HDPE PIPE

HDPE PIPE HDPE Pipe

1

Fabco Plastics is the leading Canadian supplier of industrial plastic pipe including HDPE. Our dedicated and knowledgeable sales staff can provide high quality technical information and accurate project quotations on a timely basis. Fabco provides HDPE pipe to 63”, custom fabricated butt fusion fittings, butt fusion equipment and easy to use electrofusion fittings to 12”. The standard length of HDPE pipe is 50 feet, in sizes above 2” in diameter with longer lengths available on request. Coiled pipe is available in diameters up to 3” and is available in 250 and 500 foot lengths. Larger pipe sizes and coil lengths are available on special request.

2 3 4 5

Features: HDPE Pipe is Leak Proof

• HDPE pipe can be joined by thermal fusion to form a joint that is as strong as the pipe itself and is leak free. Thermal fusion eliminates potential leak points every 8-20 feet commonly found with Concrete, PVC and Ductile Iron pipe. Leak proof joints also eliminate infiltration and exfiltration problems experienced with other pipe joining methods. Since fused joints are self-restraining, costly thrust restraints or thrust blocks are not required.

6 7 8

HDPE Pipe is Corrosion and Chemical Resistant

• HDPE pipe will not corrode, tuberculate or support biological growth. It is the material of choice in harsh chemical environments. HDPE pipe has a smooth ID and maintains its flow capability over time - Hazen Williams C Factor remains 150, even after years of use.

HDPE Pipe is Flexible and Fatigue Resistant

9

• HDPE pipe can be bent to a radius 25 times the nominal pipe diameter. This can eliminate many fittings required for directional changes compared to piping systems made from other materials. In addition, the flexibility of HDPE pipe makes it well suited for dynamic soils and areas prone to earthquake. HDPE pipe for pressure applications can accept repetitive pressure surges that exceed the static pressure rating of the pipe.

HDPE Pipe is Lightweight and Impact Resistant

• HDPE pipe is much easier to handle and install than heavier, rigid metallic or concrete pipe, allowing for cost advantages in the construction process. It is structurally better able to withstand an impact than other pipe materials, especially in cold weather installations when other pipes like PVC are prone to cracks and breaks.

HDPE Pipe is Easy to Install

• Flexibility and leak free joints allow for unique and cost effective methods of installation of HDPE pipe that the rigid Concrete, PVC and Ductile Iron pipes can’t use. These alternate installation methods (Horizontal Directional Drilling, Pipe Bursting, Sliplining, Plow and Plant, Submerged or Floating Pipe) can save considerable time and money in most applications.

HDPE Pipe is Cost Effective and Permanent

• HDPE pipe is cost effective and has long term cost advantages due to its physical properties, leak free joints and reduced maintenance costs. The Plastics Pipe Institute estimates the service life for HDPE pipe to conservatively be 50-100 years.

10 1-48

Toronto, Edmonton, Saskatoon, Vancouver, Montreal

HDPE PIPE Average Nominal Outside Pipe DiamSize eter 3 3.50 4 4.50 5 5.56 6 6.63 7 7.13 8 8.63 10 10.75 12 12.75 13 13.38 14 14.00 16 16.00 18 18.00 20 20.00 22 22.00 24 24.00 26 26.00 28 28.00 30 30.00 32(M) 31.59 36 36.00 40(M) 39.47 42 42.00 48(M) 47.38 54 54.00 55(M) 55.30 63(M) 63.21

DR32.5 (50 Average Min. Inside Wall Diam- Thicketer ness 4.206 0.138 5.200 0.171 6.193 0.204 6.660 0.219 8.062 0.265 10.049 0.331 11.918 0.392 12.503 0.412 13.087 0.431 14.956 0.492 16.826 0.554 18.695 0.615 20.565 0.677 22.434 0.738 24.304 0.800 26.174 0.862 28.043 0.923 29.533 0.972 33.652 1.108 36.894 1.214 39.260 1.292 44.291 1.458 50.478 1.662 51.688 1.701 59.086 1.945

