NAYLOR Clay & Plast ic Products DRAINAGE

NAYLOR DRAINAGE

e m a i l : s a l e s @ n a y l o r. c o . u k

Winners Growing Business

The MANUFACTURING EXCELLENCE Awards Winner - Best SME

Clay & Plastic Products

Price List June 2011

w e b : w w w. n a y l o r. c o . u k

Orders and Deliveries

NAYLOR DRAINAGE

See General Conditions of Sale at the back of this Price List. CARRIAGE PAID LOAD SIZE - INTO STOCK £1950 over £3500 nett goods value or full arctic load - direct to site.

TIMED DELIVERIES Deliveries required at a specific time will incur a charge of £50.

SMALL LOAD CHARGES (based upon NETT Goods Value) Nett load values between £3500 and £2501 = £250 charge Nett load values between £2500 and £1501 = £350 charge Load values under £1000 - Should be supplied ex yard by a Naylor merchant stockist. If delivered direct to site haulage will be charged at £450.

WAITING TIME Chargeable after one hour standing on site at £50 per hour or part thereof. BAND-SEAL ONLY, BY OVERNIGHT CARRIER Carriage paid at £200 nett goods value - Excludes Ireland, Highlands and Islands. MINIMUM ORDER VALUE (excludes Band-Seal) £125 Nett goods value.

DELIVERY Standard delivery is 5 working days subject to product and vehicle availability (for carriage paid or full loads).

RETURNS Naylor operates a nil return policy.

All deliveries will be on curtain sided vehicles, unless otherwise specified at the time of order, and the unloading is the responsibility of the customer unless moffat off-load is booked at the time of order.

COLLECTIONS 24 Hours notice must be given for all orders. A timed collection slot will be allocated at time of order. No collections after 4.00pm. 10% Surcharge will be applied to all orders. Minimum order value £100. All split packs of pipe will attract a 25% surcharge.

MOFFAT OFF-LOADING (Site deliveries only) Charged at £150 per drop.

Product Standards T

Certificate No. FM1420 QAS 2489 2/258

TI CER FIED

RM FI

I

E RE D

BS EN295: Lic. KM20173

BAND-SEAL

BAND-SEAL

Naylor Drainage Ltd

Naylor Drainage Ltd

DIN EN 295-1

DIN EN 295-4

BAND-SEAL O

BRITISH ANDARD ST

REG

ST

BRITISH ANDARD ST

BSI

O

T

NAYLOR DRAINAGE LTD

NAYLOR DRAINAGE LTD

TI CER FIED

NAYLOR DRAINAGE LTD

Lic. KM33388 WIS 4-41-01

NAYLOR METRO-DUCT & METRO-DRAIN

BBA

BRITISH BOARD OF AGREMENT

CERTIFICATE No. 03 / R132 CERTIFICATE No. 09 / H145

Naylor Drainage Ltd is licensed to BS EN 295 enabling most drainage products in this price list to bear the kitemark. The Company is also registered by the BSI as a firm of Assessed Capability demonstrating that their Quality Assurance system complies with ISO 9001 : 2000 (EQUIVALENT TO BS 5750)

CONTENTS Densleeve

2-5

Pipes, Bends, Gullies & Fittings

Denseal

6-7 8-9 10-11 11 11 11 12 13-16

31

Metro Ducting

32

Naylor Specialist Plastics

33

Denlok

34

Filter Tiles

34

For Sludge Handling

17-18

BBA Twinwall Pipes & Fittings

N-Drain Systems

Metro Access Systems

Jacking Pipes

Couplings & Adaptors

MetroDrain Systems

27-30

Ducting, Tube & Specialised Products

Ancillary Ironwork

Band-Seal

Metro Ducting Systems

General Purpose Duct & MetroSmooth

Pipes

Metal Work

26

Access Boxes, Covers & Frames

Pipes

Denline

Metro Power / Sealed Systems

Twinwall Ducting

Garage, Mud & Grease

Denduct

25

Class 2 E.N.A.T.S. Twinwall Cable Duct

Clay & Plastic

Gullies

Aqua-Lite Linear Drainage Aqua-Lite

Pipes, Bends, Fittings & Interceptors

Road Gullies

25

Perforated & Unperforated Land Drainage

Pipes, Bends & Fittings

Channels

Land Drainage Agri-Drain

Hathernware

35

Pipes & Fittings, Fully Chemical & Thermal Shock Resistant

19-20

Handling & Unloading

37

21-23

Packaging Charges & Returns

37

Agricultural Twinwall Pipes & Fittings

Plastic Drainage Singlewall & PVC-u, & Gullies

Land Drainage

24

General Condition of Sale

38-40

24

COSHH

41-44

Perforated & Unperforated Land Drainage

Environmental Products Rainwater Management Solutions

All prices stated are Pounds Sterling, unless otherwise stated.

All dimensions are in millimetres.

Pipe lengths are given in metres.

1

Densleeve

NB - Fittings & Couplings are priced separately. Clay Pipes sold only by pack into stock. 15% of our Clayware products are made from recycled material. For a copy of our Drainage Design Handbook e-mail your details to: [email protected]

Plain-end vitrified clay sewer pipes & fittings with sleeve joints to BS EN 295

Pipes

Estimator’s Guide No Coupling Code Code With Coupling Price per (m) Price per (m) 22009 7.39 17036 9.77 22002 17.71 17022 24.19

Pack Standard DN L (m) Qty. 79 1.75 100 41 1.75 150

Densleeve Plus - Complete with fitted coupling Pack Qty. 20 12

Standard Length (m) 1.75 2.00

DN

Code

225 300

22003 22005

Price per (m) 56.39 86.16

Taper

Pack Qty. 25 20 16 4

DN 100* 150* 225* 300*

EPDM Each Code 20008 4.17 20010 11.35 20013 20.74 20015 41.13

Nitrile Code 20009 20011 20014 20016

Each 7.36 18.76 32.34 78.01

EPDM seals as standard, Nitrile also available. *Made from 100% recycled material

Each 22.87 92.66 221.67

DN

Curved Square 90° and Oblique 45°

100x100 150x100 150x150 225x100 225x150 225x225 300x100 300x150 300x225 300x300

Code (Oblique) 19035 19036 19037 19043 19044 19045 19046 19048 19050 19051

Product DN 100 150 225 300

Codes 90° 19001 19002 19004 19005

45° 19007 19008 19010 19011

22½° 19016 19017 19019 19020

11¼° 19021 19022 19024 19025

Each 8.91 24.81 84.95 160.79

Universal Gully c/w Grate with Horizontal Back Inlet Coupling Universal Gully c/w Sealing Plate with Horizontal Back Inlet Coupling Universal Gully

Rest Bend DN 100 150 225 300

Code 19029 19030 19031 19032

Each 18.94 34.14 37.47 132.91 132.91 132.91 275.13 275.13 275.13 275.13

Paving Gully c/w Grate with Horizontal Back Inlet Coupling Paving Gully

Code

Each

19316 19315 19314 19313

91.30 116.48 93.47 118.63

Complete with removable internal trap, DN100 coupling outlet and black polypropylene top incorporating 152 x 152 plastic grate and bristled slot 159 x 70mm to accept round or square downpipes (max 70mm). Top and base can be independently repositioned through 360°. Overall depth 385mm.

Product

Each 19.13 33.40 95.04 264.62

Code (Square) 19067 19068 19069 19074 19075 19076 19077 19078 19079 19080

Gullies & Hoppers

Bends

2

Code 19134 19138 19140

Junctions

Nitrile coupling available POA

Couplings - EPDM and Nitrile

DN 100-150 150-225 225-300

Code

Each

19318 19317

73.06 96.88

Complete with removable internal trap, DN100 coupling outlet and square black polypropylene top. Top and base can be independently repositioned through 360°. Overall depth 385mm.

Densleeve

Plain-end vitrified clay sewer pipes & fittings with sleeve joints to BS EN 295 15% of our Clayware products are made from recycled material.

Code

Each

19332 19333

73.06 96.88

Product Rainwater Gully c/w Grate with Horizontal Back Inlet Coupling Rainwater Gully

P Traps Low Back P Gully

Complete with removable internal trap, DN100 coupling outlet and square black polypropylene top. Top and base can be independently repositioned through 360°. Overall depth 330mm.

Product Rectangular Hopper Assembly c/w Grate Rectangular Hopper Assembly c/w Sealing Plate Paving Hopper Assembly c/w Grate Rainwater Hopper Assembly c/w Grate

Code

Each

15073 15084 15074 15089

36.98 43.54 25.72 24.31

Code

Each

1.0 2.5

50001 50002

10.42 26.04

Saddles

Square 90°

100 100 100 150 150 225 225

Small (up to 200) Med. (up to 400) Large (over 400) Med. (up to 400) Large (over 400) Med. (up to 400) Large (over 400)

Size of Top

Code

Each

100

150x150

19204

23.26

Each 22.04 22.04 22.04 39.02 39.02 128.29 128.29

DN

Size of Top

Code

Each

100

150x150

19206

39.97

DN

Size of Top

Code

Each

100

150x150

19213

42.14

Rectangular (Back Inlet slot 122x160)

Supplied in plastic tubs and suitable for all types of push fit gravity pipe systems.

Square Code 19111 19115 19117 19123 19125 19130 19132

DN

Vertical 100mm Inlet

DN Pipe Size 100 150 225 300 375/400 450/500 15 10 Average No. of Joints per Kg. 100 50 30 24

Oblique Code 19087 19091 19093 19099 19101 19106 19108

18.85 43.16

Horizontal 100mm Inlet

Size (Kg)

DN Main

Each

19200 19201

Square

Universal Jointing Lubricant

DN

Code

100x100 150x150

Hoppers

Rectangular, Connect to DN100 or DN150 Densleeve with standard Densleeve Coupling. Use also with p/e raising piece onto: • low P trap p/e • Rest Bend p/e Paving & Rainwater Hopper Assembly

Oblique 45°

DN to DN

DN

Size of Top

Code

Each

100 150

335x205 335x205

19193 19194

32.64 65.09

Standard Raising Piece

150mm Square

Height (mm)

Code

Each

75 150 225 300

07366 07367 07368 07370

19.58 19.58 19.58 19.58

Grate (Square) for Hoppers and raising pieces - 152x152mm see page 12

3

Densleeve

Plain-end vitrified clay sewer pipes & fittings with sleeve joints to BS EN 295 15% of our Clayware products are made from recycled material.

Dished Tops Grate Size 125 178

Rodding Eye Point Outlet 100 150

Outside Dim. 254x254 305x305

Depth

Code

Each

100 100

07383 07385

14.68 66.20 33.62 73.85

Aluminium oval pattern with removable plate for rodding.

Grate for dished tops - see page 17

Dished Tops Square

Pack Quantity 50 30 32 N/A

Material

Dia (mm)

Code

Each

Polypropylene Polypropylene Polypropylene Polypropylene

100 150 225 300

15009 15010 15012 19133

9.14 17.78 37.25 61.96

Adaptors - To/From Denseal DN 100

150 Type 2 225

300

Type

Length

Code

Each

1 1a 2 1 1a 2 1 1a 2 1 1a 2

300 300 150 300 300 150 300 300 300 320 320 320

19141 19142 19149 19143 19144 19150 19145 19146 19151 19147 19148 19152

9.14 9.14 9.14 23.94 23.94 23.94 53.54 53.54 53.54 55.38 55.38 55.38

Type 1: Denseal Socket Plain Ended Type 1a: Socket Plain Ended Type 2: with Denseal Spigot Plain Ended

4

Connect With

Code

Each

Standard Coupling Standard Coupling

19033 19034

36.24 93.40

Polypropylene square pattern with removable plate for rodding. Ideal for use in paved areas. Connects to DN100 and DN150 pipe.

Stoppers

Type 1/1a

DN 100 150

DN

Connect With

Code

Each

100/150

Standard Coupling and 45° Bend

15085

31.46

Uni-Drain Connector Pack Qty

DN

Code

Each

25

100

15048

21.11

For round or square waste & rainwater pipes. Connects to any DN100 below ground drainage system. Nominal OD of downpipe: between 34-82mm round. Max 65mm square.

Other Connectors Pack Qty. 25 20 25 20 25 20

Nominal OD of Adaptor Pipe 110 For PVC-u soil and rainwater pipes 160 118 For underground cast-iron 173 123 Connects Densleeve to Supersleve 180 Purpose

N/A For connection to: N/A Twinwall - Plastic N/A surface water pipes

178 268 354

25 For Concrete Uni-Junction (Spigot adaptor to Densleeve)

Fig. No. DN

Code

Each

100 150 100 150 100 150

15021 15025 15024 15027 15034 15035

12.38 26.78 14.87 26.78 4.55 12.38

DC150TD 150 15057 DC225TD 225 15055 DC300TD 300 15056

12.01 22.62 44.87

150 15049

12.01

DC6 DC7 DC9 DC9a DC10 DC15

DC18

Plain-end vitrified clay sewer pipes & fittings with sleeve joints to BS EN 295

Densleeve

15% of our Clayware products are made from recycled material.

Densleeve Access

Plastic Inspection Chambers Cover & Frame

Sealing Plate & Frame Alloy Access Size

Code

Each

DN

Code

Each

250x150

60025

POA

450

15003

121.62

Light duty Polypropylene, Dual Lock Cover & Frame. Test Load 35kN

Oval Raising Piece

Raising Piece

Access Size

Code

Each

250x150

07511

POA

DN

Code

Each

470

15063

51.55

DN470 Upstand x 215 deep with fitted seal.

Access Pipe Oval opening Access Size

DN

Code

Each

250x150 250x150

100 150

19154 19156

POA POA

Base Unit DN

Code

Each

470

15062

91.72

DN470 Base Unit x 240 deep. 5 x DN100 Inlets 1 x DN100 Outlet Suitable for direct connection to the Densleeve system. Base Unit & 3 Raising Pieces & Cover = 945 Overall Depth.

Universal Manhole Dia (mm)

Depth (mm)

Code

Each

250

600

15087

136.75

Polypropylene Mini Access Chamber Complete unit with cover and frame. 3 x DN100 Inlets 1 x DN100 Outlet

DenCon Connector

PPIC Inlet Adaptor Converts DN110 chamber inlets to DN100 Densleeve DN

Code

Each

100

15072

4.81

Denrod 500 DN500 Chamber x 1000 deep. 100% recycled material

DN

Code

Each

DN

Code

Each

150

40075

38.50

500

15008

267.97

Two piece flexible saddle suitable for connecting DN150 lateral pipes to concrete or clay.

