MV
Tri-Clover® Miscellaneous Valves
Tri-Clover® Miscellaneous Valves
Introduction The complete line of products offered by Tri-Clover, Inc. for the food, beverage, dairy and biopharmaceutical process industries include the Tri-Clover C and CL series of centrifugal pumps, PR and T series positive displacement pumps, 700 series air operated seat valves, Saunders diaphragm valves, Tri-Clamp® and Tri-Weld® fittings, Mainstream® and Streamline® filter/ strainers, and Tri-Blender® powder/liquid blending system. These products are well known and synonymous with Tri-Clover. Less visible components such as the plug valve, pressure relief valve, and check valve are also vital to the operation of any processing system. These miscellaneous valves are given the same degree of attention in manufacture and quality control as the more prestigious products, such as pumps and air operated seat valves.
Ordering Information Sizes and material options vary with each type of valve. Specific information is listed for each valve type. Basic instructions for ordering are as follows: Specify complete part number including: description code, size, and material (if more than one option is available). MODEL NUMBER EXAMPLE 1
2
3
D10MPR - 1 - 316L 2
1
DESCRIPTION
t
000
0 3
000 MATERIAL 304 316L
SIZE 1" (25.4 mm) 1½" (38.1 mm) 2" (50.8 mm) 2½" (63.5 mm) 3" (76.2 mm) 4" (101.6 mm) Availability of sizes varies with each valve type.
For Example: D60YRMP-1½-316L = Y-Type Compression valve with molded rubber seat, 1½" Tri-Clamp® connections and 316L material. A30SMP-2½-316L-SFY= Sample cock, 2½" Tri-Clamp® connections, 316L material and SFY elastomers. DL10WWR-2-316L = Two way plug valve (rubber plug) with 2" Buttweld connections, 316L material. 62-326-B-3-316L = Air-blow check valve, 4000 cubic feet/hour capacity, rubber hose adapter, 3" TriClamp® connection and 316L material. Sanitary fittings identified with this symbol on the following pages are accepted as meeting the 3A sanitary standards by the appropriate committees of the International Association of Milk, Food and Environmental Sanitarians, U.S. Public Health Service, and Dairy Industry Committee. NOTE: Catalog product presentations including cataloged dimensions, designs and specifications are representative of product availability at time of publication only. Actual geometry, dimensions, and designs are subject to design and manufacturing changes without notice.
© 2000 Tri-Clover, Inc.
3
Compression & Relief Valves (Manual) Manual valves designed to relieve pressure, sample, or shut off flow
Types n Shut Off (L-Body, Y-Body) n Relief (L-Body) n Sample
Seat Materials n Molded Rubber (BUNA, EPDM, SFY) n Metal (Not Available for Sample Valves)
End Connections n Tri-Clamp®
Sizes n Shut-Off/Relief (1" - 3") n Sample (1½" - 3")
Valve Body Material n 316L S.S.
4
Compression Valves (T-Type) D60TRMP-Size, Molded Rubber Seat D60TMP-Size, Metal Seat Size (Tube OD)
B A
Min.
Approx. Wt.
Max.
in
mm
in
mm
in
mm
in
mm
lb
kg
1
25.4
2³⁄₈
60.3
5¹⁄₈
130.2
6¹⁄₄
158.8
2.50
1.13
1¹⁄₂
38.1
2³⁄₄
69.9
6⁷⁄₈
174.6
8¹⁄₂
215.9
5.25
2.38
2
50.8
3¹⁄₂
88.9
7³⁄₈
185.7
9¹⁄₂
241.3
7.30
3.31
2¹⁄₂
63.5
3¹⁄₂
88.9
8⁷⁄₈
225.4
11¹⁄₂
292.1
11.4
5.17
3
76.2
3³⁄₄
95.3
9¹⁄₄
235
12³⁄₈
314.3
15.5
7.03
B
A
Material: 316L Stainless Steel End Connection: Tri-Clamp®
A
Relief Valves D60RTHMP-Size, Metal Seat - only Size (Tube OD)
B A
Min.