PSI) Average Weight (lbs/ft) 0.83 1.27 1.80 2.08 3.05 4.73 6.66 7.33 8.03 10.48 13.27 16.38 19.82 23.59 27.68 32.11 36.86 40.88 53.08 63.80 72.24 91.94 119.42 125.22 163.62

DR26 (64 PSI) Average Min. Average Inside Wall Weight Diam- Thick(lbs/ft) eter ness 4.133 0.173 1.03 5.109 0.214 1.57 6.085 0.255 2.23 6.544 0.274 2.58 7.922 0.332 3.78 9.873 0.413 5.87 11.710 0.490 8.25 12.284 0.514 9.08 12.858 0.538 9.95 14.695 0.615 12.99 16.532 0.692 16.45 18.369 0.769 20.30 20.206 0.846 24.57 22.043 0.923 29.24 23.880 1.000 34.31 25.717 1.077 39.80 27.554 1.154 45.68 29.018 1.215 50.67 33.065 1.385 65.79 36.251 1.518 79.07 38.575 1.615 89.54 43.519 1.822 113.96 49.597 2.077 148.02 50.786 2.127 155.20 58.055 2.431 202.81

DR11 (160 PSI) Nominal Average Pipe Outside Size Diameter 3 4 5 6 7 8 10 12 13 14 16 18 20 22 24 26 28 30 32(M) 36

3.50 4.50 5.56 6.63 7.13 8.63 10.75 12.75 13.38 14.00 16.00 18.00 20.00 22.00 24.00 26.00 28.00 30.00 31.59 36.00

Average Inside Diameter 2.825 3.633 4.491 5.348 5.752 6.963 8.678 10.293 10.797 11.302 12.916 14.531 16.145 17.760 19.375 20.989 22.604 24.218 25.505 29.062

Notes

DR21 (80 PSI) Average Min. Average Inside Wall Weight Diam- Thick(lbs/ft) eter ness 3.147 0.167 0.76 4.046 0.214 1.26 5.001 0.265 1.93 5.956 0.315 2.73 6.406 0.339 3.16 7.754 0.411 4.63 9.665 0.512 7.19 11.463 0.607 10.11 12.025 0.637 11.13 12.587 0.667 12.19 14.385 0.762 15.93 16.183 0.857 20.16 17.981 0.952 24.88 19.779 1.048 30.11 21.577 1.143 35.83 23.375 1.238 42.05 25.173 1.333 48.77 26.971 1.429 55.99 28.405 1.504 62.10 32.366 1.714 80.62 35.485 1.879 96.91 37.760 2.000 109.74 42.599 2.256 139.67 48.549 2.571 181.41 49.713 2.633 190.21 56.828 3.010 248.55

DR9 (200 PSI)

Min. Wall Thickness

Average Weight (lbs/ft)

Average Inside Diameter

0.318 0.409 0.506 0.602 0.648 0.784 0.977 1.159 1.216 1.273 1.455 1.636 1.818 2.000 2.182 2.364 2.545 2.727 2.872 3.273

1.38 2.29 3.50 4.96 5.74 8.41 13.06 18.37 20.22 22.15 28.93 36.62 45.21 54.70 65.10 76.41 88.61 101.72 112.82 146.48

2.676 3.440 4.253 5.064 5.447 6.593 8.218 9.747 10.224 10.702 12.231 13.760 15.289 16.818 18.347 19.876 21.404 22.933 24.152 -

PSI) Average Weight (lbs/ft) 0.93 1.54 2.35 3.33 3.85 5.65 8.77 12.34 13.58 14.87 19.43 24.59 30.35 36.73 43.71 51.30 59.50 68.30 75.75 98.35 118.22 133.86 170.37 221.29 232.03 -

DR7.3 (254 PSI)

Min. Wall Thickness


Average Inside Diameter

Min. Wall Thickness


0.389 0.500 0.618 0.736 0.792 0.958 1.194 1.417 1.486 1.556 1.778 2.000 2.222 2.444 2.667 2.889 3.111 3.333 3.510 -

1.65 2.73 4.17 5.92 6.85 10.03 15.59 21.92 24.13 26.43 34.53 43.70 53.95 65.28 77.68 91.17 105.71 121.38 134.62 -