Three inlets providing either DN100 or DN150 connections and one DN150 outlet. Use Code 15003 - Cover and Frame for Light Duty applications.

5

Denseal

Vitrified clay spigot and socket pipes & fittings with polyester joints to BS EN 295.

Lubricant shown on page 3. Clay Pipes sold only by pack into stock. 15% of our Clayware products are made from recycled material.

Pipes

Standard and Short Lengths

Junctions Pack Qty. 20 12 6 6 6 4 4

DN

225 300 375 400 450 500 600

Standard Price/m Length (m) Code Metre Length 1.75 10080 64.42 0.6 1.6 10036 100.68 0.6 2.0 10048 POA 0.6 2.0 10051 POA 0.6 2.0 10060 POA 0.6 2.0 10066 POA 0.6 1.85 10037 POA 0.6

Short Code Each 10021 96.64 10032 151.01 POA 10038 10045 POA 10053 POA 10062 POA 10052 POA

Spigot/Plain-end and Socket Plain-end also available. Priced as short lengths. Lengths other than those quoted are available on request.

Oblique 45°

Curved Square 90°

Bends DN 225 300 375 400 450 500

90° 12004 12006 12007 12008 12009 12243

Codes 45° 22½° 12022 12013 12024 12015 12025 12016 12026 12017 12027 12018 12028 12250

11¼° 12032 12034 12035 12036 12037 12245

Each 128.82 254.26 POA POA POA POA

Large diameter junctions DN375 and above are supplied as square 90°.

DN (Main)

DN (Arm)

225 225 225 300 300 300 375 375 375 375 400 400 400 400 450 450 450 450 450

100 150 225 150 225 300 150 225 300 375 150 225 300 400 150 225 300 375 450

Code (Oblique) 12051 12052 12053 12058 12059 12060 12062 12064 12065 12066 12068 12069 12070 12071 12073 12074 12075 12076 12077

Code (Square) 12108 12109 12110 12112 12113 12253 12116 12117 12118 12119 12120 12242 12122 12123 12124 12125 12126

Each 193.78 193.78 193.78 399.47 399.47 399.47 POA POA POA POA POA POA POA POA POA POA POA POA POA

All 500mm and 600mm Junctions POA.

Adaptors - To/From Denseal Type 1/1a

Type 1: Denseal Socket Plain Ended Type 1a: Socket Plain Ended Type 2: with Denseal Spigot Plain Ended

Type 2

6

See page 4

Vitrified clay spigot and socket pipes & fittings with polyester joints to BS EN 295.

Lubricant shown on page 3. Clay Pipes sold only by pack into stock. 15% of our Clayware products are made from recycled material.

Rest Bends

Tumbling Bay Junction

90°

Denseal

DN (Main)

DN (Arm)

Code

Each

DN

Code

Each

225 300 375 400 450

225 300 375 400 450

12177 12181 12184 12186 12188

193.78 399.47 POA POA POA

225 300

12040 12042

178.63 378.98

90°

Saddles Oblique 45°

DN Saddle 225 225

DN Main Medium Large

Code (Oblique) 13223 13225

Code (Square) 13260 13262

Each 149.23 149.23

Specify Medium for barrel sizes up to 400mm. Large for barrel sizes over 400mm.

Square 90°

Taper Increasers

Flow

DN Socket 150 225 300

DN Spigot 225 300 375

Code

Each

12210 12211 12212

POA 303.32 471.79

7

Channels

Vitrified clay channel pipes & fittings Manufactured in accordance with BS EN295

(Half section unless otherwise stated). 15% of our Clayware products are made from recycled material.

Pipes - Socketed

Tapers - Socketed Continued

Length

DN

Code

Each

1.0 1.0 1.0 1.0 1.0 1.0

150 225 300 375 400 450

05008 05052 05053 05054 05060 05056

18.49 41.70 79.33 POA POA POA

100 150 225 300 375 400 450 DN LH

RH FLOW

100 150 225 300 375 400 450

8

Reducer

Code

Each

150-100 225-150 300-225 375-300 450-375

09476 09477 09478 09479 09480

53.37 118.34 234.26 POA POA

Reducer

90° 09001 09002 09004 09006 09007 09008 09009

LH Codes 22½° 45° 09035 09053 09036 09054 09038 09056 09040 09058 09041 09059 09042 09060 09043 09061

90° 09010 09011 09012 09014 09015 09016 09017

RH Codes 22½° 45° 09044 09062 09045 09063 09047 09065 09049 09067 09050 09068 09051 09069 09052 09070

Oblique 11¼° 09071 09073 09077 09081 09083 09085 09087 11¼° 09072 09074 09078 09082 09084 09086 09088

Each 10.87 18.02 60.55 123.52 POA POA POA Each 10.87 18.02 60.55 123.52 POA POA POA

Single, left or right handed

Curved Square Single, left or right handed

DN to DN

Code

Each

100-150 150-225 225-300 300-375 375-450

09471 09472 09473 09474 09475

53.57 118.34 234.26 POA POA

DN Main 100 150 150 225 225 225 300 300 300 300

DN LH Code LH Code RH Code RH Code Arm Oblique Square Oblique Square 09319 09320 09403 100 09402 09321 09322 09405 100 09404 09323 09324 09407 150 09406 09325 09326 09409 100 09408 09327 09328 09411 150 09410 09329 09330 09413 225 09412 09331 09332 09415 100 09414 09333 09334 09417 150 09416 09335 09336 09419 225 09418 09337 09338 09421 300 09420

Each 22.07 36.25 36.25 103.73 103.73 103.73 246.83 246.83 246.83 246.83

Junctions - Socketed Breeches Oblique 45°

Tapers - Socketed Increaser

DN to DN

Junctions - Socketed

Bends - Socketed DN

Increaser

Double Oblique 45°

DN

DN Arm

100 150 225 225 300

100 150 150 225 300

Code Double 09445 09447 09449 09450 09454

Code Breeches 09301 09303 09305 09306 09309

Each 33.00 55.09 176.80 279.24 392.15

A channel is a LEFT HAND fitting when viewed from the spigot towards socket (ie. Against the direction of flow), the socket projects to the LEFT. Similarly when the socket projects to the RIGHT the channel is a RIGHT HAND fitting.

(Half section unless otherwise stated). 15% of our Clayware products are made from recycled material.

Section Bends - Socketed

50°

CL

DL

CR

DR

70°

EL

ER

90°

115°

FL LH

FR RH

DIRECTION OF FLOW

¾ Section

Tapers - Butt

DN

Type

LH Code

RH Code

100 100 100 100 150 150 150 150 225 225 225 225

C D E F C D E F C D E F

09093 09095 09097 09099 09109 09111 09113 09115 09125 09127 09129 09131

09094 09096 09098 09100 09110 09112 09114 09116 09126 09128 09130 09132

DN to DN

Each 25.02 25.02 25.02 25.02 38.02 38.02 38.02 38.02 160.22 160.22 160.22 160.22

A channel is a LEFT HAND fitting when viewed from the spigot towards socket (ie. Against the direction of flow), the socket projects to the LEFT. Similarly when the socket projects to the RIGHT the channel is a RIGHT HAND fitting

100 - 150 150 - 225 225 - 300 Increaser / Reducer

Each 29.09 118.35 234.26

Junctions - Butt Curved Square

Oblique

Winser

Pipes - Butt Length

DN

Code

Each

1.0 1.0 1.0 1.0 1.0 1.0 1.0

100 150 225 300 375 400 450

05057 05058 05059 05039 05041 05043 05047

9.04 16.20 37.96 77.03 POA POA POA

Kenon

DN Main 100 150 150 225 225 225

DN LH Code LH Code RH Code RH Code Arm Oblique Square Oblique Square 100 09503 09533 09532 09504 100 09505 09531 09530 09506 150 09507 09528 09529 09508 100 09509 09549 09548 09510 150 09511 09537 09536 09512 225 09513 09539 09540 09514

Each 17.41 28.78 28.78 103.73 103.73 103.73

DN

Code

Each

100 150 225 300

09481 09482 09483 09484

144.22 208.12 614.89 1407.13

DN

Code

Each

100 150 225 300

09487 09488 09489 09490

144.22 208.12 614.89 1407.13

Other sizes also available on request.

Bends - Butt 100 150 225

Code 09527 09538 09544

Manhole Interceptors

Splayed Ends (also known as Winser or Barron Bends) These Branch Bends available LH or RH are designed to avoid splashing and fouling in the manhole.

DN

Channels

Vitrified clay channel pipes & fittings Manufactured in accordance with BS EN295

Codes 90° 09018 09019 09021

45° 09023 09024 09026

22½° 09027 09028 09030

11¼° 09031 09032 09034

Each 8.82 15.13 57.66

Reverse Action

DN

Code

Each

100 150

09493 09495

144.22 208.12

Interceptors supplied with 100mm Stoppers unless otherwise requested. Alternatives are: Black Sealing Plate and Frame, Lever Locking Stopper (see page 18).

9

Gullies

Road, Garage, Mud and Grease. A full range of vitrified clay Special Gullies for use as interceptors of grease, oil, petrol, mud etc. 15% of our Clayware products are made from recycled material.

Clay and Plastic

Road Gullies Vitrified Clay Road Gully with Rodding Eye

Road Gullies Continued Internal Depth 610 610 760 915

DN Internal 300 300 375 450

DN Outlet 100 150 150 150

Code

Each

07536 07537 07545 07556

178.45 178.45 221.42 314.53

Outlet Adapter

OD (mm)

Code

Box Qty.

Each

160/178*

67012

20

12.22

*Reversible

(Other non standard sizes may be available - contact Sales Office for details)

To fit Gully DN

Code

Each

375 450

60081 60082

244.30 271.32

Buckets for Road and Silt Gullies

Ribbed HDPE Road Gully

DN Internal 450 450 450 450 375

Internal Depth 900 900 750 750 750

DN Outlet 178 160 160 178 178

Code

Each

67003 67004 67005 67009 67002

111.47 111.47 107.10 107.10 106.25

Supplied complete with internal trap & rodding eye. 100% recycled material

HDPE Yard Gully Dia. (mm) 300

H (mm) 600

DN 110

Code 67006

Each 110.36

Grease Interceptors Canteen Grease Interceptor 610mm deep x 100mm in and out

DN Internal 400

Internal Depth 200

DN Outlet 150

Code

Each

67001

145.39

Overall depth - 400mm DOT approved Low cost sumpless Gully Chamber, designed for use in highway drainage systems incorporating catchpits. 100% recycled material

10

49 Litres

600x460 98 Litres *vertical inlet is also available

Code

Item Interceptor S/S Insp. Cover & Frame Horizontal Inlet* 140 Sealing Plate Tray Complete Item Interceptor S/S Insp Cover & Frame Horizontal Inlet* 140 Sealing Plate Tray Complete Item

07494 59021 07496 60017 60072 07495 59022 07496 60017 60073

Each 1191.25 218.23 63.53 27.49 195.74 1696.24 1582.84 228.68 63.53 27.49 228.13 2130.67

Gullies Dean’s Gully with Rodding Eye

100% recycled material

HDPE Gully Chute

Internal Size 460x300

610mm deep For grates see page 12

Silt Bucket

DN Internal 150 225 225 300 300 Inlets (any size)

DN Outlet 100 100 150 100 150

Code

Each

07439 07441 07443 07444 07446

130.45 223.70 223.70 278.02 278.02 116.59

To fit Gully DN

Code

Each

150 225 300

60074 60075 60076

72.36 76.00 84.11

Gullies

Clay, Plastic and Concrete

Gullies Continued Grease/Mud Gully with Rodding Eye 375mm deep

Top Size 150x150 225x225 225x225 Inlets (either size)

Garage Gullies Continued DN Outlet 100 100 150

Code 07466 07469 07475

Each

Filter Bucket for Versatile Gullies

117.78 194.74 223.70 116.59

To fit Gully, DN

Code

Each

225 300

60079 60080

80.29 97.56

The Filter Bucket is generally used for Garage Gullies, although the Silt Bucket may also be used.

For grates see page 12

Silt Bucket for Mud Gullies

To fit Gully, Top Size

Code

Each

150x150 225x225

60077 60078

50.23 80.29

Vitrified Clay Ducting Pipes

Denduct

Denduct Pipes Denduct

Garage Gullies Versatile Gully Round/Square Top with Rodding Eye, fitted with plastic stopper.

DN DN Internal Outlet 225 100 225 150 300 100 300 150 Inlets (either size)

Code (Round) 07478 07480 07483 07492

Code (Square) 07568 07569 07570 07571

dense vitrified clay plain-ended pipes

Each

Pack Quantity 79 41

Length (m) 1.6 1.75

DN

Code

100 150

31001 31005

Price per m POA POA

Denduct Pipes may be subject to minimum order quantities and lead times. Clay Pipes sold only by pack into stock. 15% of our Clayware products are made from recycled material.

195.66 195.66 229.78 229.78 116.59

Fittings - Use Densleeve fittings and couplings

For grates see page 12

Vitrified Clay Perforated Pipes for Land Drainage

Denline

610mm deep

Denline Perforated Pipes Denline vitrified clay plainended perforated pipes

Pack Quantity 41 20 12

Length (m) 1.75 1.75 2.00

DN

Code

150 225 300

25009 25001 25008

Price per m POA POA POA

Denline Pipes may be subject to minimum order quantities and lead times. Plain-end vitrified clay perforated pipes with sleeve joints with unperforated fittings, to BS EN295. Clay pipes sold only by pack into stock.