Max.
Approx. Wt.
in
mm
in
mm
in
mm
in
mm
lb
kg
1
25.4
2³⁄₈
60.3
5³⁄₈
136.5
6¹⁄₂
165.1
1.88
0.85
1¹⁄₂
38.1
2³⁄₄
69.9
7³⁄₈
185.7
9
228.6
3.99
1.81
2
50.8
3¹⁄₂
88.9
7⁵⁄₈
193.7
9⁵⁄₈
244.5
5.49
2.49
2¹⁄₂
63.5
3¹⁄₂
88.9
9⁷⁄₈
250.0
12
304.8
8.56
3.88
3
76.2
3³⁄₄
95.3
11¹⁄₈ 282.6 13⁷⁄₈ 352.4 12.13
5.50
Material: 316L Stainless Steel (Hex Union Nut is 304 S.S.) End Connection: Tri-Clamp® Std. spring rate is 5-25 psi (5-15 psi on 1"). Contact Tri-Clover for optional relief spring ranges. All dimensions are for identification purposes only.
5
Compression Valves (Y-Type) D60YRMP-Size, Molded Rubber Seat D60YMMP-Size, Metal Seat B Size (Tube OD)
A
Min.
Approx. Wt.
Max.
B
in
mm
in
mm
in
mm
in
mm
lb
kg
1
25.4
5³⁄₈
136.5
5³⁄₄
146.1
6³⁄₈
161.9
2.25
1.02
1¹⁄₂
38.1
6³⁄₈
161.9
8
203.2
9⁵⁄₈
244.5
6.30
2.86
2
50.8
7⁷⁄₈
200.0
8³⁄₄
222.3
11
279.4
9.90
4.49
2¹⁄₂
63.5
9¹⁄₄
235.0
10³⁄₈
263.5
13¹⁄₂
342.9
18.0
8.16
3
76.2
10³⁄₈
263.5
12¹⁄₂
317.5
16³⁄₈
415.9
26.1
11.8
A
Material: 316L Stainless Steel End Connection: Tri-Clamp®
Sample Cocks
Tri-Clamp®
Bevel Seat Type-Size
Size (Tube OD)
A30SMP Tri-Clamp A
A30SA Bevel Seat A
in
mm
in
mm
in
mm
lb
kg
1¹⁄₂
38.1
2
50.8
1⁷⁄₈
47.6
1.00
0.45
2
50.8
2¹⁄₂
63.5
2³⁄₈
60.3
1.06
0.48
3
76.2
3¹⁄₂
88.9
--
--
--
--
Material: 316L Stainless Steel All dimensions are for identification purposes only.
6
Approx. Wt.
Plug Valves
n Designed for low pressure and temperature applications (less than 25psig, max. 100° F). n Designed for use with non-hazardous products and are subject to leakage due to normal operating and cleaning procedures (COP, “Clean Out of Place.”) n Rubber compound is FDA approved BUNA for plug material. n Pasteurizer Leak Detect type is approved for tank pasteurizer valves.
Sizes n Sizes range from 1" to 3" (see each type for specific sizes available)
End Connections n Tri-Clamp® weld or Bevel Seat (see each type for specific end connections available)
Valve Body Material n 316L or 304
7
Plug Valves
Tri-Clamp Two-Way D10MPR-Size-Mat'l, Rubber Plug D10MP-Size-Mat'l, Metal Plug Size (Tube OD)
A
Tri-Clamp Three-Way D11MPR-Size-Mat'l, Rubber Plug D11MP-Size-Mat'l, Metal Plug
B
C
D
Approx. Wt.