2.484 3.193 3.947 4.701 5.056 6.120 7.628 9.047 9.491 9.934 11.353 12.773 14.192 15.611 17.030 18.449 -

0.479 0.616 0.762 0.908 0.976 1.182 1.473 1.747 1.832 1.918 2.192 2.466 2.740 3.014 3.288 3.562 -

1.97 3.26 4.99 7.07 8.18 11.98 18.62 26.19 28.82 31.58 41.24 52.20 64.44 77.98 92.80 108.91 -

• Pipe dimensions are in accordance with ASTM F714 and AWWA C906. • Pressure ratings are for water at 73.4 deg F. • Some of the pipe sizes and/or DRs above are only available upon request. • Other diameters and DRs not listed may be available upon special request. • All dimensions are in inches unless otherwise specified. • Weights are calculated by the methodology established in PPI’s TR7.

www.fabcoplastics.com

DR17 (100 Average Min. Inside Wall Diam- Thicketer ness 3.064 0.206 3.939 0.265 4.869 0.327 5.799 0.390 6.236 0.418 7.549 0.507 9.409 0.632 11.160 0.750 11.707 .0787 12.254 0.824 14.005 0.941 15.755 1.059 17.506 1.176 19.256 1.294 21.007 1.412 22.758 1.529 24.508 1.647 26.259 1.765 27.654 1.858 31.511 2.118 34.547 2.322 36.762 2.471 41.473 2.787 47.266 3.176 48.399 3.253 -

1 2 3 4 5 6 7 8 9 10

1-49

HDPE FITTINGS Butt 45° Elbows

1

(Elongated)

SDR 11 (STANDARD DIMENSION RATIO) 160 PSI (WORKING PRESSURE AT 73.4°F)

2 3 4 5

A (IN) 3.23 4.72 5.31 6.89 8.46 10.04 10.63

B (IN) 2.64 3.86 4.21 5.35 6.54 7.64 7.8

B (IN)

C (IN) WALL

3/4” IPS 1” IPS 1 1/4” IPS 1 1/2” IPS 2” IPS 3” IPS 4” IPS 6” IPS 8” IPS 10” IPS 12” IPS

2.28 2.48 2.83 3.07 3.23 4.72 5.31 6.89 8.46 10.04 10.63

2.05 2.17 2.44 2.64 2.64 3.86 4.21 5.35 6.54 7.64 7.8

0.095 0.119 0.151 0.173 0.216 0.318 0.409 0.603 0.785 0.978 1.16

D (IN) E WEIGHT OD (IN) (LBS) 1.05 1.315 1.66 1.9 2.375 3.5 4.5 6.625 8.625 10.75 12.75

4.29 4.69 5.31 5.91 6.38 9.33 10.63 14.09 17.48 20.94 22.64

0.05 0.08 0.14 0.21 0.35 1.07 2 5.55 11.64 21.3 31.84

C (IN)WALL 0.14 0.206 0.264 0.39 0.508 0.633 0.75

D (IN) OD 2.375 3.5 4.5 6.625 8.625 10.75 12.75

E (IN) 6.38 9.33 10.63 14.09 17.48 20.94 22.64

WEIGHT (LBS) 0.23 0.72 1.32 3.77 8.03 14.44 21.3

Molded of PE 100/4710/3408 Black

Butt 90° Elbows (Elongated)


7

NOMINAL DIAMETER 3/4” IPS 1” IPS 1 1/4” IPS 1 1/2” IPS 2” IPS 3” IPS 4” IPS 6” IPS 8” IPS 10” IPS 12” IPS

8

10

A (IN)


NOMINAL DIAMETER 2” IPS 3” IPS 4” IPS 6” IPS 8” IPS 10” IPS 12” IPS

6

9

NOMINAL DIAMETER

A (IN) 2.68 2.91 3.35 3.7 4.25 5.91 6.89 9.06 11.81 13.78 14.96

B (IN) 2.05 2.17 2.44 2.64 2.95 4.06 4.53 5.63 7.2 8.27 8.46

C (IN) WALL 0.095 0.119 0.151 0.173 0.216 0.318 0.409 0.603 0.785 0.978 1.16

D (IN) OD 1.05 1.315 1.66 1.9 2.375 3.5 4.5 6.625 8.625 10.75 12.75

E WEIGHT (IN) (LBS) 3.2 0.05 3.57 0.09 4.18 0.16 4.65 0.22 5.44 0.43 7.66 1.25 9.14 2.42 12.37 6.76 16.13 15.08 19.15 27.06 21.33 41.05