Fittings - Use Densleeve fittings and couplings

11

Metal Work

For use with Naylor Vitrified Clay, Pipes and Fittings

Supplied in black coated Grey Iron or Cast Alloy as indicated. All Castings manufactured to BS EN124

Sealing Plates and Frames

Gully Grates Circular all black finish

Square all black finish

Dimensions

Code

Each

140 (for DN100 Socket) 191 (for DN150 Socket) 267 (for DN225 Gully & 335x335 Dish Top) 284 (for DN225 Garage, Deans & Gullies with Rebate Top) 368 (for DN300 Garage, Deans & Gullies with DN300 Rebate Top) 125 (for 254x254 Dish Top) 178 (for 305x305 Dish Top)

60033 60039 60042

8.84 138.98 12.91 138.98 34.40 172.45 244.96 35.60

60044 60046

66.62

60031 60037

8.63 8.84

Dimensions

Code

Each

152x152 229x229 305x305

60026 60028 60105

8.84 30.70 58.91

Circular

Dimensions

Code

Each

140 (for DN100 Socket) 191 (for DN150 Socket) 273 (for DN225 Socket) 368 (for DN300 Socket)

60017 60019 60021 60023

27.49 138.98 44.46 138.98 69.25 172.45 148.20 244.96

Dimensions

Code

Each

152x152 - Also available in Alloy 229x229

60011 60013

35.60 56.68

Dimensions

Code

Each

Nom. 254x150 (for Oval Access on Access Pipes, Bends & Junctions)

60025

138.98 POA 138.98 172.45 244.96

All black finish

Square

Oval

All black finish

Alloy finish

Pipe Flap Valve Hinged Locking Grates & Frames Circular all black finish

Square all black finish

12

Dimensions

Code

Each

140(for DN100 Socket) 191(for DN150 Socket) 273(for DN225 Socket) 368(for DN300 Socket)

60054 60056 60059 60061

39.76 138.98 69.25 138.98 131.81 172.45 274.22 244.96

Dimensions

Code

Each

152x152 229x229 305x305 229x229 (Lift out Pattern to facilitate removal of Bucket on Mud Gullies) Fig. 414L

60048 60051 60053 60050

38.36 138.98 80.50 138.98 199.22 172.45 101.80 244.96

DN

Code

Each

100 150 225 300

19336 19337 19338 19339

106.37 160.30 402.67 785.86

Fitted with Galvanised Iron Flap. NB. Not suitable for tidal conditions. Suitable for connection to Densleeve with a standard pipe Coupling or to other pipe materials with a Band-Seal Coupling.

Lever Locking Stopper Dimensions

Code

Each

140 (for DN100 Socket) 191 (for DN150 Socket) 267 (for DN225 Socket)

60068 60069 60070

POA 138.98 POA 138.98 POA 172.45 244.96

With chain and staple. Cement mortar jointed into type 1a Plain Socket adaptor - See page 4.

Flexible Couplings

A range of versatile, flexible couplings consisting of moulded synthetic elastomeric sleeves and stainless steel clamping bands

Couplings Standard Coupling Range also available as a Chemical Coupling (Ref NSCC) Prices on application

Min OD 100 105 110 120 125 130 140 150 160 175 190 200 225 250 265 285 300 305 315 340 355 385 400 405 420 435 445 465 480 495 510 520 530 555 570 590 665 765

Band-Seal

Large Standard Couplings Max OD Coupling Ref. NSC 115 115 NSC 121 121 NSC 125 125 NSC 137 137 NSC 142 142 NSC 150 150 NSC 165 165 NSC 175 175 NSC 182 182 NSC 200 200 NSC 215 215 NSC 225 225 NSC 250 250 NSC 275 275 NSC 290 290 NSC 310 310 NSC 320 320 NSC 335 335 NSC 345 345 NSC 365 365 NSC 385 385 NSC 412 412 NSC 425 425 NSC 430 430 NSC 445 445 NSC 465 465 NSC 475 475 NSC 495 495 NSC 510 510 NSC 525 525 NSC 540 540 NSC 550 550 NSC 560 560 NSC 580 580 NSC 600 600 NSC 620 620 NSC 690 690 NSC 790 790

Code 76001 76002 76003 76004 76005 76006 76236 76007 76008 76009 76010 76011 76012 76013 76014 76015 76016 76017 76018 76019 76020 76021 76022 76023 76024 76025 76026 76027 76028 76029 76030 76238 76031 76032 76033 76237 76034 76035

Box Qty. 20 20 20 20 12 12 12 10 10 10 8 6 6 6 5 3 3 3 4 4 4 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Each 27.85 32.07 34.07 36.78 55.81 40.88 40.88 42.69 44.08 46.79 56.82 58.82 60.82 62.43 62.43 85.69 88.10 92.09 94.11 96.12 98.71 105.72 109.24 110.11 112.53 115.73 117.72 119.75 122.76 125.76 128.78 129.25 132.58 138.60 150.81 163.33 204.93 237.50

As these items are made to order, please specify dimensions required when ordering.

Min OD

Max OD

601 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 3000

699 799 899 999 1099 1199 1299 1399 1499 1599 1699 1799 1899 1999 3000 4000

Coupling Ref. NSC 601 NSC 700 NSC 800 NSC 900 NSC 1000 NSC 1100 NSC 1200 NSC 1300 NSC 1400 NSC 1500 NSC 1600 NSC 1700 NSC 1800 NSC 1900 NSC 2000 NSC 3000

Code

Each

76036 76037 76038 76039 76040 76041 76042 76043 76044 76045 76046 76047 76048 76049 -

POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA

Code

Each

76449 76452 76453 76454 76455 76456 76446 76460 76461 76462 76463 76464 76465 76466

POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA

Extra Wide Band-Seal Couplings 300mm Wide Band-Seal Couplings

Min OD

Max OD

200 265 285 300 305 315 340 355 385 400 405 420 435 445 465 480

225 290 310 320 335 345 365 385 412 425 430 445 465 475 495 510

Coupling Ref. NWC 225 NWC 290 NWC 310 NWC 320 NWC 335 NWC 345 NWC 365 NWC 385 NWC 412 NWC 425 NWC 430 NWC 445 NWC 465 NWC 475 NWC 495 NWC 510

13

Band-Seal

Flexible Couplings

Extra Wide Band-Seal Couplings Continued Min OD

Max OD

495 510 520 530 555 570 590 665 765

525 540 550 560 580 600 620 690 790

Coupling Ref. NWC 525 NWC 540 NWC 550 NWC 560 NWC 580 NWC 600 NWC 620 NWC 690 NWC 790

Bushes Continued

Code

Each

76447 76467 76468 76469 76470 76471 76472 76473 76474

POA POA POA POA POA POA POA POA POA

Also available in larger diameters to suit specific customer requirements. Please specify dimensions required.

16

Fabricated Made to suit customers’ individual requirements. Thicknesses: 8, 16, 24 and 32mm.

24

Bushes 8

Fabricated Made to suit customers’ individual requirements. Thicknesses: 8, 16, 24 and 32mm.

14

OD Between

Bush Ref.

Code

Each

170-199 200-299 300-399 400-499 500-599 600-699 700-799 800-899 900-999 1000-1099 1100-1199 1200-1299 >1300

BC 0801 BC 0802 BC 0803 BC 0804 BC 0805 BC 0806 BC 0807 BC 0808 BC 0809 BC 0810 BC 0811 BC 0812 -

76169 76170 76171 76172 76173 76174 76175 76176 76177 76178 76179 76180 -

11.88 16.64 21.68 26.50 30.73 34.97 39.22 45.60 51.93 59.36 65.70 72.06 POA

£200.00 nett Carriage Paid

32

OD Between

Bush Ref.

Code

Each

190-199 200-299 300-399 400-499 500-599 600-699 700-799 800-899 900-999 >1000

BC 1601 BC 1602 BC 1603 BC 1604 BC 1605 BC 1606 BC 1607 BC 1608 BC 1609 -

76182 76183 76184 76185 76186 76187 76188 76189 76190 -

21.05 30.48 39.90 49.20 57.62 65.92 74.26 84.22 94.19 POA

OD Between

Bush Ref.

Code

Each

250-299 300-399 400-499 500-599 600-699 700-799 800-899 900-999 >1000

BC 2402 BC 2403 BC 2404 BC 2405 BC 2406 BC 2407 BC 2408 BC 2409 -

76196 76197 76198 76199 76200 76201 76202 76203 -

37.47 47.85 57.81 75.16 93.01 108.68 127.18 145.67 POA

OD Between

Bush Ref.

Code

Each

400-499 500-599 600-699 700-799 800-899 900-999 >1000

BC 3204 BC 3205 BC 3206 BC 3207 BC 3208 BC 3209 -

76209 76210 76211 76212 76213 76214 -

88.65 105.20 125.26 138.75 157.36 179.51 POA

£200.00 nett Carriage Paid

Flexible Couplings

Adaptor Couplings Pipe 1 OD 97-102 100-115 100-115 100-115 115-122 110-122 110-125 121-136 121-137 121-136 122-137 130-145 137-152 144-160 144-160 153-168 155-176 155-170 166-181 166-181 170-192 170-192 170-192 180-198 180-200 180-200 180-200 180-200 183-198 185-216 185-212 190-206 190-206 190-215 316 Stainless Steel 200-225 bands or Nitrile bodies 210-235 are available on all of 210-235 the opposite to 210-235 special order. Also available as a Chemical Coupling (Ref NACC) Prices on application

Pipe 2 OD 86-91 40-50 50-64 75-90 61-68 80-95 100-115 80-95 110-121 100-115 75-90 110-125 100-115 110-122 121-136 100-115 110-125 130-145 100-115 110-125 110-122 121-136 144-160 130-145 122-137 110-121 155-170 160-180 100-115 160-180 100-115 100-115 138-153 150-165 160-175 110-122 121-136 144-160

Band-Seal

Adaptor Couplings Continued Coupling Ref. NAC 1000 NAC 1001 NAC 1002 NAC 1003 NAC 1004 NAC 1101 NAC 1102 NAC 1211 NAC 1212 NAC 1213 NAC 1221 NAC 1302 NAC 1371 NAC 1442 NAC 1443 NAC 1531 NAC 1552 NAC 1553 NAC 1661 NAC 1662 NAC 1704 NAC 1705 NAC 1706 NAC 1800 NAC 1801 NAC 1802 NAC 1803 NAC 1804 NAC 1831 NAC 1851 NAC 1852 NAC 1901 NAC 1903 NAC 1904 NAC 2001 NAC 2102 NAC 2103 NAC 2104

Code 76484 76063 76064 76065 76486 76066 76067 76068 76069 76070 76071 76073 76074 76075 76076 76078 76080 76081 76082 76083 76084 76085 76086 76087 76088 76089 76090 76091 76092 76093 76094 76095 76097 76098 76099 76101 76102 76103

Box Qty. N/A N/A N/A N/A N/A 20 20 20 20 20 20 20 20 10 10 10 10 20 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 6

Each 21.14 21.69 23.31 26.46 16.15 16.52 17.34 17.34 17.34 17.69 24.43 21.53 22.72 21.48 27.85 45.45 25.86 25.86 48.86 48.86 26.95 30.27 30.27 30.31 49.43 49.43 29.17 31.15 31.15 31.15 32.14 32.14 35.20 35.27 33.47 35.97 37.28 39.99

Pipe 1 OD 210-235 210-235 240-265 240-265 240-265 240-265 250-275 260-285 260-285 265-290 265-290 295-320 295-320 295-320 295-320 295-320 301-316 310-335 335-360 335-360 335-360 316 Stainless Steel 360-385 bands or Nitrile bodies 360-385 are available on all of 360-385 the opposite to 360-376 special order. 395-420 395-420 Also available as a Chemical Coupling (Ref NACC) Prices on application

Pipe 2 OD 170-192 190-215 144-160 170-192 190-215 210-235 190-220 180-205 240-265 144-160 210-235 144-160 170-192 210-235 240-265 265-290 259-274 180-205 240-265 265-290 295-320 240-265 265-290 300-325 323-337 240-265 265-290

Coupling Ref. NAC 2105 NAC 2106 NAC 2404 NAC 2405 NAC 2406 NAC 2407 NAC 2502 NAC 2601 NAC 2602 NAC 2658 NAC 2659 NAC 2954 NAC 2955 NAC 2957 NAC 2958 NAC 2959 NAC 3011 NAC 3101 NAC 3358 NAC 3359 NAC 3350 NAC 3601 NAC 3602 NAC 3603 NAC 3604 NAC 3958 NAC 3959

Code 76104 76105 76109 76110 76111 76112 76114 76115 76116 76119 76120 76121 76122 76123 76124 76125 76126 76127 76129 76130 76128 76131 76132 76133 76134 76135 76136

Box Qty. 6 6 6 6 6 6 6 6 6 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3

44.61 47.11 49.49 49.49 55.01 55.01 64.01 51.51 59.13 59.13 59.13 63.15 65.16 67.14 73.36 73.36 88.64 65.16 75.78 77.35 77.35 85.38 85.38 85.38 91.78 91.78 91.78

Box Qty. -

31.27 62.13 87.97

Each

Adaptor Couplings For structured wall plastic pipes.

Pipe 1 OD 160-170 240-250 325-335

Pipe 2 OD 170-192 260-285 360-385

Coupling Ref. NACUR 150 NACUR 225 NACUR 300

Code 76239 76240 76241

Each

15

Band-Seal

Flexible Couplings

Pipe Couplings Min OD 100 110 120 135 150 160 170 180 200 210 235 260

End Caps Coupling Ref. NPC 115 NPC 125 NPC 135 NPC 150 NPC 165 NPC 175 NPC 185 NPC 195 NPC 215 NPC 225 NPC 250 NPC 275

Max OD 115 125 135 150 165 175 185 195 215 225 250 275

Code 76052 76053 76054 76055 76242 76056 76057 76058 76059 76371 76372 76370

Box Qty. 20 20 20 20 10 10 10 10 8 6 6 6

Each 13.39 15.43 15.43 20.23 23.72 23.72 23.72 23.72 26.60 27.90 29.55 31.78

Plumbing Range Couplings

Adaptors

16

Min OD

Max OD

24 32 40 50 70 80

32 40 50 65 85 95

Min OD

Max OD

32-40 40-50 50-65 59-64 75-90 75-90

24-32 32-40 35-42 70-75 40-50 50-64

Coupling Ref. NPC 32 NPC 40 NPC 50 NPC 65 NPC 85 NPC 95

Code

Each

76343 76344 76345 76050 76289 76051

11.50 11.50 11.50 12.14 13.29 13.63

Coupling Ref. NAC 0301 NAC 0401 NAC 0501 NAC 0601 NAC 0751 NAC 0752

Code

Each

76337 76335 76060 76485 76061 76062

14.31 14.31 14.31 16.94 18.47 18.94

Min-Max OD 45-55 56-66 80-90 105-115 155-165 205-215

Coupling Ref. NEC 45 NEC 56 NEC 80 NEC 105 NEC 155 NEC 205

Code

Each

76153 76154 76155 76156 76157 76158

5.02 6.00 6.71 11.53 18.54 31.59

Installation Tools Description 8mm Nut Driver 8mm Ratchet Spanner

Ref.

Code

Each

T0001 T0002

76167 76168

15.00 32.97

MetroDrain Systems

HDPE Twinwall Carrier / Filter Drainage Systems Twinwall pipes sold only in full packs into stock.