E
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
lb
kg
1
25.4
2⁹⁄₃₂
57.9
4⁹⁄₁₆
115.9
5³⁄₄
146.1
4¹⁄₂
114.3
2³⁄₈
60.3
4.50
2.04
1¹⁄₂
38.1
2²⁹⁄₃₂
73.8
5¹³⁄₁₆
147.6
7
177.8
5⁵⁄₈
142.9
2¹⁄₂
63.5
9.50
4.30
2
50.8
3¹³⁄₃₂
86.5
6¹³⁄₁₆
173.0
7⁵⁄₈
193.7
5⁵⁄₈
142.9
2⁷⁄₈
73.0
15.50
7.03
2¹⁄₂
63.5
4¹⁄₈
104.8
8¹⁄₄
209.6
8³⁄₄
222.3
6¹⁄₄
158.8
3¹⁄₂
88.9
25.50
11.56
3
76.2
4²³⁄₃₂
119.9
9⁷⁄₁₆
239.7
9³⁄₄
247.7
7¹⁄₄
184.2
3³⁄₄
95.3
36.00
16.32
Material: 316L or 304 stainless steel (316L and S for 304 in part number).
All dimensions are for identification purposes only.
8
Plug Valves
Bevel Seat Two-Way D10CR-Size-Mat'l, Rubber Plug D10C-Size-Mat'l, Metal Plug Size (Tube OD)
A
Bevel Seat Three-Way D11CR-Size-Mat'l, Rubber Plug D10C-Size-Mat'l, Metal Plug
B
C
D
Approx. Wt.
E
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
lb
kg
1¹⁄₂
38.1
2²⁹⁄₃₂
73.8
5¹³⁄₁₆
147.6
6⁷⁄₈
174.6
5⁵⁄₈
142.9
2¹⁄₂
63.5
9.50
4.31
2
50.8
3¹³⁄₃₂
86.5
6¹³⁄₁₆
173.0
7⁵⁄₈
193.7
5⁵⁄₈
142.9
2⁷⁄₈
73.0
15.50
7.03
2¹⁄₂
63.5
4¹⁄₈
104.8
8¹⁄₄
209.6
8⁵⁄₈
219.1
6¹⁄₄
158.8
3¹⁄₂
88.9
25.50 11.56
3
76.2
4²³⁄₃₂
119.9
9⁷⁄₁₆
239.7
9³⁄₄
247.3
7¹⁄₄
184.2
3³⁄₄
93.7
36.00 16.33
Material: 316L or 304 stainless steel (316L and S for 304 in part number).
All dimensions are for identification purposes only.
9
Plug Valves D
D
C
C
E
E
A
A
B
B
Tri-Weld Two-Way DL10WWR-Size-Mat'l, Rubber Plug DL10WW-Size-Mat'l, Metal Plug Size (Tube OD)
A
Tri-Weld Three-Way DL11WWR-Size-Mat'l, Rubber Plug DL11WW-Size-Mat'l, Metal Plug
B
C
D
Approx. Wt.
E
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
lb
kg
1¹⁄₂
38.1
2²³⁄₃₂
69.1
5⁷⁄₁₆
138.1
6⁷⁄₈
174.6
5⁵⁄₈
142.9
2¹⁄₂
63.5
9.50
4.31
2
50.8
3³⁄₁₆
81.0
6³⁄₈
161.9
7⁵⁄₈
193.7
5⁹⁄₁₆
141.3
2⁷⁄₈
73.0
15.50
7.03
2¹⁄₂
63.5
4⁷⁄₈
123.8
7³⁄₄
196.9
8⁵⁄₈
219.1
6¹⁄₄
158.8
3¹⁄₂
88.9
25.50 11.56
3
76.2
4¹⁵⁄₃₂
113.5
8¹⁵⁄₁₆
227
9³⁄₄
247.7
7¹⁄₄
184.2
3³⁄₄
95.3
36.00 16.33
Material: 304 stainless steel Caution: Butt-Weld End Dimension is minimum center to face length and will require skillful welding techniques and proper cooling of valve body to prevent warpage. Longer extension available to meet specific requirements. (Price and delivery on application.)
All dimensions are for identification purposes only.
