Resistors
Cylindrical High Power Surface Mount Metal Glaze™ CHP
Metal Glaze™ thick film element fired at 1000°C to solid ceramic
Cylindrical High Power
CHP Series Surface Mount Metal GlazeTM Up to 2 watts Up to 1000 volts 0.2 ohm to 2.2 megohm range • Up to 2 watts RoHS-compliant version available • Up to 1000 volts 150°C maximum operating • 0.2 ohm to 2.2 megohm range temperature
Metal GlazeTM thick film element fired at 1000°C to solid ceramic
High temperature dielectric coating
Solder over High nickel barrier temperature
• RoHS-compliant version available
dielectric coating
• 150°C maximum operating temperature
Solder over with EU Directive 2011/65/EU (RoHS2) All Pb-free parts comply nickel barrier
Electrical Data IRC Type
Industry Footprint
Size Code1
Maximum Power Rating
Working Voltage²
Maximum Voltage
Resistance Range (ohms)³
Product Category
Tolerance (±%)³
0.1 to 0.99
Low Range
1, 2, 5
100
CHP 1/8
1206
B&C
1/4W @ 70°C
200
400
1.0 to 1.0 M
Standard
1, 2, 5
50, 100
20 to 348K
Tight Tolerance
0.25, 0.5
50, 100
CHP 1/2
CHP 1
CHP 2
2010
D&E
2512
3610
1/2W @ 70°C
F
H
1W @ 70°C
2W @ 25°C 1.33W @ 70°C
300
350
500
600
700
1000
¹See pages 2 & 3 for product dimensions, recommended solder pads, and standard packaging.
TCR (ppm/°C)³
0.1 to 0.99
Low Range
1, 2, 5
100
1.0 to 348K
Standard
1, 2, 5
50, 100
0.1 to 0.99
Low Range
1, 2, 5
100
1.0 to 2.21M
Standard
1, 2, 5
50, 100
20 to 348K
Tight Tolerance
0.25, 0.5
50, 100
0.2 to 0.99
Low Range
1, 2, 5
100
Standard
1, 2, 5
50, 100
1.0 to 2.21M ²Not to exceed √P x R
³Consult factory for tighter TCR, tolerance, or resistance values.
Environmental Data Characteristics Characteristics
Maximum MaximumChange Change
Test Method
Test Method
Thermal Shock
Temperature Coefficient
As specified
±0.25% +.01 Ω
MIL-PRF-55342H, §4.8.3 MIL-R-55342H ParMethod 3.16 (-55°C 125°C) / -65°C) (MIL-STD-202, 107G:+ +150°C
Thermal Shock Operation Low Temperature
±0.5% + 0.01 ±0.25% +.01ohm Ω
MIL-R-55342H Par 3.9 (-65°C + 150°C, 5 cycles)
Low Temperature Operation
±0.25% 0.01Ωohm ±0.5%++.01
MIL-R-55342H Par 3.11 (-65°C @ working voltage)
Short Time Overload
±0.5% + 0.01 ohm ±1% for R>100K ohm
MIL-R-55342H Par 3.12 MIL-PRF-55342H, §4.8.7 2.5 x √ P x R for 5 seconds
High Temperature Exposure
±0.5% + 0.01 ohm
MIL-R-55342H Par 3.13 (-150°C for 100 hours)
Resistance to Bonding
Moisture Resistance
±0.25% + 0.01 ohm
MIL-R-55342H Par 3.14.2 (Reflow soldered to board at 260°C for 10 seconds) MIL-PRF-55342H, §4.8.8.2
Exposure
95% minimum coverage
MIL-STD-202, Method 208 (245°C for 5 seconds)
Solderability
±0.5% + 0.01 ohm
MIL-R-55342H Par 3.18 (10 cycles, total 240 hours)
Short Time Overload
High Temperature Exposure Resistance to Bonding Exposure
Temperature Coefficient Life Test
±1% for R>100KΩ ±0.5% +.01 Ω
±0.25% +.01 Ω ±0.5% +.01 Ω As specified ±1% +.01 Ω
MIL-PRF-55342H, §4.8.5 (-65°C) MIL-PRF-55342H, §4.8.6 (150°C x 100 Hours)
MIL-PRF-55342H, §4.8.8.2
(MIL-STD-202, Method 106G) MIL-PRF-55342H, §4.8.10 (MIL-STD-202, Method 304) MIL-PRF-55342H, §4.8.11
Moisture Resistance
±0.5% + 0.01 ohm