MetroDrain Sealing Rings

MetroDrain Pipes ID Description (mm) Unperf 150 Unperf 225 Unperf 300 Unperf 375 s/s Unperf 450 s/s Unperf 600 s/s

Length (m) 6 6 6 6 6 6

Pack Qty. 33 14 9 5 4 24/Load

Code

Each

71302 71303 71304 71355 71356 71357

46.00 104.08 165.52 399.32 497.32 774.40

ID (mm) 150 225 300 375 s/s 450 s/s 600 s/s

Length (m) 6 6 6 6 6 6

Pack Qty. 33 14 9 5 4 24/Load

Code

Each

71312 71313 71314 71365 71366 71367

48.88 107.44 174.24 406.56 545.72 851.84

ID (mm) 150 225 300

Length (m) 6 6 6

Pack Qty. 33 14 9

Code

Each

Description Perf Perf Perf Perf Perf Perf Description Half Perf* Half Perf* Half Perf*

71322 71323 71324

Description BBA BBA BBA BBA BBA BBA

49.36 BBA 109.40 BBA 176.68 BBA

MetroDrain Couplings Coupling Coupling Coupling Coupling Coupling Coupling

ID (mm) 150 225 300 375 450 600

Pack Qty. 1 1 1 1 1 1

Code

Each

71332 71333 71334 71335 71336 71337

6.76 11.40 23.32 66.00 79.20 101.20

Pack Qty. 1 1 1 1 1 1

Code 71342 71343 71344 71345 71346 71347

Each 3.16 6.28 9.68 16.96 17.46 39.68

BBA BBA BBA BBA BBA BBA

MetroDrain Bends BBA BBA BBA BBA BBA BBA

*Subject to minimum quantities and lead time. 150mm-300mm Pipe Plain Ended, Couplings and Seals sold separately. 375mm-600mm Pipe Single Socket, Seals sold separately.

Description

Sealing Ring Sealing Ring Sealing Ring Sealing Ring Sealing Ring Sealing Ring

ID (mm) 150 225 300 375 450 600


ID (mm) 150 150 150 150 225 225 225 225 300 300 300 300 375* 375* 375* 375* 450* 450* 450* 450* 600* 600* 600* 600*

Bend°

Code

Each

11¼ 22½ 45 90 11¼ 22½ 45 90 11¼ 22½ 45 90 11¼ 22½ 45 90 11¼ 22½ 45 90 11¼ 22½ 45 90

71502 71512 71522 71532 71503 71513 71523 71533 71504 71514 71524 71534 71505 71515 71525 71535 71506 71516 71526 71536 71507 71517 71527 71537

36.32 36.32 36.32 38.72 101.64 101.64 101.64 101.64 183.92 183.92 183.92 183.92 POA POA POA POA POA POA POA POA POA POA POA POA

BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA

Requires sealing rings on all sealed systems. *Subject to minimum order quantities and carriage if purchased in single units.

17

MetroDrain Systems

HDPE Twinwall Carrier / Filter Drainage Systems

MetroDrain Junctions 90°


ID (mm) 150 x 150 225 x 150 225 x 225 300 x 150 300 x 225 300 x 300 375 x 150* 375 x 225* 375 x 300* 375 x 375* 450 x 150* 450 x 225* 450 x 300* 450 x 375* 450 x 450* 600 x 150* 600 x 225* 600 x 300* 600 x 375* 600 x 450* 600 x 600*

MetroDrain Junctions Continued

Description

Code

Each

T T T T T T T T T T T T T T T T T T T T T

71606 71614 71616 71624 71626 71628 71634 71636 71638 71640 71644 71646 71648 71650 71652 71664 71666 71668 71670 71672 71674

62.92 145.20 159.72 222.64 256.52 319.44 POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA

Description

Code

Each

Y Y Y Y Y Y Y Y Y Y Y Y

71605 71613 71615 71623 71625 71627 71633 71635 71637 71639 71643 71645

62.92 188.76 266.20 266.20 300.08 387.20 POA POA POA POA POA POA

45° BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA


Requires sealing rings on all sealed systems.

18

*Subject to minimum order quantities and carriage if purchased in single units.

ID (mm) 150 x 150 225 x 150 225 x 225 300 x 150 300 x 225 300 x 300 375 x 150* 375 x 225* 375 x 300* 375 x 375* 450 x 150* 450 x 225*

BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA

Description

Code

Each

Y Y Y Y Y Y Y Y Y

71647 71649 71651 71663 71665 71667 71669 71671 71673

POA POA POA POA POA POA POA POA POA

BBA BBA BBA BBA BBA BBA BBA BBA BBA

MetroDrain Level Invert Reducers - Double Socket

MetroDrain Junctions 45°

ID (mm) 450 x 300* 450 x 375* 450 x 450* 600 x 150* 600 x 225* 600 x 300* 600 x 375* 600 x 450* 600 x 600*


ID (mm)

Code

Each

225 x 150 300 x 150 300 x 225 375 x 150* 375 x 225* 375 x 300* 450 x 150* 450 x 225* 450 x 300* 450 x 375* 600 x 150* 600 x 225* 600 x 300* 600 x 375* 600 x 450*

71703 71705 71706 71708 71709 71710 71712 71713 71714 71715 71717 71718 71719 71720 71721

45.78 58.67 67.86 POA POA POA POA POA POA POA POA POA POA POA POA

N-Drain Agricultural Twinwall

HDPE Twinwall Carrier / Filter Drainage Systems. Twinwall pipes sold only in full packs into stock.

N-Drain Sealing Rings

N-Drain Pipes Description Unperf Unperf Unperf Unperf Unperf Unperf Unperf

Description Perf Perf Perf Perf Perf Perf Perf

ID (mm) 100 150 225 300 375 450 600

Length (m) 6 6 6 6 6 6 6

Pack Qty. 85 33 14 9 5 4 24/Load

ID (mm) 100 150 225 300 375 450 600

Length (m) 6 6 6 6 6 6 6

Pack Qty. 85 33 14 9 5 4 24/Load

Code

Each

71107 71077 71076 71075 71117 71118 71093

33.25 41.40 96.80 150.88 377.52 462.24 696.96

Code

Each

71108 71078 71080 71079 71119 71120 71121

34.73 44.04 99.24 159.72 382.36 491.28 774.40

Description Sealing Ring Sealing Ring Sealing Ring Sealing Ring Sealing Ring Sealing Ring Sealing Ring

N-Drain Couplings Coupling Coupling Coupling Coupling Coupling Coupling Coupling

ID (mm) 100 150 225 300 375 450 600

Pack Qty. 1 1 1 1 1 1 1

Pack Qty. 1 1 1 1 1 1 1

Code

Each

71001 71002 71013 71017 71023 71006 71096

2.41 3.16 6.28 9.68 16.96 17.46 39.68

N-Drain Bends

150mm-600mm Pipe Plain Ended, Couplings and Seals sold separately.

Description

ID (mm) 100 150 225 300 375 450 600

Code

Each

71085 71084 71074 71041 71098 71097 71044

4.94 6.76 11.40 23.32 66.00 79.20 101.20


ID (mm) 100 100 100 100 150 150 150 150 225 225 225 225 300 300 300 300 375* 375* 375* 375* 450* 450* 450* 450* 600* 600* 600* 600*

Bend°

Code

Each

11¼ 22½ 45 90 11¼ 22½ 45 90 11¼ 22½ 45 90 11¼ 22½ 45 90 11¼ 22½ 45 90 11¼ 22½ 45 90 11¼ 22½ 45 90

71401 71402 71403 71404 71223 71224 71227 71228 71064 71060 71052 71061 71055 71054 71056 71057 71141 71142 71143 71144 71145 71146 71147 71148 71149 71150 71151 71152

31.96 31.96 31.96 33.88 91.96 91.96 91.96 91.96 130.68 130.68 130.68 130.68 164.56 164.56 164.56 164.56 POA POA POA POA POA POA POA POA POA POA POA POA

19

N-Drain Agricultural Twinwall N-Drain Junctions 90°


ID (mm) 100 x 100 150 x 100 150 x 150 225 x 100 225 x 150 225 x 225 300 x 100 300 x 150 300 x 225 300 x 300 375 x 150* 375 x 225* 375 x 300* 375 x 375* 450 x 150* 450 x 225* 450 x 300* 450 x 375* 450 x 450* 600 x 150* 600 x 225* 600 x 300* 600 x 375* 600 x 450* 600 x 600*

N-Drain Junctions Continued Description

Code

Each

T T T T T T T T T T T T T T T T T T T T T T T T T

71406 71100 71221 71087 71010 71073 71237 71081 71071 71018 71168 71169 71170 71171 71172 71173 71210 71175 71176 71177 71178 71179 71180 71181 71182

42.02 55.68 55.68 130.68 130.68 130.68 203.28 203.28 240.80 300.08 POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA

45°


Requires sealing rings on all sealed systems.

20

*Subject to minimum order quantities and carriage if purchased in single units.

ID (mm) 100 x 100 150 x 100 150 x 150 225 x 100 225 x 150 225 x 225 300 x 100 300 x 150 300 x 225 300 x 300

Description

Code

Each

Y Y Y Y Y Y Y Y Y Y

71405 71083 71220 71103 71058 71016 71086 71019 71070 71072

42.02 55.68 55.68 169.40 169.40 246.84 246.84 246.84 283.16 363.00

Description

Code

Each

Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y

71069 71190 71191 71192 71193 71194 71195 71196 71105 71197 71198 71199 71200 71201 71202

POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA

N-Drain Level Invert Reducers - Double Socket

N-Drain Junctions 45°

ID (mm) 375 x 150* 375 x 225* 375 x 300* 375 x 375* 450 x 150* 450 x 225* 450 x 300* 450 x 375* 450 x 450* 600 x 150* 600 x 225* 600 x 300* 600 x 375* 600 x 450* 600 x 600*


ID (mm)

Code

Each

150 x 100 225 x 150 300 x 150 300 x 225 375 x 150* 375 x 225* 375 x 300* 450 x 150* 450 x 225* 450 x 300* 450 x 375* 600 x 150* 600 x 225* 600 x 300* 600 x 375* 600 x 450*

71204 71203 71101 71205 71206 71207 71208 71106 71209 71210 71211 71212 71213 71214 71215 71216

37.54 43.67 55.75 64.68 POA POA POA POA POA POA POA POA POA POA POA POA

Plastic Drainage

PVC-u Underground Gravity Sewer Fittings

Plastic Road Gullies - HDPE


Dia. (mm) 375 450 450 450 450

H (mm) 750 750 750 900 900

Fittings - BS EN1401-1

DN

Code

Each

178 160 178 160 178

67002 67005 67009 67004 67003

97.39 98.18 98.18 102.18 102.18

Couplings

Dia. (mm)

Length (m)

Code

Each

110 160 110 160

Coupler C/S Coupler C/S Coupler Slip Coupler Slip

72085 72086 72127 72126

8.18 14.74 8.18 14.74

Dia. (mm)

Angle

Code

Each

110 160 110 160 110 160 110 110 160

15º 15º 30º 30º 45º 45º 67º 87º 87º

72097 72098 72164 72096 72093 72094 72091 72089 72090

12.12 30.91 12.12 30.91 12.66 32.18 12.66 12.66 32.82

Dia. (mm)

Angle

Code

Each

15º 15º 30º 30º 45º 45º 87º 87º

72159 72198 72162 72163 72104 72105 72102 72120

13.90 32.74 13.90 32.74 14.65 32.74 15.16 34.11

Gully Outlet Adaptor OD (mm)

Code

Box Qty.

Each

160/178*

67012

20

11.20

*Reversible

160mm Outlet Connects to

150mm ID 150mm ID 150mm ID 150mm ID -

178mm OD 170mm OD 178mm OD 160mm OD 160mm OD 160mm OD 160mm OD 178mm OD

Twinwall Ultra-Rib Clayware Quantum PVC-u Land Drain Gully Connection Pipe Gully Connection Pipe

178mm Outlet Connects to

150mm ID -

160mm OD 160mm OD 160mm OD 160mm OD

Quantum PVC-u Land Drain Gully Connection Pipe

DN

Code

Each

110

67006

101.17

Single Socketed Bends

Plastic Yard Gully - HDPE Dia. (mm) 300

H (mm) 600

Double Socketed Bends


110 160 110 160 110 160 110* 160*

Gully Connection Pipe Dia. (mm)

Length (m)

Code

Each

160 178

25 25

67011 67008

270.54 338.44

Singlewall Supplied in coils

*Swept

21

Plastic Drainage


Fittings - BS EN1401-1 Continued

Fittings - BS EN1401-1 Rest Bends

Dia. (mm)

Angle

Code

Each

110

87º

72197

63.22

Paving Gully

Dia. (mm) 110 110*

Single Socketed

Junctions Double and Triple Socketed, Equal and Unequal

Rainwater Gully Dia. (mm) 110 110 160 160 110 110 160 160/110 160/110 160/110

Angle

Description

Code

Each

45º 87º 45º 87º 45º 87º 87º 45º 87º 87º

D/S Equal D/S Equal D/S Equal D/S Equal T/S Equal T/S Equal T/S Equal D/S Unequal D/S Unequal T/S Unequal

72109 72111 72117 72118 72113 72115 72119 72110 72112 72116

20.19 20.19 44.59 44.59 24.83 24.83 52.09 44.59 44.59 52.09

110 110*

Universal Gully

Level Invert Socket/Spigot Reducer

P Trap 90° Gully Trap 45º

Dia. (mm)

Code

Each

160x110

72088

25.28

Each 57.55 61.14

Code

Each

72209 72210

57.55 61.14

Dia. (mm)

Code

Each

110 110*

72211 72212

57.55 61.14

*All the above available with horizontal 110mm back inlet.

