Genuine Aircraft Hardware Co.
MS24693 Series
Fully Threaded, 100 Deg.. Countersunk, Non Structural Screws, Phillips Drive These are NON STRUCTURAL fasteners that replace the AN507 Series.
Use the MS24693 series to replace AN507 screws of like material and finish. SEE THE CHARTS for desired size numbers. SEE CROSS REFERENCE on next page for Superseding Part Numbers
Do Not Order By AN507 Numbers
Shaded part numbers are not stocked; special order only.
HELP WITH THE SELECTION OF PART NUMBERS
USE ( S ) AFTER MS24693 & BEFORE (SIZE NUMBER), FOR LOW CARBON STEEL CAD II PLATED USE ( C ) AFTER MS24693 & BEFORE (SIZE NUMBER), FOR 300 SERIES STAINLESS STEEL, UNPLATED USE ( BB ) AFTER MS24693 & BEFORE (SIZE NUMBER), FOR BRASS WITH BLACK CHEMICAL FINISH
Examples of Part Numbers: MS24693S28 MS24693BB51 MS24693C272
30
= 6-32 Threads, 1/2” Overall length including the head, Cadmium II plated, Steel = 8-32 Threads, 5/8” Overall length including the head, Black chemical finish, Brass = 10-32 Threads, 1/2” Overall length including the head, Unplated, 300 series Stainless
Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.
All Original Text, Tables and Drawings are Copyright © by Genuine Aircraft Hardware Co. 2005
Genuine Aircraft Hardware Co.
Cross Reference Chart AN507 to MS24693 SCREWS ORDER BY MS24693 NUMBERS
SEE PREVIOUS PAGE FOR PART NUMBER BREAKDOWN
Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy. All Original Text, Tables and Drawings are Copyright © by Genuine Aircraft Hardware Co. 2005
31