(MIL-STD-202, 108A: 2000 Hoursintermittent) @ 70°C) MIL-R-55342H ParMethod 3.15 (2000 hours at 70°C
Solderability Life Test
95%+ minimum ±1% 0.01 ohm coverage no mechanical damage
1200 gram push from underside (MIL-STD-202, Method 208H)of mounted chip for 60 seconds
no mechanical damage
exert pull on chip contacts for 5 seconds
Terminal Adhesion Strength
MIL-PRF-55342H, §4.8.12
±1% +.01 Ω IRC – defined Terminal Adhesion Strength (push) ±1% + 0.01 ohm Chip mounted in center of 90mm long board, deflected 1mm so as to (no mechanical damage) 1200 gram push from underside of mounted device for 60 sec ±1% +.01 Ω General Note Terminal Adhesion Strength (flex) IRC reserves the right to make changes in product specification(no withoutmechanical notice or liability. damage) All information is subject to IRC’s own data and is considered accurate at time of going to print.
IRC-defined Device mounted in center of 90mm long board, deflected 1 mm to exert pull on contacts for 5 seconds
© IRC Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
General Note Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
A subsidiary of TT electronics plc
CHP Series Issue MarchWelwyn 2011 Sheet 1 of 3 BI Technologies IRC
http://www.ttelectronics.com/resistors
© TT Electronics plc 11.16
CHP
Cylindrical High Power Surface Mount Metal Glaze™
Cylindrical High Power Surface Mount Metal GlazeTM
CHP Series
Physical Data L C
W
Dimensions (Inches and (mm))
IRC Type
Size Code
Industry Footprint
CHP 1/8
B
1206
0.128 ± 0.007 (3.25 ± 0.18)
CHP 1/2
D
2010
0.200 ± 0.010 0.079 (nom.) -0.006 / +0.011 (2.01 (nom.) -0.15 / +0.28) (5.08 ± 0.25)
0.030 ± 0.010 (0.761 ± 0.25)
CHP 1
F
2512
0.251 ± 0.010 (6.38 ± 0.25)
0.079 (nom.) -0.006 / +0.011 (2.01 (nom.) -0.15 / +0.28)
0.040 ± 0.010 (1.02 ± 0.25)
CHP 2
H
3610
0.367 ± 0.010 0.105 (nom.) -0.006 / +0.011 (2.67 (nom.) -0.15 / +0.28) (9.32 ± 0.25)
0.050 ± 0.010 (1.27 ± 0.25)
Actual Size
L
W
C
0.057 ± 0.006 (1.45 ± 0.15)
0.020 ± 0.010 (0.51 ± 0.25)
Recommended Solder Pad Dimensions (Reflow): F A
C
A
B
E
D
Size Code
Industry Footprint
Dimensions (Inches and mm)) A
B
C
D
E
F
0.093 (2.36)
0.058 (1.47)
0.098 (2.49)
0.032 (0.81)
0.211 (5.36)
B&C
1206
0.076 (1.93)
D
2010
0.111 (2.82)
0.126 (3.20)
0.096 (2.44)
0.152 (3.86)
0.040 (1.02)
0.318 (8.08)
E
2010
0.170 (4.32)
0.160 (4.06)
0.072 (1.83)
0.132 (3.35)
0.044 (1.12)
0.412 (10.46)
F
2512
0.121 (3.07)
0.126 (3.20)
0.127 (3.23)
0.183 (4.65)
0.040 (1.02)
0.369 (9.37)
H
3610
0.170 (4.32)
0.160 (4.06)
0.213 (5.41)
0.273 (6.93)
0.044 (1.12)
0.553 (14.05)
© IRC Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
CHP Series Issue March 2011 Sheet 2 of 3
BI Technologies IRC Welwyn http://www.ttelectronics.com/resistors
© TT Electronics plc 11.16
CHP
Cylindrical High Power Surface Mount Metal Glaze™
Cylindrical High Power Surface Mount Metal GlazeTM
CHP Series
Standard Reel Packaging per EIA-481: IRC Type
Size Code
Industry Footprint
CHP 1/8 MRC 1/2
B C
1206
CHP 1/2 MRC 1
D E
2010
CHP 1
F
2512
CHP 2
H
3610
Reel Diameter*
Quantity Per Reel
7″
2,500 max.