Traps

Fittings - BS EN1401-1

Dia. (mm)

Code 72199 72208

Dia. (mm) 110 110

Angle

Description

Code

Each

90° 45°

Low Back P Trap Gully Trap

72203 72174

27.02 17.19

x Plain Socket Plug

22

Square Hopper & Grid Dia. (mm)

Code

Each

110 160

72167 72160

7.70 14.31

Dia. (mm) 110

Description

Code

Each

Hopper and Grid Square Grid

72135 72136

14.56 5.03

Plastic Drainage


Universal Manhole

Fittings - BS EN1401-1 Continued Non Return Valve

Dia. (mm)

Code

Each

110

72134

274.95

Polypropylene Mini Access Chamber

Dia. (mm)

Depth

Code

Each

250

600

72169

POA

Complete Unit with cover & frame. 3 x DN110 Inlets 1 x DN110 Outlet

Screwed Access Cap

Dia. (mm)

Code

Each

110 160

72138 72137

17.52 22.42

Inspection Chambers Cover & Frame

DN

Code

Each

450

15003

POA

Light Duty Polyproylene, Dual Lock Cover & Frame. Test Load 35kN

Uni-Drain Connector Dia. (mm) 100

Code 15048

Each 19.35

Raising Piece

For round or square waste and rainwater pipes. Connects to any DN100 below ground system. Nominal OD of downpipe: between 34-82mm round, Max 65mm square

DN

Code

Each

470

15063

POA

DN470 Upstand x 215 deep with fitted seal

Rodding Eye S/S Rodding Eye 45°

Dia. (mm)

Code

Each

110

72207

POA

Base Unit

DN

Code

Each

470

72009

POA

DN470 Base Units x 240 deep. 5 x DN110 Inlets 1 x DN110 Outlet

Base Unit & 3 Raising Pieces & Cover = 945 Overall Depth

23

Land Drainage Kitemarked Land Drainage Kitemark Land Drainage Pipes (perforated)

Land Drainage Fittings

Dia. (mm)

Length (m)

Colour

Code

Each

60* 60* 80* 80* 80* 100* 100* 100* 160*

50 150 25 50 100 25 50 100 50

Black Black Black Black Black Black Black Black Black

68202 68204 68301 68302 68303 68401 68402 68403 68502

83.38 227.39 64.86 129.70 235.81 106.59 213.18 387.59 454.97

Junctions

Description

Code

Each

60/80/100 Multi Junction 60/160 Multi Junction

68064 68061

11.26 18.68

Dia. (mm)

Code

Each

60 80 100 160

68086 68087 68062 68063

3.30 3.47 3.65 5.76

Dia. (mm)

Code

Each

60 80 100 160

68090 68088 68091 68109

2.59 3.30 3.78 8.01

Connectors

Manufactured in High Density Polyethylene *Marked Naylor BS 4962

Kitemark Singlewall Carrier Pipes Dia. (mm) (unperforated

Length (m)

Colour

Code

Each

150 100 100 50

Black Black Black Black

68214 68313 68413 68512

238.77 247.61 406.97 477.72

60* 80* 100* 160*

End Caps

Manufactured in High Density Polyethylene. *Marked Naylor BS 4962 Subject to minimum order quantity and lead time.

Environmental Land Drainage Water Attenuation/ Infiltration Crates

Stormwater Management Solutions

GS Paving

MetroCell Crates

W (mm)

L (mm)

D (mm)

Code

1000

1000

333

74028

Price per Crate POA

Connecting Clips provided by m³ 3 x single clip, 1 x double clip *Bearing Capacity - 600 N/m² vertically - 150 N/m² horizontally Please contact Naylor Sales Department for product suitability. Each project priced on individual merits.

24

Made from 100% recycled material.

For a copy of our Environmental Products Brochure e-mail your details to: [email protected]

L D No. Of Grass and Gravel Duty/Colour W (mm) (mm) (mm) Plates/m² Code reinforced Heavy Duty 500 500 70 0.25m² plastic paving Black Medium Duty 500 500 40 0.25m² 74040 Black Usage Data Number of Plates per Pallet 100 Number of m² per pallet 25 Refer to technical brochure for installation details.

Price POA POA

Land Drainage Agri-Drain

Manufactured in accordance with BS4962 Made from 100% recycled material.

Agri-Drain Land Drainage (perforated) Agri-Drain Land Drainage

Agri-Drain Land Drainage (unperforated)

Dia. (mm)

Length (m)

Colour

Code

Each

60 60 80 80 80 100 100 100 160 160*

50 150 25 50 100 25 50 100 50 35

Black Black Black Black Black Black Black Black Black Black

68032 68033 68034 68035 68036 68037 68038 68039 68007 68094

68.73 187.44 50.55 101.08 183.78 88.28 176.54 320.98 395.49 304.30

(perforated) - Black

Manufactured in High Density Polyethylene.

Manufactured in accordance with BS 4962. 100% recycled * Subject to minimum order quantity and lead time.

Agri-Drain Singlewall Carrier Pipes (unperforated) - Black

Manufactured in High Density Polyethylene.

Aqua-Lite including snap in black plastic grating and joiner

Length (m)

Colour

Code

Each

60 60 80 80 100 100 100 160 160*

50 150 50 100 25 50 100 50 35

Black Black Black Black Black Black Black Black Black

68042 68043 68053 68049 68050 68044 68045 68009 68046

72.16 196.80 106.14 192.97 92.69 185.38 337.03 415.27 319.52

Manufactured in accordance with BS 4962. 100% recycled * Subject to minimum order quantity and lead time.

A lightweight plastic system for use in driveways, patios, pathways around swimming pools, sports courts, gardens, along retaining walls and any area where surface water collection is necessary E-mail: [email protected] for your Aqua-Lite point of sale.

Channels

Dia. (mm)

Aqua-Lite Linear Drainage Aqua-Lite Fittings

Length (m)

Pallet Qty.

Code

Each

40 20/40

70007 70008 70017 70032

31.59 93.05 3.73 9.05

1.0* 3.0* Additional Joiner Additional Plastic Grate (1m)

*Made from 100% recycled material

Fittings End Cap/Outlet

Item

Finish off end of drain End Cap / Rubber Connector or connect to 100mm End Cap bore outlet pipe DN100 Running Outlet

T-Piece 90° Angle

Code

Each

70016 70011 70019 70020 70021

9.42 4.51 53.69 53.69 53.69

Running Outlet End Cap

(110mm PVC Outlet)

T-Piece

90° Angle

25

Metro Power Class 2 Twinwall Cable Duct Fully compliant with ID/OD (mm) Length (m) ENATS 12/24 Issue 2007/8 for C2 100/120 6 Application

Supplied with one coupling per length.

100/120 100/120 100/120 125/145 125/145 125/145 125/145 150/178 150/178 150/178 150/178

3 2 1 6 3 2 1 6 3 2 1

MetroDuct Sealed System

Code

Pack Qty.

Each

29516 29513 29512 29511 29616 29613 29612 29611 29716 29713 29712 25711

85 85 85 85 72 72 72 72 33 33 33 33

POA POA POA POA POA POA POA POA POA POA POA POA

Sealed System Couplings

Sealing Rings

Code

Pack Qty.

Each

29046 29364 29394

100 85 33

POA POA POA

26

Each

29226 29362 29395

POA POA POA

ID/OD (mm)

Code

Each

94/110 100/120 150/178

29107 29115 29117

POA POA POA

NJUG Colour Coding All Metro Twinwall Pipes Manufactured to BS EN 61386 BBA Certified

Motorway Communications/ ID/OD (mm) Length (m) Power 94/110 6 Black Plain Ended 100/120 6 150/178 6

Code

94/110 100/120 150/178

Fully compliant with Highways Specification Series 1500 For Lubricants - see page 30

MetroDuct Sealed System Motorway ID/OD (mm) Length (m) Communications Purple Plain Ended 94/110 6 100/120 6 150/178 6

ID/OD (mm)

Code

Pack Qty.

Each

29007 29388 29370

100 85 33

POA POA POA

Colour Black/Red Orange Purple Yellow Blue Green Grey

Application Electricity/Power Street Lighting/Traffic Signal Motorway Communication/Street Lighting (Scotland) Gas Water CCTV Telecommunications


Duct pipes sold only in full packs into stock. Made from 100% recycled material.

Metro Twinwall - Electric - Black Heavy Duty High Density Polyethylene Twinwall Ducting printed - Electric Cable Duct


Twinwall Split Duct C/W Dowels or ties as appropriate.


ID/OD (mm) 94/110 100/120 125/145 137/160 150/178 100/120 125/145 150/178 100/120 125/145 150/178

Length (m)

ID/OD (mm) 94/110 100/120 125/145 150/178 94/110 100/120 125/145 150/178

Length (m)

6 6 6 6 6 3 3 3 2 2 2

1 1 1 1 3 3 3 3

N-Twin HDPE General Purpose Duct

Pack Qty. 100 85 72 33 33 85 72 33 85 72 33

Code

Each

29120 29278 29111 29119 29112 29208 29273 29275 29347 29199 29209

33.11 38.23 57.18 63.67 70.08 23.03 33.63 38.54 16.29 25.36 28.26

Pack Qty. 100 85 72 33 100 85 72 33

Code

Each

29285 29080 29210 29121 29070 29081 29242 29223

31.10 32.15 47.01 60.84 51.46 52.27 60.47 89.75

Code

Each

29450 29451 29452 29453 29454

33.11 38.23 57.18 63.67 70.08

Lightweight applications only.

BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA

ID/OD Length (m) (mm) 94/110* 6 100/120* 6 125/145* 6 137/160* 6 150/178* 6

Pack Qty. 100 85 72 33 33

*Subject to minimum order quantity and lead time. Supplied with one coupling per length.

L (m) 6

Pack Qty. 33

Colour

Code

Each

Black

37008

58.73

Supplied with one coupling per length. Requires adequate protection during installation. Check suitability before installation. Non BBA Product

N-Twin Coupling OD (mm)

Code

Each

178/150

37010

8.42

MetroFlex Twinwall Coiled Ducting HDPE/LDPE Twinwall Ducting Printed - Electric Cable Duct

Metro Twinwall - Black Unmarked High Density Polyethylene Twinwall Ducting

Dia. (mm) 178/150

ID/OD (mm) 32/40 40/50 50/63 75/90 94/110 137/160 137/160

Length (m)

Colour

Code

Each

50 50 50 50 50 25 50

Black Black Black Black Black Black Black

29020 29265 29113 29266 29267 29268 29092

152.12 154.61 169.02 279.22 350.27 424.34 808.23

Coils supplied with pre-installed draw string and coupling.

BBA BBA BBA BBA BBA

Metro Twinwall - Motorway Communication - Purple Printed - Motorway Communications

ID/OD (mm) 94/110 100/120 137/160 150/178

Length (m) 6 6 6 6

Pack Qty. 100 85 33 33

Code

Each

29043 29200 29249 29059

45.87 47.13 74.81 87.30

BBA BBA BBA BBA


27



MetroFlex Twinwall Coiled Ducting Motorway Communications - Purple

Metro Twinwall Utility Ducting

ID/OD (mm)

Length (m)

Code

Each

50/63 94/110 137/160*

50 50 50

29279 29280 29019

185.36 388.57 870.34

Yellow

Coils supplied with pre-installed draw string and coupling. *Subject to minimum order quantity and lead time. Printed - Motorway Communications

Blue

MetroFlex Twinwall - Street Lighting/Traffic Signal or Plain ID/OD Length Marked (m) Printed - Street Lighting (mm) or Traffic Signal. 6 50/63 Street Lighting 6 50/63* Traffic Signal 6 94/110 Street Lighting 6 94/110 Traffic Signal 6 100/120* Street Lighting 6 100/120* Traffic Signal 6 137/160* Street Lighting 6 137/160* Traffic Signal Supplied with one 6 150/178 Street Lighting coupling per length. 6 150/178 Traffic Signal 6 94/110 Plain 6 Plain *Subject to minimum 100/120* 6 137/160* Plain order quantity and lead time. 6 150/178* Plain Orange

Pack Qty. 158 158 100 100 85 85 33 33 33 33 100 85 33 33

Code

Each

29087 29086 29085 29084 29083 29082 29198 29189 29061 29356 29042 29052 29197 29357

24.75 24.75 45.87 45.87 POA POA POA POA 87.30 87.30 45.87 POA POA POA

BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA BBA

ID/OD Length (m) (mm) 6 94/110 6 100/120* 6 137/160 6 150/178 6 225/266+ 6 300/353+

Pack Qty. 100 85 33 33 14 9

Code

Each

29045 29349 29244 29358 29411 29412

47.99 POA 79.13 91.33 169.12 262.82


94/110 100/120* 137/160 150/178 225/266+ 300/353+

6 6 6 6 6 6

100 85 33 33 14 9

29110 29350 29241 29355 29413 29414

47.99 POA 79.13 91.33 169.12 262.82


94/110 100/120* 137/160* 150/178

6 6 6 6

100 85 33 33

29281 29351 29250 29359

47.99 POA POA 91.33

BBA BBA BBA BBA

94/110* 150/178*

6 6

100 33

29238 29396

POA BBA POA BBA

Red - unprinted*

94/110*

6

100

29170

POA BBA

Brown - unprinted*

94/110*

6

100

29068

POA BBA

Brown - Urban

94/110*

6

100

29069

POA BBA

Green - CCTV

Printed

Grey - Telecommunications

MetroFlex Twinwall Coiled Ducting Orange Printed - Street Lighting, Traffic Signal or plain.

28

Coils supplied with pre-installed draw string and coupling.

ID/OD (mm) 50/63 50/63 94/110 94/110 137/160* 137/160* 50/63 94/110 137/160*

Length (m) 50 50 50 50 50 50 50 50 50

Marked

Code

Each

Street Lighting Traffic Signal Street Lighting Traffic Signal Street Lighting Traffic Signal Plain Plain Plain

29091 29090 29089 29088 29135 29348 29037 29047 29124

185.36 185.36 388.57 388.57 POA POA 185.36 388.57 POA

*Subject to minimum order quantity and lead time.

Traffic Control

Supplied with one coupling per length. *Subject to minimum order quantity and lead time. + Please Note: Pipe supplied plain ended - order couplings separately.



MetroFlex Twinwall Utility Ducting Yellow

Couplings Continued

ID/OD (mm)

Length (m)

Code

Each

50/63 94/110

50 50

29040 29050

185.36 388.57

50 50 50

29026 29039 29049

173.78 185.36 388.57

50 50

29094 29171

185.36 388.57

Couplings Black as standard

OD (mm)

Code

Each

145 160 178 225 300

29100 29099 29098 29415 29416

9.28 8.77 9.78 23.54 29.43

Code

Each

29107 29115 29106 29117

2.33 2.55 3.84 4.49

Unprinted

Blue

40/50 50/63 94/110

Made from 100% recycled material.

Unprinted

50/63 94/110

Green - CCTV

Sealing Rings Sealing Rings

Diameter (mm)

Unprinted

110 120 160 178

Coils supplied with pre-installed draw string and coupling. Other colours available subject to a minimum order quantity and lead time.

MetroCoil Singlewall Ducting - Yellow Perforated Gas Duct Pipe Kitemarked to BS4962

Complies with TRANSCO specification. Coils supplied with coupling.

Diameter (mm) 60 60 80 80 80 100 100 100 160

For sealed system 2 sealing rings required per 6m length.