10
Storage Tank/Pasteurizer Valves C
G
E
H I
D B
F G 1½" & 2"
A Side View
J
K 2½" & 3"
D10F-Size, Metal Plug D10FR-Size, Rubber Plug D10FL-Size, Two-Way Valve with Leak Protection (
Inches
F
metal plug only)
Size (Tube OD)
A
B
C
D
E
F
G
H
I
J
K
Hole Size
Approx. Wt. Lbs.
1¹⁄₂
4⁵⁄₁₆
3¹⁄₈
5⁵⁄₈
2³⁄₈
6³⁄₄
1²³⁄₃₂
3⁷⁄₁₆
—
—
—
—
⁹⁄₁₆
9.00
2
5⁷⁄₁₆
4¹⁄₈
5⁵⁄₈
2³⁄₄
7¹⁄₂
2¹⁄₈
4¹⁄₄
—
—
—
—
⁹⁄₁₆
18.30
2¹⁄₂
6³⁄₄
4⁵⁄₈
6¹⁄₄
3¹⁄₂
8³⁄₄
2⁵⁄₈
5¹⁄₄
1⁵⁄₁₆
1¹⁄₂
2¹⁄₂
5
⁹⁄₁₆
28.80
3
8
4³⁄₄
7¹⁄₄
3³⁄₄
9³⁄₄
3⁵⁄₁₆
6⁵⁄₈
1³⁄₄
1³⁄₄
2¹³⁄₁₆
5⁵⁄₈
¹¹⁄₁₆
39.50
Size (Tube OD)
A
B
C
D
E
F
G
H
I
J
K
Hole Size
Approx. Wt. Kg.
38.1
109.5
79.4
142.9
60.3
171.5
43.7
87.3
—
—
—
—
14.3
4.08
50.8
138.1
104.8
141.3
69.9
190.5
54.0
108.0
—
—
—
—
14.3
8.30
63.5
171.5
117.5
157.2
88.1
219.9
66.7
133.4
33.3
38.1
63.5
127.0
14.3
13.06
76.2
203.2
120.7
182.6
93.7
246.9
84.1
168.3
4.5
44.5
71.4
142.9
17.5
17.91
Millimeters
Valves have 45o handle. 1½” and 2” valves have 2-hole mounting - 2½” and 3”, 4-hole mounting. Material: 304 (Add an “S” to designate 304 S.S.) Connection: Bevel Seat
Rubber Plug Replacements
D10CR-Size-02X, Two-Way D11CR-Size-02X, Three-Way Size (Tube OD) in
mm
1¹⁄₂
38.1
2
50.8
2¹⁄₂
63.5
3
76.2
Includes the complete plug assembly (rubber plug, handle and stud). Field experience has shown that most stainless steel plug valves cannot be successfully covered to rubber plug valves. Results obtained are generally not in proportion to the conversion cost or service life obtained.
All dimensions are for identification purposes only.
11
Check Valves n Meet 3A approvals for design
Sizes n Disc-Type Check Valve in vertical or horizontal design, 1" to 3" n Ball Check Valve Y-Type, 1" to 3" n Air-Blow Check Valve Assemblies, 1½" to 4½" (varies by compression rating, see each type for specific sizes available.)
End Connections n Disc-Type, Tri-Clamp® n Ball Check, Tri-Clamp® or Tri-Weld® n Air Blow, Tri-Clamp®
Ball Materials n n n n
BUNA EPDM SFY Nylon (max. 140° F)
Valve Body Material n Ball Check Valve, 316L n Disc-Type Check Valve, 316L or 304 n Air Blow Check Valve, 316L
12
Check Valves Disk Type B45MP-Size-Mat'l (1" through 2") A45MP-2½-Mat'l (2½" only) B45MP-A-3-316L (3" only) Size (Tube OD)
B45MP-Size-Mat'l (1" through 2") A45MP-2½-Mat'l (2½" only) B45MP-A-3-316L (3" only)
A
Approx. Wt.