13″
10,000 max.
7″
1,500 max.
13″
5,000 max.
7″
1,500 max.
13″
5,000 max.
13″
1,500 max.
Carrier Tape Width
Component Pitch
8mm
4mm
12mm
4mm
12mm
4mm
24mm
4mm
*The 13″ reel is considered standard and will be supplied unless otherwise specified.
Repetitive Surge Curve
Power Derating Curve 100
1000
80
Peak Power (watts)
% of Rated Power
CHP 1/8, 1/2, 1
60 CHP 2 40 20 0
30
40
50 60
70
80
CHP 2 CHP 1
100
10
CHP 1/8
90 100 110 120 130 140 150 1 0.0001
Ambient Temperature (°C)
.1msec
0.0010 1msec
0.0100 10msec
0.1000
100msec
1.0000
10000msec
Surge or Pulse Duration (seconds) Note: Use for repetitive pulses where the average power dissipation is not to exceed the component rating at 70°C. Surge handling capacity for low-repetitive surges may be significantly greater than shown above. Contact factory for recommendations.
Ordering Data Sample Part No.
CHP 1
- 100
2203
F
13
LF
IRC Type
(CHP 1/8, CHP 1/2, CHP 1, or CHP 2)
Temperature Coefficient (50 ppm, 100 ppm)
Resistance Value
(100 ohms and greater - First 3 significant digits plus 4th digit multiplier) Example: 100 ohms = 1000, 1000 ohms = 1001, 150,000 ohms = 1503 (Less than 100 ohms - "R" is used to designate decimal) Example: 51 ohms = 51R0, 1 ohm = 1R00, 0.25 ohms = R250
Tolerance
(C = 0.25%, D = 0.5%, F = 1.0%; G = 2.0%; J = 5.0%)
Packaging Code*
(BLK = Bulk, 7 = 7" Reel, 13 = 13" Reel)
Lead Free Construction © IRC Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
CHP Series Issue March 2011 Sheet 3 of 3
BI Technologies IRC Welwyn http://www.ttelectronics.com/resistors
© TT Electronics plc 11.16
Cylindrical High Power Surface Mount Metal Glaze™ CHP Series
Ordering Procedure This product has two valid part numbers:
European (Welwyn) Part Number: CHP1-220KFI (CHP1 with TCR ±100ppm/°C at 220 kilohms ±1%, Pbfree) C
H
P 1
-
1
2
2
2
0
K
3
F
I
4
5
1
2
3
4
5
Type
TCR (ppm/°C)
Value
Tolerance
Termination & Packing
CHP1/8 CHP1/2 CHP1 CHP2
Omit for ±100 -50 = ±50
E24 = 3/4 characters C = ±0.25% E96 = 4/5 characters D = ±0.5% F = ±1% R = ohms K = kilohms G = ±2% M = megohms J = ±5%
I = Pb-free, Tape Pack PB = SnPb, Tape Pack CHP1/8 2500/7” reel CHP1/2, 1 Tape 1500/7” reel CHP2 1500/13” reel
USA (IRC) Part Number: CHP11002203FLF (CHP1 with TCR ±100ppm/°C at 220 kilohms ±1%, Pb-free) C