A (IN) 4.25 5.91 6.89 9.06 11.81 13.78 14.96

B (IN) 2.95 4.06 4.53 5.63 7.2 8.27 8.46

C (IN)WALL 0.14 0.206 0.264 0.39 0.508 0.633 0.75

D (IN) OD 2.375 3.5 4.5 6.625 8.625 10.75 12.75

E (IN) 5.44 7.66 9.14 12.37 16.13 19.15 21.33

WEIGHT (LBS) 0.28 0.8 1.64 4.8 10.05 18.33 27.47


1-50


HDPE FITTINGS Butt End Caps

1

(Elongated)


NOMINAL DIAMETER 3/4” IPS 1” IPS 1 1/4” IPS 1 1/2” IPS 2” IPS 3” IPS 4” IPS 6” IPS 8” IPS 10” IPS 12” IPS

A (IN) B (IN) 2.05 2.2 2.52 2.83 3.23 4.72 5.31 6.89 8.66 9.84 11.77

0.095 0.119 0.151 0.173 0.216 0.318 0.409 0.603 0.785 0.978 1.16

C (IN) D (IN) WALL OD 1.05 1.77 1.315 1.77 1.66 1.99 1.9 2.2 2.375 2.52 3.5 3.7 4.5 3.98 6.625 4.84 8.625 5.83 10.75 6.3 12.75 7.52

2

WEIGHT (LBS) 0.02 0.04 0.07 0.1 0.19 0.59 1.07 2.88 6.32 10.9 18.39

3



A (IN) 3.23 4.72 5.31 6.89 8.66 9.84 11.77

B (IN) 0.14 0.206 0.264 0.39 0.508 0.633 0.75

C (IN)WALL 2.375 3.5 4.5 6.625 8.625 10.75 12.75

D (IN) OD 2.52 3.7 3.98 4.84 5.83 6.3 7.52

WEIGHT (LBS) 0.12 0.39 0.71 1.98 4.23 7.53 12.4


Butt Flange Adapters (Elongated)

SDR 11 (STANDARD DIMENSION RATIO) 160 PSI (WORKING PRESSURE AT 73.4°F) NOMINAL DIAMETER 3/4” IPS 1” IPS 1 1/4” IPS 1 1/2” IPS 2” IPS 3” IPS 4” IPS 6” IPS 8” IPS 10” IPS 12” IPS

A (IN) OD 1.05 1.315 1.66 1.9 2.375 3.5 4.5 6.625 8.625 10.75 12.75

B C (IN) D (IN) (IN) 1.85 0.39 4.02 2.36 0.39 4.02 2.8 0.39 4.02 3.15 0.39 4.02 3.94 0.55 6.1 5 0.67 6.1 6.61 0.79 6.1 8.5 1.02 8.07 10.63 1.26 10.67 12.99 1.38 11.5 15.75 1.5 10.83

E (IN) WEIGHT WALL (LBS) 0.095 0.07 0.119 0.11 0.151 0.16 0.173 0.12 0.216 0.48 0.318 0.93 0.409 1.66 0.603 4.07 0.785 8.73 0.978 14.11 1.16 19.88



A (IN) OD 2.375 3.5 4.5 6.625 8.625 10.75 12.75

B (IN) 3.94 5 6.61 8.5 10.63 12.99 15.75

C (IN) 0.55 0.67 0.79 1.02 1.02 1.18 1.38

D (IN) 6.1 6.1 6.1 8.07 10.67 11.5 10.83

E (IN) WALL WEIGHT (LBS) 0.14 0.37 0.206 0.71 0.264 1.27 0.39 3.02 0.508 6.02 0.633 10.06 0.75 14.17



4 5 6 7 8 9 10

1-51

HDPE FITTINGS

1

Ductile Iron Backing Rings Conventional Cross Section in Ductile Iron

2

• Description: A conventional cross section (reduced section modulus) in ductile iron. • Utilization: A back-up ring for IPS or APR connections. Buttweld or integrally flared stub-ends. • Materials: Cast in ductile iron A536. Tensile strength 80,000 psi, yield 55,000 psi, elongation 6%. • Dimensions: Vital dimensions AWWA C207, Mates with ANSI B16.5, B16.47; AWWA C207. • Finish: Red oxide primer, hot dipped galvanized