in
mm
in
mm
lb
kg
1
25.4
5¹⁄₈
130.1
2.25
1.02
1¹⁄₂
38.1
5¹⁄₈
130.1
3.25
1.59
2
50.8
5¹⁄₈
130.1
4.83
2.19
2¹⁄₂
63.5
6³⁄₈
161.9
7.10
3.22
3
76.2
7¹⁄₂
190.5
--
--
Material Option: 304 or 316L Stainless Steel (3" - 316L only)
A
B45HMP-Size-Mat'l (1", 1½", and 2") A45HMP-2½-Mat'l (2½" only) A
B45HMP-Size-Mat'l (1" through 2") A45HMP-2½-Mat'l (2½" only) B45HMP-A-3-316L (3" only) Size (Tube OD)
A
Approx. Wt.
in
mm
in
mm
lb
kg
1
25.4
7⁵⁄₈
193.7
2.25
1.02
1¹⁄₂
38.1
7⁹⁄₁₆
192.1
3.25
1.59
2
50.8
7⁹⁄₁₆
192.1
4.83
2.19
2¹⁄₂
63.5
10⁷⁄₈
276.2
7.10
3.22
3
76.2
7⁷⁄₁₆
188.9
--
--
Material Option: 316L Stainless Steel B45HMP-A-3-316L (3" only)
To convert to vertical valve, remove spring. One PSI or less line pressure required to overcome spring closing force.
All dimensions are for identification purposes only. See page 17 for pressure drop curves.
13
Check Valves Ball Type 45BYMP-Size-Ball Mat'l* Size (Tube OD)
Inlet
Approx. Wt.
A
in
mm
in
mm
lb
kg
1¹⁄₂
38.1
8¹⁴⁄₃₂
214.3
3.00
1.36
2
50.8
10³⁄₃₂
256.4
3.25
1.47
2¹⁄₂
63.5
11¹⁄₂
292.1
7.69
3.48
3
76.2
12³⁄₈
314.3
10.14
4.59
End Connection: Tri-Clamp®
L45BYWW-Size-Ball Mat'l* Size (Tube OD)
Inlet A
Approx. Wt.
A
in
mm
in
mm
lb
kg
1¹⁄₂
38.1
8⁷⁄₈
225.4
3.99
1.81
2
50.8
10¹⁄₂
266.7
5.49
2.49
2¹⁄₂
63.5
12¹³⁄₁₆
325.4
8.56
3.88
3
76.2
13¹¹⁄₁₆
347.7
12.13
5.50
End Connection: Tri-Weld®
45BY-Size-02-Ball Mat'l*, Replacement Balls
*Ball Material: U = Buna Ball N = Nylon Ball (max. 140° F) SF = Viton Ball E = EPDM Ball Valve Material: 316L Stainless Steel See page 18 for pressure drop curves. All dimensions are for identification purposes only.
14
Size (Tube OD)
Size (Ball)
in
mm
in
mm
1¹⁄₂
38.1
1⁵⁄₈
41.3
2
50.8
2¹⁄₈
54.0
2¹⁄₂
63.5
3¹⁄₂
88.9
3
76.2
4¹⁄₈
104.8
Air-Blow Check Valves Assemblies* *Each air-blow check valve assembly must be used with a #FA-(size)-30C Filter Disc (not furnished with unit). See table on Page 16.
