision very low. The excellent needle coating allows the needle to travel smoothly from the moment of penetration until its withdrawal. ®

Thin wall Terumo thin wall

POINT Venoject II Ultra Thin Wall Needle (21G)

BEVEL

HEEL

DRAG

Competitive brand needle (21G)

A special valve design and composition reduces the contamination risk by tightly closing the distal end of the needle each time a tube is removed - VENOJECT® valves are recognised world-wide for their excellent resealing properties. VENOJECT® needles allow increased blood-flow rates due to their larger inner diameter and significantly decrease risks of haemolysis during venepuncture - ensuring consistently reliable test results.

QUICK Safe-TE holder: safety without compromise Following the increasing safety awareness, also in blood collection, Terumo responds to the market’s safety requirements by developing an excellent accessory for phlebotomy - the QUICK Safe-TE holder for multisample needles. The QUICK Safe-TE holder is a comfortable, easy-to-use and ergonomic product designed to facilitate blood drawing and to be safely discarded.

Performance enhancing laboratory solutions Higher safety standards and increased automation in laboratory procedures require a much higher performance of blood collection vessels. The combination of VENOSAFE™ tubes, VENOSAFE™ holders and VENOJECT® needles optimises the patient’s comfort and represents the quickest, easiest and one of the safest ways of blood collection. VENOSAFE™ tubes using the well-proven Terumo PET technology guarantee the absence of effects towards clinical parameters over their whole lifetime.

VENOSAFE™ QUICK FIT holder The ergonomic, easy-to-use QUICK FIT system significantly improves the safety and comfort for the phlebotomist and patient. The QUICK FIT bayonet ensures a very quick and safe needle insertion and release and cuts down working time. It allows multiple usage, hence decreasing costs and waste disposal.

VENOSAFE™ tube: the ultimate answer to the increasing need for safe, efficient and highly reliable blood collection systems VENOSAFE™ consists of a glass-clear PET tube with a patented gas barrier and a safety closure composed of a cap and an inner stopper part. The cap functions like a safety shield during opening and reclosing. The inner stopper part perfectly seals the tube and guarantees a smooth blood collection and sampling. Draw marks improve comfort during blood collection and lab efficiency by assuring correct blood/additive ratios.

A history of research and development In order to meet the increasing demand for standardisation of the laboratory environment and persistent demand for ultimate safety solutions, Terumo developed the VENOSAFE™ tube, the third generation of its outstanding clinical test systems combining the proven PET technology of VENOJECT ® II with the excellent safety features for the benefits of the user and the patient. VENOSAFE™ tubes are Terumo’s contribution to reduce the risk of contamination for phlebotomists and doctors and at the same time improve the sample turnaround-time and test results of the clinical laboratory.

VENOSAFE™ Blood Collection Systems

Benefits for blood collection

Glass-clear, unbreakable PET with patented gas barrier and light weight • High safety • Always accurate, standardised filling of tubes ––> cost saving, increased comfort for the patient • Highly ergonomic • Guarantees reliable and visual observation of the sample

Draw marks for all draw volumes on both sides of the label • Eases phlebotomists’ work • High accuracy of analysis ––> cost saving

Clear colour indication on labels and transparent safety cap for partial draw tubes • No double checking ––> eases phlebotomists’ work

Very smooth entry of the distal end of the needle into the soft stopper part of the VENOSAFE™ tube • Easy, quick and highly ergonomic successive blood collections • Improves comfort for the patient

Better grip on VENOSAFE™ tube bottom for precise hold during venepuncture • Eases phlebotomists’ work

Colour differentiation of the safety cap • Clear identification of tubes and necessary analyses ––> eases phlebotomists’ work

VENOSAFE™ Laboratory Systems

Benefits for the clinical laboratory Full rubber top • Considerably prolongs the lifetime of analyser samplers • Special coating reduces cell hang-up • Reduces cost

Draw marks on both sides of the label for all draw volumes • High accuracy of analysis • Improves lab efficiency and saves cost

Clear colour indication on labels and transparent safety cap for ­partial draw tubes • Improves lab efficiency

Safety cap • Improves safety during handling • Easy to remove • Reliable manual or automated recapping • Colour-coding (ISO 6710:1995) for safe, reliable identification, handling and analysis

Clot Activator (visible, white wall-coating) • Ensures fast, uniform clotting for a higher serum yield

Superior OLEFIN GEL • Guarantees high barrier properties during several days • Minimal interference with clinical analytes • No dispersion of oil-drops ––> prolongs the lifetime of analysers