3 PIPE DIAMETER 1" 1 1/4" 1 1/2" 2" 3" 4" 6" 8" 10" 12"

4 5

OD 3.5 4.63 5.0 6.0 7.5 9.0 11.0 13.5 16.0 19.0

FLANGE THICKNESS 0.44 0.5 0.5 0.5 0.5 0.56 0.63 0.63 0.63 0.75

Butt Reducers

6

BOLT # 4 4 4 4 4 8 8 8 12 12

BOLT HOLE DIAMETER BOLT CIRCLE 0.63 2.38 0.63 3.5 0.63 3.88 0.75 4.75 0.75 6.0 0.75 7.50 0.88 9.5 0.88 11.75 1.0 14.25 1.0 17.0

(Concentric Elongated) SDR 17 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F) NOMINAL A B C DIAMETER (IN) (IN) (IN)

7

3 x 2” IPS 4 x 2 ” IPS 4 x 3” IPS 6 x 3” IPS 6 x 4” IPS 8 x 6” IPS 10 x 8” IPS 12 x 8” IPS 12x10” IPS

8

7.87 9.06 9.06 11.42 11.42 12.8 14.37 16.54 16.54

3.94 4.33 4.33 5.12 5.12 6.1 6.25 7.09 7.09

2.95 2.95 3.94 3.94 4.33 5.12 5.813 6.1 6.69

D (IN) WALL 0.206 0.264 0.264 0.39 0.39 0.508 0.75 0.75 0.75

E (IN) OD 2.375 2.375 3.5 3.5 4.5 6.625 8.625 8.625 10.75

F (IN) OD 3.5 4.5 4.5 6.625 6.625 8.625 10.75 12.75 12.75

G WEIGHT (IN) (LBS) WALL 0.14 0.47 0.14 0.8 0.206 0.94 0.206 2.18 0.264 2.39 0.39 4.92 0.508 10.21 0.508 12.82 0.633 14.43


NOMINAL DIAMETER 2 x 1 ” IPS 3 x 2” IPS 4 x 2” IPS 4 x 3” IPS 6 x 3” IPS 6 x 4 ” IPS 8 x 6” IPS 10 x 8” IPS 12 x 8” IPS 12 x 10” IPS

9 10

ID 0.91 1.72 1.97 2.75 3.56 4.56 6.75 8.75 10.88 12.88

A (IN)

B (IN)

C (IN)

6.5 7.87 9.06 9.06 11.42 11.42 12.8 14.37 16.54 16.54

2.95 3.94 4.33 4.33 5.12 5.12 6.1 6.25 7.09 7.09

2.64 2.95 2.95 3.94 3.94 4.33 5.12 5.875 6.1 6.69

D (IN) WALL E (IN) OD F (IN) OD 0.216 0.318 0.409 0.409 0.603 0.603 0.785 1.16 1.16 1.16

1.9 2.375 2.375 3.5 3.5 4.5 6.625 8.625 8.625 10.75

2.375 3.5 4.5 4.5 6.625 6.625 8.625 10.75 12.75 12.75

G (IN) WALL

WEIGHT (LBS)

0.173 0.216 0.216 0.318 0.318 0.409 0.603 0.785 0.785 0.978

0.29 0.7 1.21 1.41 3.21 3.54 7.31 14.45 19.11 21.66


1-52


HDPE FITTINGS Butt Tees

(Elongated)

SDR 11 (STANDARD DIMENSION RATIO) 100 PSI (WORKING PRESSURE AT 73.4°F) NOMINAL DIAMETER 3/4” IPS 1” IPS 1 1/4” IPS 1 1/2” IPS 2” IPS 3” IPS 4” IPS 6” IPS 8” IPS 10” IPS 12” IPS