Length (m)

Code

Each

50 150 25 50 100 25 50 100 50

68075 68074 68073 68072 68071 68070 68069 68068 68066

104.79 307.88 83.77 164.34 319.17 131.14 262.25 524.57 615.76

Couplings Couplings Black as standard

Twinwall Bends Twinwall Bends Supplied plain ended Black as standard

ID/OD (mm) 94/110 100/120 125/145 137/160 150/178

22½° Code 29141 29174 29165 29180 29183

11¼° Code 29144 29215 29243 29022 29262

45° Code 29138 29164 29166 29181 29163

90° Code 29149 29159 29156 29182 29162

Each 23.06 26.93 52.81 56.13 57.64

Order couplings separately.

Duct Spacer OD (mm)

Code

Each

40 50 63 90 110 120

29161 29167 29104 29103 29225 29101

2.74 3.08 3.83 5.71 5.14 5.76

Duct Spacer

Description

Size (mm)

Code

Each

4 Way 4 Way

110 120

29230 29375

7.69 9.67

29



End Caps End Caps

Metro Duct Plug Diameter (mm) 63 90* 110 120 145 160 178

*Subject to minimum order quantity and lead time.

Code

Each

29131 29130 29129 29128 29127 29126 29168

2.96 3.48 3.84 4.63 7.93 8.43 9.60

MetroCoil Singlewall Ducting Street Lighting Scotland - Purple

OD (mm) 35 63 105 163

Each

29342 29343

POA POA

Fully compliant with Highways Specification Series 1500 Other sizes available to order.

Sitework Equipment Universal Lubricant

Code

Each

Size (Kg)

Code

Each

25 100 40 30

Purple Purple Purple Purple

M68027 M68006 M68001 M68110

103.56 379.29 223.91 327.68

1 2.5

50001 50002

9.55 23.87

Description

Code

Each

220 Metre Coil 500 Metre Drum

29264 29191

32.97 67.76

Junction Boxes OD (mm) 105

30

Code

94 100

Colour

Supplied in plastic tubs.

Draw Cord

MetroCoil Fittings

Reducers OD (mm) 105x63

ID (mm)

Length (m)

Polyethylene corrugated ducting

Connectors OD (mm) 63 105

Duct Plug

Colour

Code

Each

Black

M68132

28.04

Colour

Code

Each

Black Black

M29343 M29345

4.16 5.52

Colour

Code

Each

Black

68008

22.22

Nominal 5Kn Breaking Strength. 6mm cord.

Marker Tape Service

Colour

Code

Each

Electric Cable Water Main Gas Main Telephone Cable Foul Sewer Street Lighting

Yellow Blue Yellow Green Red Yellow

34036 34037 34038 34039 34040 34041

130.79 140.26 140.26 140.26 154.41 140.26

365m Rolls.

Metro Access Systems

Composite Covers for chambers and pole boxes have Weight Limit of 12.5T. All Access and Pole Boxes are made from 100% recycled material.

Metro Access Chambers W (mm) 300 300 450 450 600 450

L (mm) 300 450 450 600 600 900

D (mm) 335 335 335 335 335 250

Covers & Frames - Pole Boxes Pack Qty 42 35 28 24 13 18

Code

Each

69121 69124 69012 69123 69122 69036

50.39 59.57 67.08 88.59 113.95 177.38

Composite - Anti Slip

Metro Covers & Frames Dimension (mm)

Code

Each

300x300 300x450 450x450 450x600 600x600

69128 69129 69127 69126 69125

222.68 253.55 318.15 380.63 423.39

Standard loading to: BS EN124 Class B 125. Cover and Locking Galvanised Frame. Badged S/L T/S. Deep seated frame.

Galvanised Steel

Fabricated Steel. Single Seal.

Dimension (mm)

Code

Each

300x300 300x450 450x450 450x600 450x900 600x600

69101 69098 69099 69100 69069 69102

161.18 172.18 206.69 259.42 537.83 350.88

Code

Each

300x300 450x450

69158 69159

196.28 290.74

Standard loading to: BS EN124 Class B 125. Cover and Locking Galvanised Flat Frame. Badged S/L T/S.

Galvanised Steel

Composite - Anti Slip

Dimensions (mm)

Dimensions (mm)

Code

Each

300x300 450x450

69156 69157

88.28 113.01

Fabricated Steel Single Seal. Class AAA. Chequered Plate Solid Top Cover and Locking Flat Frame. 10 Tonne Max.

Commercial Duct Chamber Sizes

Each

From 600mm up to 2.8m Fabricated to suit customer requirements

POA

Chequered Plate Solid Top Cover and Locking Frame. CLASS AAA. 10 Tonne Max. Deep seated frame.

Metro Pole Boxes W (mm) 275 450

L (mm) 295 450

H (mm) 500 500

Pack Qty 24 16

Code

Each

69024 69025

112.20 151.37

31


PVC-u Duct pipes sold only in full packs into stock. All GP Duct is manufactured from 100% recycled material.

General Purpose Duct PVC-u Dia (in) 2 3 4 6

Dia (mm) 54 88.9 114 168

Wall (mm) 1.5 - 1.7 1.8 - 2.2 1.9 - 2.4 2.2 - 2.9

MetroSmooth Couplings

Pack Qty. 252 137 86 39

Code

Each

ID/OD (mm)

Code

Each

30052 30053 30054 30055

13.29 21.74 22.37 50.60

53/63 97/107

38007 38042

POA 5.00

6 Metre lengths. Colour supplied depends on availability. Lightweight applications only.

MetroSmooth PE Electric Cable Duct

Check suitability before installation. NB. Requires adequate protection during installation.

General Purpose Duct Bends Dia (in) 2 3 4 6

Dia (mm) 54 88.9 114 168

11¼° Code 36054 36053 36052 36051

22½° Code 36058 36057 36056 36055

45° Code 36071 36078 36079 36080

90° Code 36073 36074 36075 36076

Each 6.49 8.44 9.53 24.13

HDPE Smooth internal and external. Colour Black.

ID/OD (mm) 32/37 32/37 32/37 38/44 38/44 38/44 50/60 50/60

Coils supplied plain ended.

General Purpose Duct Connectors Dia. (in)

Dia. (mm)

Code

Each

2 3 4 6

54 88.9 114 168

36050 36049 36048 36047

2.99 4.49 4.93 6.06

MetroSmooth PE Duct - Street Lighting/Traffic Signal ID/OD Description (mm) 53/63* Street Lighting 97/107 Street Lighting 53/63* Traffic Signal 97/107 Traffic Signal

WT (mm) 5 5 5 5

Pack Qty. 288 76 288 76

Code

Each

38028 38091 38059 38030

POA 56.67 POA 56.67

HDPE Smooth internal and external. 6 Metre lengths. Colour Orange. *Subject to minimum order quantity and lead time. Supplied with one coupling per length.

32

Bends available for the above, subject to a minimum order quantity and lead time.

Description Elec Cable Duct Elec Cable Duct Elec Cable Duct Elec Cable Duct Elec Cable Duct Elec Cable Duct Elec Cable Duct Elec Cable Duct

WT (mm) 2.5 2.5 2.5 3 3 3 5 5

Length (m) 25 50 100 25 50 100 25 50

Code

Each

38020 38023 38024 38021 38025 38026 38033 38034

48.16 96.30 183.43 59.78 119.54 227.70 116.23 221.38

Naylor Specialist Plastics Pump Tube

Smooth Wall Ducting HDPE Smooth Wall Ducting

OD/ID (mm) 110/103 107/97 90/80 63/53

Wall (mm) 3.5 5.0 5.0 5.0

Colour Orange* Orange* Orange* Orange*

Length (m) 6** 6** 6** 6**

Code

Each

-

POA POA POA POA

*Other colours can be made. **Standard Length - Other lengths can be made up to 12m max. 110mm, 107mm and 90mm duct can be printed - Traffic Signal, Street Lighting, Amenity Lighting if required

LDPE Smooth Wall

OD (mm) 2”/60 3”/84 4”/110 6”/164 8”/213

Wall (mm) 6.3 6.5 6.5 8.5 9.5

Colour Black Black Black Black Black

Length (m) 6 6 6 6 6

Code

Each

-

POA POA POA POA POA

Other Specialist Plastic Products For further details on our full range of our plastic products which include:

Flexible Cable Ducting Corrugated Singlewall Ducting

OD (mm) 32 25 20 16

Wall (mm) 1 1 1 1

Colour Orange* Orange* Orange* Orange*

Length (m) 25/50 25/50 25/50 25/50

Code

Each

-

POA POA POA POA

Wall (mm) 2.5 3 5

Colour Black Black Black

• Smoke aspiration pipes

• Bespoke extrusions 2mm to 200mm HDPE, PP, LDPE, ABS, PVC etc Contact Naylor Specialist Plastics Tel 0121 522 0290

Smooth Wall Coiled Ducting OD/ID (mm) 37/32 44/38 60/50

• Waste pipe • Packaging tubes and cores

• Show jump poles

*Other colours can be made. Can be made in HDPE or PP.

HDPE or MDPE Ducting

• Irrigation tube

Length (m) 50/100 50/100 50/100

Code

Each

-

POA POA POA

Can be printed Electrical Cable Ducting. Also available: 20/30/40mm Black HDPE Irrigation Pipe

33

Denlok

Denlok jacking pipes are characterised by a high axial strength making them an ideal choice for installation by trenchless technology. 15% of our Clayware products are made from recycled material.

Denlok Vitrified Clay Jacking Pipes

Denlok Vitrified Clay Jacking Pipes Denlok NS Jacking Pipe

Standard Length

DN

1.0/2.0 1.0/2.0 1.0/2.0 1.0/2.0 1.0/2.0

400 450 500 600 700

Nett Price per m POA POA POA POA POA

Complete with stainless steel sleeve, EPDM seals and particle board thrust ring.

Denlok NC Jacking Pipe

Standard Length

DN

Code

DN150 complete with 40043 1.0 150 EPDM seals en40044 1.0 200 capsulated in a polypropylene 40045 1.0 225 coupling with 40046 1.0 250 moulded thrust ring. 40047 1.0 300 DN200-300 complete with EPDM seal and thrust ring encapsulated in 304 stainless steel sleeve.

Nett Price per m POA POA POA POA POA

Filter Tiles

34

For use in pipe replacement and specialist auger boring applications.

Price include all necessary joint components

Standard Lengths

DN

Available on request

Available on request

Nett Price per m POA

Other lengths made to order.

Note: Denlok jacking pipes are available in a variety of lengths and outside diameters to suit specialist equipment: technical advice is ready available. Please contact the Naylor Emerging Businesses Office for assistance or a specific quotation, appropriate to the requirements of each individual contract.

DenCon DN

Code

Each

150

40075

POA

Two piece flexible saddle suitable for connecting DN150 lateral pipes to concrete or clay. NB: All prices are NETT. Standard terms for Naylor Drainage materials DO NOT APPLY TO DENLOK

For a copy of our Filter Tiles Brochure e-mail your details to: [email protected] 15% of our Clayware products are made from recycled material.

Vitrified Clay Filter & Sludge Bed Tiles Arched Tiles

Revit NS

Vitrified Clay Filter & Sludge Bed Tiles

Description

Price

Arched Tiles

POA

Flat Topped Tiles

Description Flat Topped Tiles

Fig. 601 Standard tiles High rate tiles Special tiles and fittings

Fig. 700 Standard tiles Special tiles and fittings Decanting columns

Naylor offers a layout & design service for filter and sludge beds.

Naylor offers a layout & design service for filter and sludge beds.

Price POA

A range of ceramic pipes, fittings and couplings which are fully chemically resistant and/or resistant to thermal shock

For further details including prices and availability of any of the following specialist items please contact the Naylor Sales Office. 15% of our Clayware products are made from recycled material.

Hathernware

Naylor HT Sleeve Couplings

HT Sleeve - Thermal Shock & Chemically Resistant • Suitable for handling sudden changes in effluent temperatures frequently experienced in boiler blowdown drains, bottle washing or sterilisation areas in the dairy, food or drink industries.

Where Chemical resistance is less of a priority but effluents are subject to thermal cycling, it may be possible to specify Naylor HT Sleeve couplings to connect HT pipes and fittings. Please ensure suitability for your application by contacting Naylor Technical Dept, before placing order.

• In addition when used in conjunction with Naylor Chemical Couplings the HT pipes and fittings may be used to handle aggressive chemicals.

For a copy of the Report by Ceram Technology commissioned by Naylor e-mail your details to: [email protected]

• Plain ended pipes and fittings.

Clayware - Specially formulated clay body capable of resisting temperature changes in excess of 120°C. Pipes & Fittings - Available from DN100 up to DN450. Couplings - HT Sleeve couplings with EPDM seals or Naylor Chemically Resistant Couplings depending upon effluent.

Naylor Chemically Resistant Couplings

Pipes HT

Standard Lengths (m) 1.6 1.75 1.25 1.25 1.25 1.25 1.25

DN

Thermal Shock and Chemically Resistant Pipes

100 150 225 300 375 400 450

The range of Naylor Hathernware chemically resistant couplings offers the chemical and process industries the advantage of a modern, mechanical, flexible jointing system for any plain end pipe system. Elastomeric Sleeve - Manufactured in a high EPDM or Nitrile elastomers conforming to EN681-1.

Code 83090 83108 83037 83044

Nett Price per m POA POA POA POA POA POA POA

Clamping Bands - Manufactured in a high corrosion resistant austenitic stainless steel to EN10088. Where external contamination demands a higher quality stainless, this can be supplied to order. Fluoropolymer Liner - A one-piece seamless FEP element located within the elastomeric sleeve. Expanded PTFE secondary seals ensure a leak tight joint between the FEP and the pipe. For the best results and to ensure a close fit between the liner and pipe the FEP liner is heat shrunk on site. The liner and seal are chemically inert and resistant to virtually all chemicals. Adaptor Couplings - Available where pipes of different outside diameters require connecting.

Bends DN 100 150 225 300 375 400 450

90° 83382 83385 83041 83045

HT Codes 45° 22½° 83383 83377 83387 83402 83040 83039 83033 83034

11¼° 83376 83401 83038 83035

HT Nett Each POA POA POA POA POA POA POA

35

Hathernware

A range of ceramic pipes, fittings and couplings which are fully chemically resistant and/or resistant to thermal shock

Junctions Oblique 45°

Curved Square 90°

For further details including prices and availability of any of the following specialist items please contact the Naylor Sales Office. 15% of our Clayware products are made from recycled material.

