To start SinuComNc: Double-click on...
Startup tool SinuCom NC Start view MACHINE DATA BLOCK1: Display of the software options available...
Scrolling...
Activation of: 1x additional channel...
1
ü 1
DRAM cycles...
1x additional axis.
Activation of software options requiring reset of the NC kernel...
Three options were activated and no License Key input for licensing.
Change of view acc. to exclusively non- licensed options.
Visual highlighting of the desired options; licensed options, however, not yet.
Cyclic note with nonlicensed options. This is displayed if unregistered options have been loaded into the NCK!
Three options were activated and no License Key input for licensing.
View of exclusively non- licensed software options.
Start of Wizard...
Three options were activated and no License Key input for licensing.
Step 1: The envelope supplied contains the license label displayed. 1) The Software License Number and 2) Dispatch Note Number Software License Number
Dispatch Note Number
printed on it will be required later within the A&D MC Web License Manager.
Three options were activated and no License Key input for licensing.
T-MO4711007
Step 2: Display of the hardware properties: 1) Serial number of the hardware and 2) Hardware type This information will be required later for identifying the target hardware in the A&D MC Web License Manager.
Step Three options were activated and no License Key3:input for licensing.
Display of the Internet address of the Web License Manager. When you enter this address, you can call the A&D MC Web License Manager on the Internet.
http://www.siemens.com/automation/license
The A&D MC Web License Manager can be found here on the Internet!
After successful assignment of the licenses to the hardware by means of the Web License Manager, the License Key generated will be entered here later.
Call of an Internet browser... (Internet access required!)
http://www.siemens.com/automation/license/
Standard Web browser...
Input of the Internet address.... Direct Access on the basis of the license label.
Customer login for authorized partners.
Display of progress: Step 1 of 5: Login
TEST 1007 08154711007
Input of Software License Number resp. Dispatch Note Number.
Display of progress: Step 2 of 5: Identify product
T-MO4711007
Input of serial no. of hardware and hardware type
Display of progress: Step 3 of 5: Select licenses
Display of the licenses that are still free on the dispatch note selected. You have the possibility to register additional licenses. T-MO4711007
08154711007
ü
Display of progress: Step 4 of 5: Register licenses
Summary of the licenses selected for registration.
T-MO4711007
08154711007
TEST 1007
By pressing the
button, the licenses are assigned to the hardware stated.
By pressing "OK", the licenses are assigned irrevocably to the hardware assigned.
T-MO4711
TEST 1007
Display of progress: Step 5 of 5: Generate License Key
7S47BV
Follow this link if you need to assign further options to THIS hardware
The options are activated exclusively on the hardware stated using the License Key. The assignment must be made for each software option!
Test 1007
Change to the license manager of the target hardware...
Three options were activated and no License Key input for licensing.
http://www.siemens.com/automation/license
Step 3 (continuation): Assignment of the licenses to the hardware by means of the SinuCom NC LicenseManager.
7S47BV
Input of the License Key.
Three options were activated and no License Key input for licensing.
Cyclic note to non-licensed options is hidden after assigning the License Key!
http://www.siemens.com/automation/license
Assignment of the License Key requiring reset of the NC kernel...
Display of all software options.
Scroll...
Change the display of all nonlicensed software options.
Display all not licensed software options.
No unlicensed software option available... Thank you very much. The software options ordered have now been assigned completely to SINUMERIK 840Di. You can now use the options selected.