Glass-clear, unbreakable PET with patented gas barrier and very light weight • Guarantees reliable visualisation of the sample • Ensures high accuracy of test results • Lower transport and disposal costs

Combination of VENOSAFE™ tube and safety cap within automation standards • Ensures high turnaround time of samples • Cost efficient

Special packaging for coagulation tubes • Guarantees the correct ratio of blood and additive during the whole shelf life and ensures extremely reliable haemostasis analyses • Safety for the patient

References Code

Tube Volume (ml)

Draw (ml)

Additive

Packaging

VF-052SP

5

2

Clot activator

12x100

VF-053SP

5

3

Clot activator

12x100

VF-054SP

5

4

Clot activator

12x100

VF-076SP

7

5.5

Clot activator

12x100

VF-109SP

10

9

Clot activator

12x100

VF-054SAS

5

3.5

Gel+Clot activator

12x100

VF-075SAS

7

4.5

Gel+Clot activator

12x100

VF-106SAS

10

6

Gel+Clot activator

12x100

VF-108SAS

10

8

Gel+Clot activator

12x100

VF-054SAS02

5

3.5

Gel+Clot activator

12x100

VF-075SAS02

7

4.5

Gel+Clot activator

12x100

VF-106SAS02

10

6

Gel+Clot activator

12x100

VF-108SAS02

10

8

Gel+Clot activator

12x100

VF-052SHL

5

2

Li-Heparin

12x100

VF-053SHL

5

3

Li-Heparin

12x100

VF-054SHL

5

4

Li-Heparin

12x100

VF-076SHL

7

5.5

Li-Heparin

12x100

VF-109SHL

10

9

Li-Heparin

12x100

VF-054SH

5

4

Na-Heparin

12x100

VF-109SH

10

9

Na-Heparin

12x100

VF-054SAHL

5

3.5

Gel+Li-Heparin

12x100

VF-075SAHL

7

4.5

Gel+Li-Heparin

12x100

VF-106SAHL

10

6

Gel+Li-Heparin

12x100

VF-108SAHL

10

8

Gel+Li-Heparin

12x100

VF-054ST

5

4

Thrombin

12x100

VF-052SFX

5

2

Na-Fluoride+K2-Oxalate

12x100

VF-053SFX

5

3

Na-Fluoride+K2-Oxalate

12x100

VF-054SFX

5

4

Na-Fluoride+K2-Oxalate

12x100

VF-052SFC

5

2

FC-mixture

12x100

VF-053SFC

5

3

FC-mixture

12x100

VF-054SFH

5

4

Na-Fluoride+Na-Heparin

12x100

VF-109SFX07

10

9

Na-Fluoride+K2-Oxalate

12x100

VF-054SADK

5

3.5

Gel+K2-EDTA

12x100

VF-075SADK01

7

5

Gel+K2-EDTA

12x100

VF-108SADK

10

8

Gel+K2-EDTA

12x100

Biochemistry (Serum)

Biochemistry (Serum-Gel)

Biochemistry (Plasma)

Biochemistry (Plasma-Gel)

Biochemistry (Emergency)

Glycaemia

Viral Load

Code

Tube Volume (ml)

Draw (ml)

Additive

Packaging

VF-052SDK

5

2

K2-EDTA

12x100

VF-053SDK

5

3

K2-EDTA

12x100

VF-054SDK

5

4

K2-EDTA

12x100

VF-076SDK

7

5.5

K2-EDTA

12x100

VF-109SDK

10

9

K2-EDTA

12x100

VF-052STK

5

2

K3-EDTA

12x100

VF-053STK

5

3

K3-EDTA

12x100

VF-054STK

5

4

K3-EDTA

12x100

VF-052SBCS

5

1.8

Buffered Na3-Citrate 3,8%

15x10

VF-052SBCS07

5

1.8

Buffered Na3-Citrate 3,2%

15x10

VF-053SBCS

5

2.7

Buffered Na3-Citrate 3,8%

15x10

VF-053SBCS07

5

2.7

Buffered Na3-Citrate 3,2%

15x10

VF-054SBCS

5

3.6

Buffered Na3-Citrate 3,8%

15x10

VF-054SBCS07

5

3.6

Buffered Na3-Citrate 3,2%

15x10

VF-053SCTAD

5

2.7

CTAD-solution

15x10

VF-054SCTAD

5

3.6

CTAD-solution

15x10

VF-076SCPD

7

4.8

CPD-A Solution

12x50

VF-076SACD

7

4.8

ACD-B Solution

12x50

VF-109SACD

10

7.8

ACD-B Solution

9x50

VF-053SJ

5

2.4

Buffered Na3-Citrate 3,8%

15x10

VF-053SJ07 Closed sedimentation system:

5

2.4

Buffered Na3-Citrate 3,1%

15x10

VT+ESRV

-

1.28

Buffered Na3-Citrate 3.2%

10x100

Hematology

Coagulation

Single piece pack solutions available, please contact your local Terumo office.