Chemical Couplings DN

100x100 150x100 150x150 225x100 225x150 225x225 300x150 200x225 300x300 375x100 375x150 375x225 375x300 375x375 400x100 400x150 400x225 400x300 400x375 400x400 450x100 450x150 450x225 450x300 450x375 450x400 450x450

Oblique HT 83378 83379 83384 83042 83031 83043 83025 83047 83048

Curved Square FCR Nett Each HT POA 83074 POA 83080 POA 83081 POA POA 83082 POA 83083 POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA

HT Nett Each POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA POA

Larger sizes available on request.

DN

Coupling Ref.

Code

100 150 225 300 375 400 450

NCC142 NCC200 NCC290 NCC385

21047 21045 21046 21051

Nett Price per m POA POA POA POA POA POA POA

A range of Taper, Gullies and Hoppers and Channel items is also available. For prices please contact the Hathernware Sales Office.

HT Sleeve Couplings HT Sleeve Couplings

DN

Coupling Ref.

Code

100 150 225 300

HT100C HT150C HT225C HT300C

83103 83104 83105 83106

Nett Price per m POA POA POA POA

HT Sleeve Couplings are supplied with EPDM Sealing rings as standard and are yellow in colour. Other materials available, POA. Please check suitability for your application with Naylor technical dept. prior to order.

NB: Nett prices will be quoted for Hathernware goods. Standard terms for Naylor Drainage materials DO NOT APPLY TO THE HATHERNWARE PRODUCT RANGE PLEASE NOTE: a) Small quantities of standard length pipes, bends and junctions are generally available at short notice. b) Project quantities will normally be made to order and delivery schedules must be agreed before placement of orders. c) Larger sizes and specialist items may be made to order.

36

Handling, Unloading, Packaging Unloading Access to site must be over a hard road capable of supporting a fully laden vehicle. The delivery vehicle must be parked on firm, flat ground. Naylor clay pipes are delivered to site in packs weighing between 1 and 1.9 tonnes. Clay fittings are usually supplied in crates. Any loose fittings should be removed by hand from the delivery vehicle before other goods are unloaded.

Packing Naylor clay drainage pipes are supplied in standard pack sizes. Clayware fittings are usually supplied in wooden packing crates to help protect the product from damage and facilitate secure and safe delivery to destination.

Merchant Stockists

It is the customer’s responsibility to arrange for Naylor vehicles to be unloaded promptly. Naylor reserve the right to charge excessive waiting time.

Use of Customer Equipment to Unload This is the responsibility of the Customer.

The wooden packing crates are expensive for us to provide free of charge. For economic and environmental reasons we would ask you to help us conserve resources by returning any empty crates to us. Please let us know whether there are any empty crates to collect at the time you place your orders.

Pipe packs and crates can be offloaded by fork-lift, or by suitable crane or other machine using a sling.

Merchant Stockists

Hand Offloading of Pipes by site personnel Check that the pipe pack is stable and that the pipes and packing woods are undamaged before cutting the straps and manually unloading.

Help us to help you 1.

Stacking Pipes Delivered in Packs Set the packs down on a firm and level surface.

Storage of Loose Pipes Rest the bottom row of pipes on battens to keep them clear of the ground and stake the end pipes in order to prevent movement of the stack.

Sleeve Couplings and Lubricant Store indoors in a clean area, away from sunlight. Extremes of temperature must be avoided. Winter conditions, in particular, can affect the ability to make a joint if items have been left outdoors. For a copy of our Sitework Instruction Booklet e-mail your details to: [email protected]

2.

Use the telephone and fax numbers listed on the back cover for orders and enquiries. Identify your individual Naylor contacts both internally based and external. Place orders in carriage paid load sizes by fax and include the following information • Clear product descriptions • Clearly indicate whether pipe quantity ordered is per metre or pipe length • Indicate purchase order number • Give a full delivery address along with postcode • Indicate any special delivery instructions ie. Site access, restrictions etc. • Date delivery required • Indicate prices for each product and show a nett order value • Give your name and contact details

Returns Policy Naylor operates a nil returns policy and will not be responsible to accept the return of Goods duly supplied in pursuance of the customer’s order.

37

General Conditions of Sale In these conditions unless the context requires otherwise:

2.

"Company" means Naylor Drainage Limited or Naylor Concrete Products Limited as appropriate

Unless the Company has agreed otherwise, all invoices must be paid by the end of the month following the month in which delivery of the Goods was made. In the event of late payment, any cash discount previously agreed shall be withdrawn.

"Customer" means the company, firm, body or person purchasing the Goods. "Goods" means the subject matter of the contract and one or a number of items whether or not identical or similar. 1.

CONTRACT. QUOTATIONS. TENDERS AND PRICE LISTS

All quotations, tenders and price lists are subject to withdrawal at any time by the Company without prior notice. The Company reserves the right to amend these General Conditions of Sale without prior notice. In any future dealings with the Company, the Customer will be bound by any amended terms upon receipt of a copy of the same. Any acceptance of any quotation, tender or price list will not effect a binding contract unless and until confirmed by the Company in writing or by delivery of the goods whichever is the earlier and the following conditions shall be deemed to be incorporated in the contract. The contract will be subject to these conditions. Any terms and conditions appearing in or referred to in any order of the Customer or otherwise stipulated by the Customer shall not be binding on the Company unless expressly agreed by the Company in writing.

Notwithstanding these standard terms, the Company reserves the right in any case (without any reason being given) to require a Customer to make payment in full for any order prior to delivery where these or other terms have been agreed between the Company and the Customer. Except in the case of the manifest error, all invoices raised by the Company shall be deemed to be correct unless the Customer notifies the Company in writing of any objection within 7 days of receipt by the Customer of the Company's invoice. If any payment is not made strictly in accordance with any credit account or other terms agreed by the Company any other invoices which may be unpaid (irrespective as to whether or not they have fallen due in accordance with the said terms) shall become immediately payable in full. Should any payment not be made strictly in accordance with any credit account or other terms agreed by the Company, the Company reserves the right to cancel any other order or contract (or any part or parts thereof). Any claims of the Company against the Customer in respect of any cancelled orders or contracts or otherwise shall not be prejudiced in any way.

Any variation by us or the Customer of the contract must be confirmed in writing by the Company prior to the despatch of the Goods from the Company's works.

The Company may refuse to accept any order from or deliver any Goods to the Customer where the invoice for those Goods would result in the Customer owing the Company a sum greater than any limit of credit agreed by the Company.

Notwithstanding any offer, quotation, tender or price list, orders are accepted only subject to the condition that the Goods will be invoiced at the prices ruling at the date of their despatch from the Company's works.

The level of credit provided by the Company to any Customer is entirely within the discretion of the Company which may without prior notice to the Customer reduce or withdraw the level of credit at any time.

The price stated in the contract is based on the cost to the Company at the date of acceptance of the order or quotation and may be increased at the request of the Company if there has been an increase in the cost to the Company at the date of despatch. Such increase will be limited to the increase in cost to the Company and will be payable by the Customer.

The Company's invoices are calculated by computer and net invoice prices are calculated to two decimal places.

Unless otherwise stated:The contract price and all prices shown in quotations, tenders and price lists are "ex works" prices and exclude value added tax, and any other tax or duty which will be paid by the Customer to the Company at the rate ruling on the date that Goods are despatched from the Company's works. The contract price and the price stated in any quotation, price list or tender is exclusive of any tax or cost relating to the export, import or delivery of the Goods beyond the point of delivery specified in the contract. Any such tax or cost relating to the export, import or delivery of the Goods beyond the point of delivery will be payable by the Customer to the Company. Unless otherwise stated, sizes and weights on contracts, price lists quotations, tenders or literature are approximate only, as variations in manufacture and materials cannot be avoided. The Customer agrees that the Company shall be entitled to assume that all drawings, descriptions, specifications and other information supplied by the Customer to the Company whether verbal or written are in all respects complete, accurate and entirely suitable for the Customer's requirements.

38

TERMS OF PAYMENT

Interest shall be payable on any account which is not paid in accordance with the terms agreed between the Company and the Customer. Interest shall be calculated from the date of the invoice and be at 4% above the base rate for the time being of the Bank of Scotland Bank PLC. 3.

RETENTION OF TITLE

3.1 Risk in the Goods passes to the Customer as from delivery. 3.2 Title in the Goods shall remain with the Company and shall not pass to the Customer until: 3.2.1 the amount due under the invoice for them including any interest has been paid in full 3.2.2 no other sums whatever shall be due from the Customer to the Company. 3.3 Until title in the Goods passes to the Customer, the Customer shall hold the Goods on a fiduciary basis as bailee for the Company. The Customer shall store the Goods (at no cost to the Company) separately from all other Goods and mark the Goods, so that they are clearly identified as the property of the Company. The Customer agrees not to incorporate the Goods into any structure or building until they are paid for.

The Customer shall indemnify the Company in respect of all costs which the Company incurs through no fault of the Company as a result of any change in the requirements after the contract.

3.4 The Customer shall insure the Goods for the full price against all risks to the reasonable satisfaction of the Company and the Customer will produce a copy of the policy of insurance whenever requested by the Company until title in the Goods passes to the Customer.

Unless otherwise expressly agreed, the Company shall have no responsibility for the performance, suitability or durability of any Goods or any materials or workmanship comprised therein to the extent the same is manufactured in accordance with the Customer's designs, drawings, standards or specifications.

3.5.1 repossess and dismantle and use or sell all or any of the Goods and by doing so terminate the Customer's right to use, sell or otherwise deal in them; and

3.5

The Company may at any time before title passes:

General Conditions of Sale 3.5.2 for that purpose or determining what if any Goods are held by the Customer and inspecting them, enter any premises owned occupied or controlled by the Customer. 3.6 Notwithstanding that the Goods remain the property of the Company, the Customer may sell the Goods in the ordinary course of business at full market value for the account of the Company: 3.6.1 any such sale will be a sale of the Company's property by the Customer on the Customers own behalf and the Customer will deal as principal when making such sales; and 3.6.2 until property in the Goods passes from the Company to the Customer the proceeds of sale relating to the Goods shall be held in trust for the Company and shall not be mixed with other money or paid into any overdrawn bank account and shall be at all material times identified as the money of the Company. The Company shall remain legally and beneficially entitled to the proceeds of sale. 3.7 To enable the company to exercise its rights to Goods which have not been paid for the Customer hereby grants a right of entry to and rights of way and/or access to all parts of any property owned or occupied by the Customer upon which the Goods are situated. 3.8 The Company may maintain an action for the price of the Goods, plus VAT notwithstanding that title in them has not passed to the Customer. 3.9 If any provision of this Agreement is found by any court or administrative body of competent jurisdiction to be invalid or unenforceable then such invalidity or unenforceability shall not affect the other provisions of this Agreement which shall remain in full force and effect. 4.

AVAILABILITY AND TIME

Offers to supply Goods from stock on or within a given time or period are made subject to the availability of the Goods at a given time. Unless expressly agreed by the Company, time shall not be of the essence in any contract. The Company will not be liable in any circumstances (whether the fault be that of the Company or not) for the consequences of any delay in delivery or performance or failure to deliver or perform for whatever reason. Unless non-standard lengths of pipe are specifically required, standard lengths will normally be supplied. The Company reserves the right to supply lengths of pipe at the Company's convenience but in any such case, these will be supplied at the same rate per metre run as standard lengths. Tenders shall remain open for acceptance for a period of 30 days from the date of the tender unless in the tender some other period is specified or accepted. 5.

DELIVERY

Unless the contract otherwise stipulates, the risk in the Goods passes to the Customer when the Goods are collected from the Company's works or delivered to the Customer's premises or site and the Company accepts no responsibility for any damage thereafter. Whilst every effort is made to meet collections, delivery arrangements or performance dates these are approximate only and unless otherwise expressly stated, time is not of the essence for delivery or performance and the Company will not be liable in any circumstances for the consequences of any delay in delivery or performance or failure to deliver or perform. No delay shall entitle the Customer to either refuse to take delivery of or make payment for any order or part of any order or repudiate any contract with the Company. Where delivery is made by the Company to the Customer, the Company will only consider a claim by the Customer in respect of loss or damage in transit if the Customer: 5.1 gives written notice to the Company within 21 days of non-delivery or within seven days of delivery of the Goods in any other case; and 5.2 complies in all respects with the freight carrier's conditions of carriage for notifying claims for loss or

damage in transit where the Goods are transported by an independent freight carrier. Offers to deliver Goods are for delivery by motor lorry to a good hard road with reasonable access nearest to the site where the Goods are to be used or stored on the mainland of Britain. Without prejudice to any other rights of the Company, if for any reason the Customer is unable to accept delivery of the Goods when the Goods are due and ready for delivery, the Company may arrange storage of the Goods at the Customer's risk and the Customer shall be liable to the Company for the reasonable costs (including insurance) of such storage. On the arrival of the Company's delivery vehicle at the delivery address, the Customer shall be responsible for the unloading of the Goods which he will do promptly. The Customer shall be responsible for any damage during unloading and for all costs occasioned by his undue delay in commencing or carrying out this work or by his failure to unload. The Company's fold fork unloading service may be requested at the time that the original order is placed. Although the Company endeavours to fulfil Customer requests, no guarantee can be given that this service will be available for any particular delivery. When products are unloaded by the Company's fold fork, firm ground and sufficient space for manoeuvring are required. Where these conditions are met, the Company will normally take responsibility for the safe unloading of such Goods. However the driver is entitled to refuse to drive over ground which he considers unsuitable. The Customer will be responsible for all loss or damage to the Goods or the vehicle or equipment of the Company resulting from the nature of the ground where that ground is or proves to be unsafe or suspect, whether the Customer was aware of the condition of the ground or not. Should any injury be caused to any employee of the Company whilst unloading the Goods, the Customer agrees to indemnify the Company in respect of all such claims that may be made against the Company. 6.