Check Valve Capacity Rating 1600 Cubic Ft./Hour Air Volume (Overall Length)
Connection Size
62-174R-A-Size, Quick Couple Adapter (“A” Adapter)
62-174R-B-Size, Rubber Hose Adapter (“B” Adapter)
62-174R-C-Size, Female NPT Adapter (“C” Adapter)
in
mm
in
mm
in
mm
in
mm
1¹⁄₂
38.1
2¹⁄₂
63.5
3
76.2
2
50.8
2
50.8
2¹⁄₂
63.5
3
76.2
2
50.8
2¹⁄₂
63.5
2¹⁄₂
63.5
3
76.2
2
50.8
3
76.2
2¹⁄₂
63.5
3
76.2
2
50.8
4
101.6
2¹⁄₂
63.5
3
76.2
2
50.8
4¹⁄₂
114.3
2¹⁄₂
63.5
3
76.2
2
50.8
Material: 316L Stainless Steel Check Valve Capacity Rating 4000 Cubic Ft./Hour Air Volume (Overall Length)
Connection Size
62-326-A-Size, Quick Couple Adapter (“A” Adapter)
62-326-B-Size, Rubber Hose Adapter (“B” Adapter)
62-326-C-Size, Female NPT Adapter (“C” Adapter)
in
mm
in
mm
in
mm
in
mm
2
50.8
3³⁄₄
95.3
3⁵⁄₈
92.1
2³⁄₄
69.9
2¹⁄₂
63.5
3³⁄₄
95.3
3⁵⁄₈
92.1
2³⁄₄
69.9
3
76.2
3³⁄₄
95.3
3⁵⁄₈
92.1
2³⁄₄
69.9
4
101.6
3³⁄₄
95.3
3⁵⁄₈
92.1
2³⁄₄
69.9
4¹⁄₂
114.3
3³⁄₄
95.3
3⁵⁄₈
92.1
2³⁄₄
69.9
Material: 316L Stainless Steel All dimensions are for identification purposes only.
15
Air-Blow Check Valves Adapters & Filter Media
A Adapter
B Adapter
C Adapter
Adapter Type
For Model 62-174R
For Model 62-326
“A” Adapter For Air Line Quick Coupler
#37-80
#37-161
“B” Adapter For 1" ID Rubber Hose
#14-MPHR-1-S
#14-MPHR-2 x 1-S
“C” Adapter For Female NPT Connector
(C) #23BMP-1½ x ³⁄₈S for ³⁄₈ NPT Female Connection (C1) #23BMP-1½ x ½S for ½ NPT Female Connection
#23BMP-2 x ¾ S for ¾ NPT Female Connection
Replacement Media Item
For Model 62-174R
For Model 62-326
Filter Disc (0.3 micron)
Order #FA-1½-30C Sold 50/Pkg.
Order #FA-2-30C Sold 50/Pkg.
SS Perforated Disc with Buna Gasket
Order #FAD-1½-01-U Sold in single units
Order #FAD-2-01-U Sold in single units
Filter Disc
SS Perforated Disc with Buna Gasket
See page 18 for Capacity Test Information. All dimensions are for identification purposes only.
16
Appendix
Pressure Drop Curves Model B45 MP 1" through 2½" Check Valve
All curves are tested pressure drop curves, not certified, and should be applied for guideline purposes only. Performance curves are based on tests using 68°F (20°C) water. See page 13 for Check Valve information.
Model B45 MP 3" Check Valve
17
Appendix
Capacity Test & Pressure Drop Curves Disposable Air Filter Media Capacity Test See page 15 for Filter Media information. Air Blow Filter Capacity Test 70
50
62 -1 74 R
Air Supply Pressure (PSI)
60
40
6 -32 2 6
30 20 10 0 0
500 1000 1500 2000 2500 3000 3500 4000 4500 Air Volume in Standard Cubic Feet Per hour
Model 45BYMP Ball Check Valve All curves are tested pressure drop curves, not certified, and should be applied for guideline purposes only. Performance curves are based on tests using 68°F (20°C) water. See page 14 for Check Valve information.
