TAI MILANO S.p.A.
Our Company was founded in 1959 and since 1962 we have been manufacturing safety valves for industry in general and, in particular, for the petrochemical, chemical and refining industry, power boilers and steam plants. Our Milan office has approximately 1,000 m2 of floor space and is situated close to the Central Station. Our factory, located in Guardamiglio near Piacenza, occupies a total of 13,000 m2 comprising a covered area of 6,500 m2 and is modernly equipped to handle a monthly production of 600 valves. The range of types, dimensions and ratings is vast and can satisfy the most varied and complex requirements.
Our Company
TAI MILANO S.p.A.
In addition, we have a sales representation and manufacturing agreements for Italy which permits us to furnish rupture discs, safety heads and safety valve/rupture disc combinations. Quality is guaranteed by our Company's quality system, which is operated by highly qualified personnel under the guidance of authoritative management in accordance with ISO 9001. Experience, combined with the importance given to research, experimental work and the quality of our products have classed the company as one of the most important and innovative manufactures of these types of valves in the European market. Following results of tests and controls, our valves have been approved by ISPESL (ex ANCC), RINA, Lloyds Register of Shipping, DNV, Polish, Chinese and Russian Authorities).
In addition
TAI MILANO S.p.A.
Product Range Relief Valves – Pilot Operated Series 9000
Relief Valves – Spring Loaded Steam Valves Series 200 Gas and Liquid Valves Series 3000 Series 4000 Series 5000
Relief Valves – Electrically Actuated Series 100
Changeover Valves Series 1000
TAI MILANO S.p.A.
Pilot Operated Safety Valves Series 9000 Pilot Operated Valves suitable for Liquid and Gas applications. Main Features Inlet Sizes: Orifice Sizes: Set Pressure Range: Temperature Range: Overpressure Range: Materials:
Up to 14” D to V inclusive 0.3 to 520 bar g minus 60 to 232° C 1 to 5% Carbon or Stainless Steel or Special alloys
Fixed or Adjustable Blowdown (2% min) with Full Nozzle design. Face to centre dimensions conforming to API Std. 526 available.
TAI MILANO S.p.A.
Series 9000
TAI MILANO S.p.A.
Series 9000
TAI MILANO S.p.A.
Series 9000
TAI MILANO S.p.A.
Series 9000
TAI MILANO S.p.A.
Series 9000
TAI MILANO S.p.A.
9000+CV
TAI MILANO S.p.A.
Change Over Valves Series 1000 Main Features Inlet Sizes: Ratings: Materials:
1” to 14” ASME 150 to ASME 600 Carbon Steel, Stainless Steel or Duplex
Also available with interlocking system.
TAI MILANO S.p.A.
Steam Safety Valves Series 200 High pressure steam safety valves with inlet flanged or prepared for butt welding. Main Features Inlet Sizes: Orifice Size: Set Pressure Limit: Temperature Limit: Overpressure Range: Materials:
Up to 6” G to R inclusive 320 bar g 543° C 3% Carbon or Stainless Steel or Special alloys.
Adjustable Blowdown (4% max) with Full Nozzle design. Lifting Lever and Test Gag are supplied as standard accessories.
TAI MILANO S.p.A.
Series 200
TAI MILANO S.p.A.
Conventional or Bellows Type Valves Series 3000 Conventional spring loaded or bellows sealed safety valves with flanged inlet and outlet connections. Main Features Inlet Sizes: Orifice Sizes: Set Pressure Range: Temperature Range: Overpressure Range: Materials:
Up to 8” D to T inclusive 0.5 to 420 bar g minus 267 to 540° C 10% Carbon or Stainless Steel or Special alloys.
Adjustable Blowdown (5% of set pressure or 0.15 kgf/cm²) with Full Nozzle design. Lifting Lever and Test Gag are supplied as standard accessories.
TAI MILANO S.p.A.
Series 3000
TAI MILANO S.p.A.
Series 3000
TAI MILANO S.p.A.
Conventional or Bellows Type Valves Series 4000 Conventional spring loaded or bellows sealed safety valves with inlet & outlet connections screwed or flanged. Main Features Inlet Sizes: Orifice Sizes: Set Pressure Range: Temperature Range: Overpressure Range: Materials:
Up to 2” e to h inclusive 0.3 to 430 bar g minus 200 to 400° C 10% Carbon or Stainless Steel or Special alloys.
Adjustable Blowdown (5% of set pressure or 0.15 kgf/cm²) with Full Nozzle design. Lifting Lever and Test Gag are supplied as standard accessories.
TAI MILANO S.p.A.
Conventional or Bellows Type Valves Series 5000 Conventional spring loaded or bellows sealed safety valves with flanged inlet and outlet connections and designed specifically for High Back Pressure Applications. Main Features Inlet Sizes: Orifice Sizes: Set Pressure Range: Temperature Range: Overpressure Range: Materials:
4” , 6” and 8” P to T inclusive 28 to 108 bar g minus 60 to 300° C 10 to 25% Carbon or Stainless Steel or Special alloys.
Lifting Lever and Test Gag are supplied as standard accessories.
TAI MILANO S.p.A.
Series 5000
TAI MILANO S.p.A.