QUALITY & STANDARDS WARRANTY AND LIMIT OF RESPONSIBILITY

6.1 It shall be the responsibility of the Customer to: 6.1.1 carefully inspect and check the Goods or work which the Company supplies as soon as practicable after receipt thereof to ensure that they are in accordance with the order placed by the Customer. This should preferably be done before signature of the Company's delivery note or failing that within 10 working days of receipt of the Goods or execution of the said work after which period the Customer shall be deemed to have accepted the Goods or work. The Customer agrees that such a period is reasonable (the "Requisite Time"). The Customer's rights of acceptance and/or rejection of the Goods shall be construed in all respects in accordance with this clause and any other rights of the Customer in respect of acceptance and/or rejection whether statutory or otherwise are hereby excluded; 6.1.2 take all steps which are reasonably practicable to mitigate any loss in respect of any Goods which are defective and the Company shall not be responsible for any loss which would have been avoided if such steps had been taken. The Company warrants that it will (at the Company's choice) repair or replace any Goods which are accepted by the Company as being defective or not in accordance with the contract within a period of three months from the date of despatch of such Goods from the company's works ("The Warranty Period") with the Company to be the sole arbiter as to whether the Goods are defective, The Company will require a reasonable period of time to repair or replace the Goods. This warranty does not extend to any Goods not manufactured by the Company or to second-hand or reconditioned Goods. The Customer's remedies in respect of any claim under the forgoing express warranty or any claim under any condition or warranty implied by law or any other claim in respect of the Goods or any workmanship in relation thereto (whether or not due to or caused by the negligence of the Company) shall be limited to the replacement or repair of the Goods at the election of the Company. Any condition or warranty implied by

39

General Conditions of Sale law shall cease to apply as from expiry of the Warranty Period.

thereafter not be entitled to reject the remainder of the Goods.

The Company's liability in respect of any loss whether direct or consequential for any reason whether under the warranty or any condition or warranty implied by law shall in all cases be limited in value to the total of the Company's invoice in respect of the said Goods or work.

9.

The Company will not be liable for any claim in respect of any Goods either manufactured or supplied by the Company after such Goods have been laid, erected, subjected to any process or processes or otherwise used by the Customer or others beyond the Company's control in a manner contrary to the Company's recommendation or to good practice. Except as provided for in clauses in these conditions, the Company shall not in any circumstances (whether caused by the negligence of the Company or not) be liable for any damages, compensation, costs, expenses, losses or other liabilities whether direct or consequential and any other remedy which would otherwise be available in law is hereby excluded except to the extent that such exclusion is prohibited by any rule of law. No liability will be accepted in respect of any error or omission in any layout drawing, plan, schedule or recommendation which the Company may submit to the use of any Goods which the Company may supply.

The Company reserves the right to subcontract the whole or any part of the contract.

Certain bought in products in the Company's price list are not manufactured in the Company's factories and consequently are not covered by the Company's BS registration. These products are subject to the Company's full documented purchase and control procedures which are monitored by the BSI.

All contracts are governed by English law unless expressly agreed to the contrary and the parties hereby submit to the exclusive jurisdiction of the English Courts.

Where seconds quality Goods are offered, these are made by the same processes as best quality Goods but during manufacture have become faulty. Orders for seconds quality Goods will not be accepted subject to a condition that such Goods are subject to any specification or approval by any person after delivery. 7.

RETURNS

Without prejudice to Clause 5 the Company will not be responsible to accept the return of Goods duly supplied in pursuance of the Customer's order. In any case, where the Company agrees to accept the return of Goods so supplied, this will in the absence of agreement to the contrary be subject to the Company's normal haulage and restocking charges at the time. The cost of packaging will be charged by the Company to the Customer in addition to the price of the Goods and will be charged at the rate published by the Company at the date when the Customer's order is accepted by the Company and must be paid before the end of the month following the month in which the delivery of the Goods is made. Provided the packaging is returned to the Company in a reasonable condition and within reasonable time, full credit will be given to the Customer for the price paid for all packaging which is returned to the Company in addition to a further credit at the rate published by the Company at the time the packaging is returned. Provided the Company is given reasonable notice and one of the Company's vehicles is in the vicinity, the Company will collect the packaging without charge and the credits referred to above will apply. However, should a specific journey or diversion be necessary the Company reserves the right to charge haulage in respect of the collection of packaging. It is the Customer's responsibility to assemble all packaging for collection in cases where the Company agrees to collect packaging and to load them on to the Company's vehicle without delay and any excessive waiting time incurred by the Company will be charged at such rate as the Company considers reasonable in order to compensate it for any related downtime. 8.

RIGHT OF REJECTION

Notwithstanding clause 5 if, for any reason the Customer purports to accepts only a proportion of the Goods supplied, he shall be deemed to have accepted the whole of the Goods. The Customer will

40

HEALTH AND SAFETY

The Customer agrees to pay due regard to any information or any revised information whenever supplied by the Company or where the Goods are supplied direct from the manufacturer, supplied by the manufacturer (and it is deemed to have been given adequate information and to have read and understood it) relating to the use for which the Goods are designed or have been tested or concerning the conditions necessary to ensure that they will be safe and without risk to health at all times when they are being set, used, cleaned or maintained by any person at work or when they are dismantled or disposed of, and the Customer undertakes to take such steps as may be specified by the above information to ensure that as far as reasonably practicable, the Goods will be safe and without risk to health at all times as mentioned above. For these purposes the Customer is deemed to have been given a reasonable opportunity to test and examine the Goods before delivery. The Customer agrees to provide sufficient instruction and equipment to those who use the Goods to ensure their safety. The Customer agrees to indemnify the Company for loss or damage caused by any breach of this clause. 10. SUBCONTRACTING 11. OVERSEAS SALES

Health and Safety Product data for clay drainage materials and ancillary products supplied by Naylor Drainage Limited. HEALTH AND SAFETY AT WORKS ACT 1974 SECTION 6 CONSUMER PROTECTION ACT 1987 SCHEDULE 3 CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH REGULATIONS 1988 COSHH DATA SHEET No. 1

DATA SHEET NO. 2

Substance

Naylor Joint Lubricant.

Vitrified Clay Dust.

Description

A vegetable oil based soap lubricant used as an aid to pipe jointing.

Dust emission which may be created by cutting vitrified pipes with a dry cutting wheel or saw.

Health Hazard

Will not present any hazard provided good standards of hygiene and safety are practiced, wear suitable P.P.E; eg. Gloves and eye protection.

This dust contains some free silica. Good standards of health and safety should be practiced as follows.

Ingestion

Will be unpleasant but non toxic and will not cause any harm. Do not induce vomiting.

Inhalation

Should be avoided by use of a face mask or other suitable respiratory protection.

Eye/Skin Contact

Wash with clean water.

Should be avoided by use of suitable eye protection. Any dust particles trapped in the eye should be removed as quickly as possible using cool clean water. In case of difficulty the patient should seek medical advice.

Recommendations

Should be stored indoors in the containers provided and protected from extremes of temperature.

It is strongly recommended that one of the following cutting methods should be used so that dust is not produced. Either: a) Use Naylor pipe cutters (Ring or Chain pattern) and avoid dust emission completely. B) “Wet Cut” using water to prevent the emission of clay dust.

FOR FURTHER COSHH INFORMATION CONTACT NAYLOR INDUSTRIES CLAY & PLASTIC PRODUCTS

NAYLOR

NAYLOR DRAINAGE LIMITED

DRAINAGE A MEMBER OF THE NAYLOR GROUP OF COMPANIES

CLOUGH GREEN CAWTHORNE BARNSLEY, SOUTH YORKSHIRE S75 4AD

TELEPHONE: 01226 790591 FACSIMILE: 01226 791531 EMAIL: [email protected] WEB: WWW.NAYLOR.CO.UK

41

Health and Safety Product data for clay drainage materials and ancillary products supplied by Naylor Drainage Limited. HEALTH AND SAFETY HAZARD DATA SHEET Code Number 7 PLASTIC COMPONENTS Revision Date 19/12/02 Material/Product

Plastic Components

Composition/Ingredient

Polyethylene and Polypropylene Plastics.

Hazards Identification

No hazard in normal use. Hazard of toxic fumes/smoke if exposed to high temperature (as in fire).

First Aid Measures

If exposed to high temperature fumes remove patient to fresh air. Seek medical attention.

Fire Fighting Measures

Extinguish with Foam, Dry Chemicals, Water Spray, Carbon Dioxide. Wear breathing apparatus.

Accident Release Measures

Plastic is unlikely to release into Environment.

Handling and Storage

Wear gloves when handling, wash hands after handling. Store away from heat and chemicals.

Exposure Controls/ Personal Protection

No special controls required.

Physical and Chemical Properties

Will burn with extreme heating giving off toxic fumes . Generally very good chemical resistance. Attacked by some Organic / Aromatic Solvents and Oxidising Chemicals.

Stability and Reactivity

Stable below 140°c. Chemically stable in normal use.

Toxicological Information

Plastic materials are not particularly toxic but are not designed to come into contact with food. Wash hands after handling and wear gloves.

Ecological Information

Traces of oils / chemicals from manufacture may remain on surface of components. Do not store in bulk unless under cover or these substances may wash into watercourse.

Disposal Considerations

Do not dispose of by burning. Disposal should comply with Local Authority Regulation. Do not dump.

Transport Information

No special Transport arrangements are required.

Regulatory Information Other Information

Date of Issue: This information is based on our present state of knowledge and is intended to describe our products from the point of view of safety requirements. It should not be construed as guaranteeing specific properties.


NAYLOR


DRAINAGE

42

A MEMBER OF THE NAYLOR GROUP OF COMPANIES



Health and Safety Product data for clay drainage materials and ancillary products supplied by Naylor Drainage Limited. HEALTH AND SAFETY HAZARD DATA SHEET Code Number 8 PLASTIC COMPONENTS (PVC-u) Revision Date 02/01/03 Material/Product

Plastic Components (PVC-u)


Un-plasticised Poly Vinyl Chloride Plastic .


No hazard in normal use.

First Aid Measures

If exposed to high temperature fumes remove patient into fresh air. Medical attention should be obtained immediately.


Extinguish with Foam, Dry Chemicals, Water Spray, Carbon Dioxide. It is important to advise Fire-Fighting Personnel to wear protective clothing and full face masks. Suitable Breathing Equipment should be worn. Fumes are highly corrosive.


UPVC Plastic is unlikely to be accidentally released into the Environment.


Wear gloves when handling. Wash hands after handling. Store away from heat and chemicals.


No special controls require


Will burn in extreme heating giving off corrosive and toxic fumes Generally has good chemical resistance. Attacked by some Organic/ Aromatic Solvents and Chemicals.


Chemical stable in normal use. Will break down in fire or contact with corrosive substances.


Plastic materials are not particularly toxic but are not designed to come into contact with food. Wash hands after handling and wear gloves.


Traces of Oils/Chemicals from manufacture may remain on surface of components. Do not store in bulk unless under cover or these may wash into water course.


Do not dispose of by burning. Disposal should comply with the Local Authority Regulations. Do not dump.


No special transportation arrangements are required.

Regulatory Information

No specific information.

Other Information

Date of Issue: This information is based on our present state of knowledge and is intended to describe our products from the point of view of safety requirements. It should not be construed as guaranteeing specific properties.

Hazard of toxic fumes (including Highly Acidic Hydrogen Chloride) if exposed to high temperatures.


NAYLOR


DRAINAGE A MEMBER OF THE NAYLOR GROUP OF COMPANIES



43

Health and Safety Product data for clay drainage materials and ancillary products supplied by Naylor Drainage Limited. HEALTH AND SAFETY HAZARD DATA SHEET Code Number 4 CAST POLYESTER JOINT Revision Date 19/12/02 Material/Product

Cast Polyester Joint (For Vitrified Clay Sewer Pipes)


Cast Polyester Resin with silica flour filler (quartz).


Flammable if very strongly heated (as in fire) releasing toxic fumes. No hazards in normal use.

First Aid Measures

In fire wear breathing apparatus. If fumes are inhaled remove patient to fresh air. Seek medical help.


Flammable if very strongly heated; Extinguish with Foam, Dry Chemicals or Water Spray. Wear Breathing Apparatus.


This substance is unlikely to be released into the Environment.


Store away form extreme heat, wash hands after handling.


Observe normal standards of industrial hygiene. Wear gloves when handling.


Thermo set Polyester hardness 30-60 ShoreE D containing silica filler (60% ). Stable in normal use. Attacked by Alkalis and many organic solvents.


Stable in normal use. Will decompose if strongly heated. Reacts with various Chemicals.


Could be Toxic if contact with food products. Wear gloves/wash hands after handling.


In normal service the materials is not harmful to the environment.


Comply with the Local Authority Regulations.


No special transport arrangements are required.

Regulatory Information

No specific information. R23 :- Toxic by inhalation.

Other Information

Date Of Issue: This information is based on our present state of knowledge and is intended to describe our products from the point of view of safety requirements. It should not be construed as guaranteeing specific properties.


NAYLOR


DRAINAGE

44

A MEMBER OF THE NAYLOR GROUP OF COMPANIES



Collection Points Cawthorne

Naylor Drainage Ltd Clough Green, Cawthorne, Barnsley, S. Yorkshire S75 4AD Tel: 01226 790591 Fax: 01226 790531

Methil

Ossett

Tel: 01924 267286

Tipton

Ossett Naylor Drainage Ltd 45-49 Cowley Street, Methil Leven, Fife KY8 3QQ Tel: 01592 717900 Fax: 01592 717906

NAYLOR DRAINAGE

A member of the Naylor Group of Companies

NAYLOR DRAINAGE LIMITED CLOUGH GREEN CAWTHORNE BARNSLEY S. YORKSHIRE S75 4AD


Tel: 0121 522 0290

EXPORT TEL: +44 (0) 1226 794028/57/74 FAX: +44 (0) 1226 791376 EMAIL: [email protected]

DRAINAGE - CLAY & PLASTICS SCOTLAND & IRELAND TEL: 01592 717900 FAX: 01592 717906 EMAIL: [email protected]

CUSTOMER SERVICES TEL: 01226 794010

ENGLAND North East TEL: 01226 794045 North West TEL: 01226 794008 Midlands TEL: 01226 794014 East Anglia TEL: 01226 794030 South East TEL: 01226 794015 South West/Wales TEL: 01226 794055

SPECIALIST PLASTICS TEL: 0121 522 0290 FAX: 0121 522 0299 EMAIL: [email protected]

FURTHER INFORMATION Technical literature and price lists on all of the mentioned products are available from the NAYLOR MARKETING DEPT. TEL: 01226 794059 FAX: 01226 794415 E-MAIL: [email protected] WWW.NAYLOR.CO.UK

e m a i l : s a l e s @ n a y l o r. c o . u k

FAX: 01226 791531 FAX: 01226 791531 FAX: 01226 791531 FAX: 01226 791531 FAX: 01226 791531 FAX: 01226 791531

EMAIL: [email protected]

w e b : w w w. n a y l o r. c o . u k

NAYLOR NAYLOR DRAINAGE LTD CLOUGH GREEN, CAWTHORNE, BARNSLEY, S75 4AD

DRAINAGE

NAYLOR Clay & Plast ic Products DRAINAGE

Recommend Documents