H
P
1
1
1
0
0
2
2
2
0 3
3
F
L
4
F 5
1
2
3
4
5
Type
TCR
Value
Tolerance
Termination & Packing
CHP1/8 CHP1/2 CHP1 CHP2
50 = ±50 3 digits + multiplier C = ±0.25% Omit for SnPb, Standard pack 100 = ±100 D = ±0.5% LF = Pb-free, Standard pack R = ohms for values <100 ohms F = ±1% CHP1/8 2500/7” reel G = ±2% CHP1/2 & 1 1500/7” reel CHP2 1500/13” reel J = ±5%
General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
BI Technologies IRC Welwyn http://www.ttelectronics.com/resistors
© TT Electronics plc 11.16
Mouser Electronics Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TT Electronics: CHP1/8-50-2R00-F CHP1-100-3013-F CHP1-100-90R9-F CHP1-100-1R82-F CHP1-100-3900-J CHP1-100-1003-F CHP1/2-100-4992-F CHP1-100-4020-F CHP1-100-1002-J CHP1-100-1002-F CHP1-100-6202-G CHP1-100-3R00-J CHP1-100-R270-F CHP1-100-1R30-F CHP1-100-3R00-F CHP1-100-1502-J CHP1/8-100-1003-J CHP1/8-1001001-F CHP1-100-5R60-F CHP1-50-50R0-D CHP1/8-100-1001-J CHP1-100-1000-F CHP1-100-2740-F CHP1/8100-1R30-F CHP1-100-5600-J CHP1/8-100-1000-G CHP1-100-R200-F CHP1/8-100-1000-J CHP1/8-100-1000-F CHP1/2-100-2R40-J CHP1/2-100-1001-J CHP1/8-50-1001-F-7 CHP1-100-5360-F CHP1/8-100-47R0-J CHP1/8-1002002-J CHP1-100-12R0-J CHP1/8-100-4421-F CHP1-100-4R02-F CHP1/8-100-5102-G CHP1-100-2000-F CHP1100-2000-J CHP1-100-39R0-F CHP1-100-3300-F CHP1-100-3300-J CHP1/8-100-3R32-F CHP1-100-6191-F CHP1100-75R0-J CHP1/8-50-10R0-F CHP2-100-5001-F CHP1-100-36R0-J CHP1-100-3601-J CHP1-100-3001-J CHP1100-1621-F CHP1/2-100-2002-J CHP1-100-47R5-F CHP1-100-10R0-J CHP1-100-10R0-F CHP1-50-1000-F CHP1/2-100-15R0-J CHP1-100-1330-F CHP1-50-1002-F CHP1-100-33R2-F CHP1-100-3600-J CHP1/8-100-R330-F CHP1/8-100-1501-F CHP1/8-100-6043-F CHP1-100-1201-J CHP1-100-1001-J CHP1/2-100-5000-J CHP1/8-100R500-J CHP1/8-100-2003-F CHP1-50-40R2-F CHP1/2-100-6810-F CHP1-100-1603-J CHP1-100-3320-F CHP1100-R180-F CHP1/2-100-10R0-J CHP2-100-3001-J-13 CHP1-50-75R0-F CHP1/8-100-10R0-J CHP1/8-100-10R0-F CHP1/8-100-22R0-J CHP1-100-1R50-J CHP1-100-1R50-F CHP1/8-100-R400-F CHP1/8-100-1900-J CHP1-1002R00-F CHP1-100-5603-J CHP1-100-4R70-J CHP1/2-100-1R00-F CHP1/8-100-1500-J CHP1/8-100-1500-G CHP1100-R330-F CHP1/2-100-1000-G CHP1/2-100-1000-F CHP1/2-100-1000-J CHP2-100-5600-F CHP1/8-100-20R0-J CHP1-100-3R32-F CHP1/2-100-3503-F