Electrically Operated Valves Series 100 Electrically Operated safety valves for steam service with inlet flanged or prepared for butt welding and flanged outlet connection. Since valve is solenoid operated via a pressure switch, alternative operating system can be provided utilising signal from pressure transmitter via Distributed Control System. Main Features Inlet Sizes: Set Pressure Limit: Temperature Limit: Overpressure Range: Materials:
TAI MILANO S.p.A.
Up to 6” 310 bar g 543° C None Carbon or Stainless Steel or Special alloys.
Series 100
TAI MILANO S.p.A.
Commercial Network ABU DHABI PETROPROJECTS GROUP Mr. Munther Quzeiha P.O. Box 7833 Abu Dhabi Tel.: +971 2 6660554 Fax: +971 2 6668013
CROATIA PANON Mr. Vukelic A. Stipancica 24/1 10000 Zagreb Tel.: +385 1 6522775 Fax: +385 1 6522774
EGYPT TAWAKOL ENTERPRISES Mr. A.A. Tawakol 70 El Thawra Street Heliopolis, Cairo 11341 Tel.: +20 2 291 6482 Fax: +20 2 291 7985
TAI MILANO S.p.A.
GREECE ADOPTA LTD. Mr. P. Charbilas 17 Aiginis Str. & Strofiliou Str 14561 Kifissia Tel.: +30 1 7225052 Fax: +30 1 8077486
IRAN IRAN OFOGH INDUSTRIAL DEVELOPMENT CO. Mr. Shakoorian 32 Yeganeh Street North Iranshahr Tehran 15847 Tel.: +98 21 8828518 / 8824808 Fax: +98 21 832910
JORDAN CONTRACTING & DEVELOPMENT CO Mr. Hikmat Khimmash P.O. Box 6147 Jabal Amman, First Circule nr. Iraqi Embassy Amman Tel.: +962 6 4625261 / 4637314 Fax: +962 6 4629431
Commercial Network MALAYSIA HEXAMAS SDN BHD Mr. Faisal Siebel - Technical Director 28, Jalan Sibu 8 Taman Wahyu, Off Jalan Ipoh 68100 Kuala Lumpur Tel.: +603 626 2788 Fax: +603 626 3788
NETHERLANDS HITMA B.V. MR. Lester Millard MR. Edvin Steven Anton Philipsweg, 1 Postbus 175 1420 AD Uithoorn Tel.: +31 297 515111 Fax: +31 297 514777
NORWAY FLOCHEM A/S Mr. Herlog Berge Gamle Drammensvei 48 P.B. 15 N-1321 Stabekk Tel.: +47 675 16700 Fax: +47 675 16701
TAI MILANO S.p.A.
SPAIN IESSEBI Mr. Gamba C. Juan B. Zabala 3 48990 Algorta (Vizcaya) Tel.: +34 4 4910612 Fax: +34 4 4609170
SPAIN VALVULAS NACIONAL Mr. J. M. Alves Poligono Industrial Can Jardi Aptdo. 123 DP 08191 Rubi (Barcelona) Tel.: +34 936 995200 Fax: +34 936 974556
SINGAPORE PNR ENGINEERING Pte Ltd Mr. Tan Good Swee 35 Tannery Road, #11-10 Tannery Block, Ruby Industrial Complex 347740, Singapore Tel.: +65 7428911 Fax: +65 7428700
Commercial Network SULTANATE OF OMAN ARABIAN ENGINEERING SERVICES LLC Mr. A.A. Nomani P.O. Box 3000 Ruwi, Postal Code 112 Tel.: +968 560475 Fax: +968 560486
UNITED KINGDOM TAI MILANO AREA OFFICE Mr. Mike MacGregor 2 Quoits Field, Claydon Ipswich IP6 0AY Tel.: +44 1473 830000 Fax: +44 1473 831020 E-Mail:
[email protected] Website: www.mrmuk.com
TAI MILANO S.p.A.
Our Bars Stock
TAI MILANO S.p.A.
Our Springs Stock
TAI MILANO S.p.A.
Our Castings Stock
TAI MILANO S.p.A.
Our Castings Stock
TAI MILANO S.p.A.
Our Packing Department
TAI MILANO S.p.A.
Our CNC Machines
TAI MILANO S.p.A.
Our CNC Machines
TAI MILANO S.p.A.
Our CNC Machines
TAI MILANO S.p.A.
Our CNC Machines
TAI MILANO S.p.A.
Our CNC Machines
TAI MILANO S.p.A.
Our CNC Machines
TAI MILANO S.p.A.
Our CNC Machines
TAI MILANO S.p.A.
Our CNC Machines
TAI MILANO S.p.A.
Our Lapping & Stelliting Facilities
TAI MILANO S.p.A.
Our Hydrotesting Facilities
TAI MILANO S.p.A.
Our Control Department Surface control & hardness machine
TAI MILANO S.p.A.
Profile Projector
Our Assembling Facilities
TAI MILANO S.p.A.
THANK YOU FOR YOUR ATTENTION
TAI MILANO S.p.A. Via Petrella 21 - 20124 MILANO (ITALY) Tel.: +39 02 29525941 - Fax: +39 02 29404417 WEB: www.taimilano.it - Email:
[email protected]