Blood Banking

Sedimentation

Table rack for VT+ESRV: RA+ESRV

1

Uridraw VF-109SURI

10

9

none

12x100

VF-054SLI

5

4

none

12x100

VF-109SLI

10

9

none

12x100

Liquidraw

Shelf life: Gel-items 24 months. Thrombin and Blood Banking items 12 months. VT+ESRV 12 months. All other items 18 months

For further specifications (e.g. transparent label, colour differentiation, etc.) please send your enquiries to [email protected] or consult our website: www.terumo-europe.com/laboratory.html This reference table is subject to changes. Automatic ESR Reader Systems And Decapping Devices on Request

Accessories QUICK FIT System Holders

Multi-Sample Needles Code

XX-VF10HGSQ

Description

VENOSAFE™ Holder

Packaging

Code

Description

Packaging

MN-2038MQ

0.9 x 40 mm

20x100

MN-2025MQ

0.9 x 25 mm

20x100

MN-2138MQ

0.8 x 40 mm

20x100

MN-2125MQ

0.8 x 25 mm

20x100

MN-2238MQ

0.7 x 40 mm

20x100

MN-2225MQ

0.7 x 25 mm

20x100

Description

Packaging

0.9 x 40 mm (blunt)

20x100

40x25

Urine Sampler XX-VFHQSAF

VENOSAFE™ Safety Holder

10x100

Code UN-2038Q

XX-VFHBQSU

VENOSAFE™ Single Use Holder

1x1500

VENOJECT® Luer-Adapter Code

Packaging

XX-MN2000Q

XX-ORGHQ

XX-ORGI

BacT/ALERT® Holder

BacT/ALERT® INSERT

10x10

10x10

20x100

Winged Blood Sampling Set with SURSHIELD® Protector Code

Tubing

Packaging

MN*SVS21BQ30

300 mm

16x50

MN*SVS23BQ30

300 mm

16x50

MN*SVS21BQ18

180 mm

16x50

MN*SVS23BQ18

180 mm

16x50

MN*SVS21BQ09

90 mm

16x50

MN*SVS23BQ09

90 mm

16x50

not CE-marked

Winged Blood Sampling Set XX-VF10HGSQ4

URINE TUBE Holder

40x25

Biological samples and blood collection sharps, in particular, should be considered as potentially infectious and should, therefore, be handled with care. All relevant instructions for use, as well as the policies and procedures of your facility, should be followed closely. Never recap used needles, but dispose them into approved biohazard containers.

Code

Tubing

Packaging

MN-SV21Q

300 mm

16x50

MN-SV23Q

300 mm

16x50

Further items with pre-assembled holders are also available, please send your enquiries to [email protected] or consult our website: www.terumo-europe.com/laboratory.html

Screw System VENOJECT® Luer-Adapter Code

0197

Code

Packaging

XX-MN2000

Holders Description

Packaging

XX-VF010HGS

VENOSAFE™ HOLDER

40x25

XX-VFHGLA

VENOSAFE™ HOLDER with luer adapter

1x500

20x100

VENOJECT Multi-Sample Needles ®

0197

Code

Description

Packaging

MN-2038M

0.9 x 40 mm

20x100

MN-2025M

0.9 x 25 mm

20x100

MN-2138M

0.8 x 40 mm

20x100

Winged Blood Sampling Set with SURSHIELD® Protector 0123

Code

Tubing

Packaging

MN*SVS21BW30

300 mm

16x50

MN*SVS23BW30

300 mm

16x50 16x50

MN-2125M

0.8 x 25 mm

20x100

MN*SVS21BW18

180 mm

MN-2238M

0.7 x 40 mm

20x100

MN*SVS23BW18

180 mm

16x50

MN-2225M

0.7 x 25 mm

20x100

MN*SVS21BW09

90 mm

16x50

MN*SVS23BW09

90 mm

16x50

Diff-Safe® Code

Description

Packaging

XX+VF00S

DIFF-SAFE®

10x1000

Winged Blood Sampling Set Code

Tubing

Packaging

MN-SV21

300 mm

16x50

MN-SV23

300 mm

16x50

Further items with pre-assembled holders are also available, please send your enquiries to [email protected] or consult our website: www.terumo-europe.com/laboratory.html