Pressure Drop
H (m) H (FT) 4.3 14
3.7
12
3
10
2.4
8
1.8
6
1.2
4
0.6
2
0
0
GPM 3 Q (m /hr)
0
50
100
150
200
250
300
350
400
450
0
11
23
34
45
57
68
80
91
102
Flow
18
Valves Mix-Proof—Catalog MPV Multiple actuator stem designs with full stroke capability. Air-Actuated—Catalog AV Many styles for automatic flow, and full CIP capability. Also available with optional control top housing. 1"-4" (25.4-101.6mm) sizes. Fractional Sizes—Bulletin FV Type 316L SS. ¹⁄₂" & ³⁄₄" (12.7 and 19.0mm) sizes. Ball—Bulletin BV 3-piece body with PTFE seats and packing. 1"-4" (25.4-101.6mm) sizes. Butterfly—Bulletin BFV Aluminum body. Adaptable to a variety of end connections. 1"- 4" (25.4-101.6mm) sizes. SS Butterfly—Bulletin B51 Stainless steel body. Tri-Clamp® end connections. Variety of seat materials. 1¹⁄₂"-6" (38.1-152.4mm) sizes. Saunders Diaphragm—Catalog SSV For sterile applications. ¹⁄₄"-4" (6.4101.6mm) sizes. Miscellaneous Valves—Catalog MV Compressor, Plug, Relief, and Check Valves. 1"-4" (25.4101.6mm) Tube OD. Following are all registered trademarks of Tri-Clover Inc. Tri-Clover Tri-Clamp Tri-Weld Tri-Taper
Tri-Blender Super-Speed Mainstream Streamline
AL-6XN is a registered trademark of Allegheny Ludlum Corporation.
Pumps C Series Centrifugal—Catalog TF 5 sizes in capabilities to 1150 GPM (261m3/hr). 1¹⁄₂"-6" (38.1-152.4mm) inlet. CL Series Centrifugal—Catalog CL 11 sizes in capacities to 2000 GPM (454 m3/hr). 2¹⁄₂"-4" (63.5101.6mm) inlet. CL WFI (Water For Injection/ Pharmaceuticals)—Bulletin CLWFI 4 sizes in capacities to 700 GPM (159m3/hr). 1¹⁄₂"-4" (38.1-101.6mm) inlet.
Fittings Sanitary Fittings—Catalog FTGS Tri-Clamp®, Tri-Weld ®, and Bevel Seat for the food, beverage, and dairy industry—1"-4" (25.4101.6mm) Bio-Pharm Fittings—Catalog PHARM Tri-Clamp® and Tri-Weld ® mechanical and electropolished fittings for the bioprocessing industry—½"-4" (12.7-101.6mm) AL-6XN®—Bulletin AL6-FTG Sanitary 1"-3" (25.4-76.2mm) Tube OD.
EH Series Centrifugal (Low Shear)— Bulletin EH 3 sizes in capacities to 1000 GPM (227 m3/hr). 3"-6" (76.2- 152.4mm) inlet. PR Series Positive Rotary—Catalog PR
6 sizes to 300 GPM. (68 m3/hr). 1"-6" (25.4-152.4mm) inlet and outlet. T Series Positive Rotary—Bulletin TS (TSR Standard Rotor Design) 12 sizes to 500 GPM/290 PSI. (113m3/hr/20 BAR) 1"-6" (25.4152.4mm) inlet and outlet. (TSK Ultra CIP) 5 sizes to 250 GPM/145 psi (56.5m3/hr/10 bar) 1"-3" (25.476.2mm) inlet and outlet. Diaphragm Pumps—Bulletin AOD 5 sizes to 200 GPM/100 psi. (45m3hr/7 bar) ¹⁄₄"-4" (6.4-101.6mm) inlet and outlet.
Automated Systems Tri-Blender®—Bulletin TB Blends up to 350 lb./min. (159 kg) dry powder with up to 150 GPM. (34 m3/hr). CIP Systems—Bulletin CIP Four standard models. Variations for hot sanitizing service. Filters/Strainers—Bulletin BFS Built to sanitary standards. Low pressure drop and extended service. Bio-Pharm Systems—Bulletin BP A range of products for Bio-Pharm applications.
Your Partners in Processing For more information on Tri-Clovers complete line of products, contact your Tri-Clover distributor, or contact us at 262-694-5511.
©2000 Tri-Clover, Inc. MV 5M 4/00