A (IN) B (IN) C (IN) D (IN) E (IN) 5 5.67 6.61 7.99 8.66 11.81 13.78 18.11 23.62 27.56 31.57

2.5 2.83 3.31 4 4.33 5.91 6.89 9.06 11.81 13.78 15.97

0.095 0.119 0.151 0.173 0.216 0.318 0.409 0.603 0.785 0.978 1.16

1.05 1.315 1.66 1.9 2.375 3.5 4.5 6.625 8.625 10.75 12.75

1.77 1.77 2.01 2.52 2.48 3.54 3.94 4.72 5.71 6.3 7.52

WEIGHT (LBS) 0.09 0.17 0.3 0.47 0.82 2.18 4.02 10.91 24.61 42.6 67.85



A (IN) 8.66 11.81 13.78 18.11 23.62 27.56 31.57

B (IN) 4.33 5.91 6.89 9.06 11.81 13.78 15.97

C (IN) 0.14 0.206 0.264 0.39 0.508 0.633 0.75

D (IN) 2.375 3.5 4.5 6.625 8.625 10.75 12.75

E (IN) 2.48 3.54 3.94 4.72 5.71 6.3 7.52

WEIGHT (LBS) 0.53 1.45 2.58 7.24 16.6 28.9 45.32

PIPE NOMINAL NOMINAL NOMINAL NOMINAL OD L D D1 T .63" 2.953 1.22 1.398 1.476 1.05" 3.189 1.417 1.496 1.594 1.315" 3.504 1.732 1.654 1.752 1.66" 3.898 2.087 1.811 1.949 1.9" 4.37 2.638 2.008 2.185 2.375" 5 3.13 2.185 2.5 3.5" 5.551 4.33 2.835 2.736 4.5" 5.98 5.55 3.307 2.95 6.625" 7.126 8.11 4.39 3.52 8.625" 9.094 10.551 5.433 4.469 10.75" 12.75"

(Fiber Reinforced)

STEEL INSERT, INJECTION MOLDED, HIGH STIFFNESS, DIMENSIONAL AND HEAT STABILITY

PIPE D D2 D3 B OD (MM-IN) DIAMETER (IN) (IN) (IN) (IN) 1/2" 20 - 1/2" - MOP 160 psi 3.74 0.63 1.102 0.472 3/4" 25 - 3/4" - MOP 160 psi 4.016 0.63 1.339 0.472 1" 32 - 1" - MOP 160 psi 4.488 0.630 1.654 0.630 1 1/4" 40 - 1 1/4" - MOP 160 psi 5.118 0.630 2.008 0.630 1 1/2" 50 - 1 1/2" - MOP 160 psi 5.236 0.630 2.441 0.709 2" 63 - 2" - MOP 160 psi 6.378 0.787 3.071 0.709 2 1/2" 75-2 1/2"- MOP 160 psi 7.244 0.787 3.622 0.709 3" 90 - 3" - MOP 160 psi 7.638 0.787 4.370 0.709 4" 110/125 - 4" - MOP 160 psi 9.015 0.787 5.236 0.709 6" 160 - 6" - MOP 160 psi 11.141 0.866 7.008 0.945 8" 200/225 - 8" - MOP 160 psi 13.582 0.866 9.291 0.945 10" 250 - 10" - MOP 160 psi 16.22 0.984 11.339 1.063 12" 315 - 12" - MOP 160 psi 19.17 0.984 13.307 1.260


3 4 5

SDR 17-7.4 PE 100/4710 BLACK. MOP WATER 160PSI / GAS 100PSI INJECTION MOLDED.

PP Gray Steel Backing Ring ANSI

2


Electro-Fusion Coupler NOMINAL SIZE DA (OD) 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 3" 4" 6" 8" 10" 12"

1

6 7 8

K (IN) 2.38 2.75 3.120 3.500 3.880 4.750 5.500 6.000 7.500 9.500 11.750 14.250 17.000

9 10

1-53

HDPE PIPE

Recommend Documents