Tourniquets Code

Description

Packaging

XX+TC

Tourniquet for adults

100

XX+TCB1

Tourniquet for children

100

XX+TCB2

Tourniquet for babies (blue)

100

XX+TCB3

Tourniquet for babies (red)

100

Disposal Boxes Code XX+Q2500 XX+Q2510 XX+Q2010

Description TERUSAFE DISPOSAL BOX 2.5l, rectangular TERUSAFE DISPOSAL BOX 2.5l, round* TERUSAFE DISPOSAL BOX 2l, round*

Packaging 45 45 65

XX+Q1510

TERUSAFE DISPOSAL BOX 1.5l, round*

80

XX+Q0001

TERUSAFE ADHESIVE ADAPTER

50

TÜV/GS approved

* can be used with adhesive adapter

Biological samples and blood collection sharps, in particular, should be considered as potentially infectious and should, therefore, be handled with care. All relevant instructions for use, as well as the policies and procedures of your facility, should be followed closely. Never recap used needles, but dispose them into approved biohazard containers.

Safety without compromise

The VENOSAFE™ Blood Collection System of Terumo consists of a glass-clear PET tube with a patented gas barrier and a safety closure with a cap and inner stopper part. This well-established blood collection system reduces the contamination risk, improves the patient’s comfort and ensures fast and efficient collection and testing procedures.

... and so easy!

The Terumo QUICK FIT range offers a flexible solution for the most appropriate safety management in any situation. The elements of the QUICK FIT range like the QUICK FIT holder, the QUICK Safe-TE holder, the QUICK FIT multi-needle, the winged blood sampling set with protector and also the TERUSAFE sharps containers fit perfectly together.

Terumo Corporation 44-1, 2-chome, Hatagaya Shibuya-ku, Tokyo 151-0072, Japan Tel.: +81 3 3374 8111 Fax: +81 3 3374 8196 European Headquarters Terumo Europe n.v. Interleuvenlaan 40 3001 Leuven, Belgium Tel.: +32 16 38 12 11 Fax: +32 16 40 02 49 European Offices Terumo Europe n.v. Benelux Sales Division Interleuvenlaan 40 3001 Leuven, Belgium Tel.: +32 16 39 25 80 Fax: +32 16 39 25 99 The Netherlands: Tel.: 0800 0220396 Fax: 0800 0220414

www.terumo-europe.com

Laboratoires Terumo France S.A. Parc Ariane - Bât. Uranus 1, rue Hélène Boucher 78284 Guyancourt Cedex, France Tel.: +33 130 96 13 00 Fax: +33 130 43 60 85

Terumo Italia S.r.l. Via Simone Martini, 143 / 145 00142 Roma RM, Italy Tel.: +39 0651 96 14 20 Fax: +39 0650 30 407

Terumo Deutschland GmbH Ludwig-Erhard-Strasse 6 65760 Eschborn, Germany Tel.: +49 6196 80 230 Fax: +49 6196 80 23 200

Terumo Sweden AB Nya Varvet, Byggnad 90 Sven Källfelts Gata 18 426 71 Västra Frölunda, Sweden Tel.: +46 3174 85 880 Fax: +46 3174 85 890

Addresses subject to change, please consult our Website.

Terumo Denmark Filial of Terumo Sweden AB Tel.: +45 7020 93 80 Fax: +45 7020 94 80

TERUMO ®, VENOJECT® and SURSHIELD ® are registered trademarks of TERUMO CORPORATION

Terumo Deutschland GmbH Zweigniederlassung Spreitenbach Bodenäckerstrasse 3 8957 Spreitenbach, Switzerland Tel.: +41 56 419 10 10 Fax: +41 56 419 10 11 Terumo Europe España SL Avda. Juan Carlos I, Nº 13 - 7ª Planta Edificio Torre La Garena 28806 Alcalá de Henares (Madrid), Spain Tel.: +34 9021 01 298 Fax: +34 9021 01 358

Terumo UK Ltd Tamesis The Causeway Egham, Surrey TW20 9AW, United Kingdom Tel.: +44 1784 476 200 Fax: +44 1784 476 201

Terumo Europe N.V. Moscow Representative Office JSC Northern Tower 13Fr., 10 Testovskaya Street Moscow 123317, Russia Tel.: + 7 495 988 4740 Fax: + 7 495 988 4739

VENOSAFE™ is a trademark of TERUMO EUROPE N.V. BacT/ALERT® is a registered trademark of bioMérieux DIFF-SAFE ® is a registered trademark of ALPHA SCIENTIFIC ® Registered Trademark Published by Terumo Europe N.V. LA 07GB-0202FK-VI0(02.11)E